• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.323-326
• /
• 1999

This paper describes a point matching method that is based on an expansion of the electromagnetic field in terms of a series of Bessel and modified Bessel functions multiplied by trigonometric functions. In this method, the electric and magnetic fields inside the waveguide core are matched to those outside the core at matching points on the boundary to yield matrix equations. As an example applying this method, the paper presents the results of the computation in the form of curves of the propagation constants in a semicircular optical waveguide, be formed by annealing for reduced insertion(radiation) loss when connected to optical fiber. The propagation curves are presented in a form of refractive index independent. Also, it presents relative energy distributions between inside the core and outside the core of various modes and presents field distributions.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.383-388
• /
• 2007

A color filter was demonstrated incorporating a patterned metal grating in a quartz substrate. The filter is created in a metal layer perforated with a symmetric two-dimensional array of circular holes, with the pitch smaller than the wavelength of the visible light. A finite-difference time-domain simulation was performed to analyze the device by investigating the effect of structural parameters like the grating height, the period, the hole size, and the refractive index of the hole-filling material on its performance. The device performance was especially optimized by controlling the refractive index of the material comprising the holes of the grating. And two different devices were fabricated by means of the e-beam direct writing with the following design parameters: the grating height of 50 nm, the two pitches of 340 nm for the red color and 260 nm for the green color. For the prepared device with the period of 340 nm, the center wavelength was 680 nm and the peak transmission 57%. And for the other device with the pitch of 260 nm, the center wavelength was 550 nm and the peak transmission was 50%. The filling of the hole with a material whose refractive index is matched to that of the substrate has led to an increase of ${\sim}15%$ in the transmission efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.16-16
• /
• 2010

GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.262-268
• /
• 2013

We study the focusing properties of a two-dimensional square-lattice photonic crystal (PC) comprising silica and germanium partitioned cylinders in air background. The finite difference time domain (FDTD) method with periodic boundary condition is utilized to calculate the dispersion band diagram and the FDTD method incorporating the perfectly matched layer boundary condition is employed to simulate the image formation. In contrast to the common square PCs in which the negative refraction effect occurs in the first photonic band without negative phase propagation, in our suggested model system, the frequency with negative refraction exists in the second band and in near-infrared region. In this case, the wave propagates with a negative phase velocity and the evanescent waves can be supported. We also discuss the dependency of the image resolution and its location on surface termination, source location, and slab thickness. According to the simulation results, spatial resolution of the proposed PC lens is below the radiation wavelength.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.25-30
• /
• 1998

In this paper, a simple scheme of optical interconnections between M input and N output terminals using mode speckle patterns generated in the mulitmode optical fiber is described. It is shown that fully parallel nonblocking interconnections are accomplished by using properly generated mode speckle patterns as destination codes and dectecting the generated mode speckle patterns separately using M multiplexed Vander Lugt matched filters at each output terminal. The orthogonality condition of mode speckle patterns is investigated by either changing the launching angles or rotating the polarization direction of the beam. Preliminary experiments by use of a 4$\times$4 graded refractive-index multimode fiber coupler whose core diameter was 50 ${\mu}{\textrm}{m}$ were performed to show the feasibility of our scheme.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.665-668
• /
• 2008

Multi-layered thin films of $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$, Cr, Al were deposited on glass substrate by evaporation process. As high and low refractive index material, $Fe_2O_3$ and $Na_3AlF_6$ were selected and additionally Cu, Al and Cr were chosen as mid reflective layer respectively. Optical properties including reflectance were systematically studied depending on optical thickness of $Na_3AlF_6$ especially $0.25{\lambda}$ and $0.5{\lambda}$. In order to expect the experimental result, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer at viewing angle $45^{\circ}C$, the $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$ show the colour rage between red and orange in $0.25{\lambda}$ and green and pupple in $0.5{\lambda}$ respectively. When the Al was used as mid reflective layers in $Fe_2O_3/Na_3AlF_6/Fe_2O_3$ system, typical yellow colour and mixed colour between green and pupple were appeared in $0.25{\lambda}$ and $0.5{\lambda}$ of $Na_3AlF_6$ respectively. As compared the experimental result to simulation data, it was found out that the experimental data is relatively well matched with the EMP simulation data.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2010

