• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.121-126
• /
• 2009

The internal flow field in a centrifugal pump working at the several flow conditions has been measured by using the particle image velocimetry (PIV) technique with the laser induced fluorescence (LIF) particles and the refractive index matched (RIM) facilities. The impeller of the centrifugal pump has an outlet diameter in 100mm, and consists of six two-dimensional curvature backward swept blades of constant thickness. Measured results give reliable flow patterns in the pump. It is obvious that application of LIF particle and RIM are the key methods to obtain the right PIV measured results in pump internal flow.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.189-195
• /
• 2006

Bragg detuning effect if, one of the serious problems if the photopolymer is used for the recording material of holography memories. And the critical reasons of that are known as the bulk refractive index change and shrinkage of recording material. However, the trials for analyzing the effect are mainly on the K-sphere and biased on the transmission hologram. So, we approached Bragg detuning effect numerically and applied the method to the transmission holograms and the reflection holograms all together. We simulated it with MATLAB. As a result, the bulk refractive index change causes+Bragg detuning effect on the transmission holograms and the reflection holograms. But the shrinkage leads to+Bragg detuning effect on the transmission hologram and-Bragg detuning effect on the reflective hologram. Compared to experimental result, the bulk refractive index change(${\fallingdotseq}4{\times}10^{-4}$) and the ratio of shrinkage to the thickness of the material(${\fallingdotseq}1.67{\times}10^{-3}$) could be matched with Bragg detuning effect on the transmission hologram and the reflection hologram.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.163-170
• /
• 2016

Because of rapid technological advancements, increased data rate support has become the key criterion for future communication medium selection. Multimode optical fibers and multicore optical fibers are well matched to high data rate throughput requirements because of their tendency to support multiple modes through one core at a time, which results in higher data rates. Using the numerical mode solver OptiFiber, we have designed a concentric core fiber by investigating certain design parameters, namely core diameter (µm), wavelength (nm), and refractive index profile, and as a result, the number of channels, material losses, bending losses, polarization mode dispersion, and the effective nonlinear refractive index have been determined. Space division multiplexing is a promising future technology that uses few-mode fibers in parallel to form a multicore fiber. The experimental tests are conducted using the standard second window wavelength of 1,550 nm and simulated results are presented.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.128-129
• /
• 2007

$ZnS/Na_3AlF_6$ multi-layer thin film were produced by evaporation system. ZnS were selected as a high refractive index material and $Na_3AlF_6$ were selected as low refractive index material. Optical properties including color effect were systematically studied in terms of different optical thickness by spectrophotometer. In oder to compare with experimental data, the Essential Macleod Program(EMP) was adopted that simulation program. The thin film consisting of $ZnS/Na_3AlF_6$ multi-layer show the wave length of $530{\sim}600nm$, typically color range between purple, blue, green. It was confirmed that this experimental result was well matched with simulation data.

• 전자공학회논문지D
• /
• 제35D권11호
• /
• pp.78-84
• /
• 1998

표면방전방식 AC PDP에서 내부 방전으로 생성된 광신호가 상판을 투과할때 발생하는 반사손실을 최적화하기 위하여 기존의 상판구조에서 후막 유전체의 상하면에 굴절율변조 다층박막을 도입하여 굴절율을 정합하는 방법을 사용하였다. 두개의 서로 다른 굴절율을 갖는 납유리를 혼합한후 sputtering 하여 굴절율을 변조시킨 다층 무반사막을 형성한 AC PDP 상판의 광투과율은 평균 85%로 측정되어 기존 방식 AC PDP 상판의 광투과율인 평균 70%에 비하여 약 15%의 광투과율이 개선됨을 보여주었다.

• 센서학회지
• /
• 제24권1호
• /
• pp.1-5
• /
• 2015

The V-grooved single-mode fiber in which a surface part of the core was removed was investigated as a quasi-distributed water detection sensor. In the normal state, the V-grooved region is filled and covered with a specific RI (Refractive Index)-matched medium, and the sensor experiences minimal optical loss. As water invades the V-grooved region, the material is dissolved and removed, and a considerable optical loss occurs owing to the large RI difference between the fiber core and water. The experimental results showed the feasibility of the device as a sensor element of the quasi-distributed water detection sensor system based on general optical time domain reflectometry (OTDR).

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.84-93
• /
• 1998

Planar graded index optical waveguides have been formed by Ag$^{+}$ ion exchange in the BK7 optical glass. The experimental results of diffusion and modal characteristics of Ag$^{+}$-Na$^{+}$ exchanged BK7 glass waveguides are presented. Measurements of the mode indices have been measured. We found the relations between the process and device parameters such as the diffusion depth and the square root of the diffusion time, diffusion coefficient and diffusion temperature, and diffusion ion concentration and surface index change. A theoretical gaussian function refractive index profile matched best with the measured data for all the guided modes. The empirical relations between the process and the device parameters are derived and subsequently used to formulate a systematic procedure for fabricating singlemode and multimode waveguides.uides.

• 폴리머
• /
• 제39권3호
• /
• pp.370-381
• /
• 2015

고분자와 용매의 굴절률이 서로 일치되어 자체 산란광의 세기가 극소화된 시스템인 폴리(비닐 아세테이트) (PVAc)/디메틸설폭사이드(DMSO) 계에 폴리스티렌 라텍스 탐침입자(표시 직경 200 nm)를 소량 첨가한 뒤 동적 광산란법으로 용액의 PVAc 농도에 대한 입자의 확산 거동을 정밀하게 조사하였다. 구형 입자의 환산확산계수의 농도의존성은 환산농도 $C[{\eta}]$의 신장지수함수로 분석할 수 있었고, 묽은 농도에서는 배제층의 두께가 일정하게 유지되었으나 초기 준희박 농도인 $1{\leq}C[{\eta}]{\leq}