Fluorescent photopolymer film was prepared with composition containing acrylate monomer, binder, a visible light sensitive photo initiator, and fluorescent anthracene polymer. A fluorescent grating pattern was inscribed on the photopolymer film using a 2-beam coupling method. A 514 nm laser was coupled to generate a beam-interference pattern. A highly fluorescent diffractive line pattern was formed on the fluorescent photopolymer within 30 sec. of exposure. The fluorescence intensity was highly enhanced in the patterned area, possibly due to the change in the environment of the fluorescent polymers by the photo-polymerization of monomers. Under a photo-mask, a gap electrode pattern was formed of fluorescent gratings with a sub-micron scale, which was matched well to the calculated value ($2.5\;{\mu}m$ and $0.6\;{\mu}m$) based on the refractive index of the photopolymer and beam incident angle ($3.4^{\circ}$, $15^{\circ}$) to the photopolymer surface.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.5
• /
• pp.241-244
• /
• 2007

$MgF_2$/Cr/$MgF_2$, $MgF_2$/Cu/$MgF_2$ and $MgF_2$/Al/$MgF_2$ multi-layered thin films were fabricated by evaporation system. $MgF_2$ and Cr(Cu, And Al) was selected as a low refractive index material and mid reflector layer, respectively. Optical properties including color effect were systematically studied in terms of different film layer by using spectrophotometer. Experimental results were compared to the simulation result. The films consistings of $MgF_2$/Cr/$MgF_2$, $MgF_2$/Cu/$MgF_2$, $MgF_2$/Al/$MgF_2$ multi-layered thin films showed wavelength range of $430{\sim}780nm$, typically color range between greenish yellow and orange at view angle of $45^{\circ}$. It was confirmed that this experimental result was well matched with simulation result.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.579-584
• /
• 1998

Polymer dispersed liquid crystal(PDLC) composite films were made by polymerization induced phase separation method using UV-curing to investigate the effect of fabrication conditions, such as photoinitiator concentration, film thickness, polymerization temperature, and electric field during polymerization, etc., on the electro-optic properties. As the amount of photoinitiator increased, the driving voltage of PDLC device increased due to the increase of small-size liquid crystal phases. This was considered as the results from the increased interfacial area between liquid crystal (LC) and polymer matrix, since LC molecules at the interfacial regions were relatively difficult to response for the applied electric field. When the higher molecular weight oligomer (PTDA-1000) was used as matrix, the initial transmittance was observed to be relatively higher than that for the lower molecular weight oligomer (PTDA-250). Saturation transmittance for PTDA-1000 was observed at relatively lower voltage than that for PTDA-250, of which transmittance was not saturated even at 60 V. As polymerization temperature increased, the initial transmittance of resulting PDLC film increased due to the larger LC droplets formation and the more matched refractive index between LC and matrix than those cases for the lower polymerization temperature. Though driving voltage decreased for the thinner film, it was considered that optimum thickness of the film should be maintained to get some practical contrast, which is the ratio of off- and on-state transmittance. Furthermore, electro-optic properties such as initial transmittance, driving voltage, and response time were observed to be considerably affected by application of external field during polymerization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1545-1554
• /
• 2010

Korean government will set up the nationwide food safety system with strict control of hazardous nutrients like sugar, fatty acids and sodium as well as advanced nutrition education system. In addition, almost one hundred percent of school food service rate forced the government to consider more effective ways to upgrade the nutritional status of school meals. The object of our study was to provide the data on content and consumption of sugar in school meal for the nationwide project. For this purpose, we surveyed the sugar content of 842 school meal menus and their intake level for 154 days in 8 schools in Daejeon and Chungcheong Province. Sugar contents, the sum of the quantity of 5 sugars commonly detected in food, were analysed with HPLC-RID (Refractive Index Detector). Sugar intakes were calculated by multiplying the intake of each menu to the sugar content of that menu. The sugar content was highest in the desserts, which include fruit juices, dairy products and fruits. Sugar content of side dish was high in sauces and braised foods. Sugar intake from one dish is high in beverage and dairy product, and one dish meals contribute greatly to sugar intake because of their large amount of meal intake. The average lunch meal intakes of second grade and fifth grade elementary school students were 244 g/meal and 304 g/meal, respectively. The meal intake of middle school student was 401 g/meal. The average sugar intake from one day school lunch was 4.22 g (4.03 g on elementary and 5.31 g on middle school student), which is less than 10% of daily sugar reference value for Koreans. The result of this study provides exact data of sugar intake pattern based on the content of sugar which is matched directly to the meals consumed by the students.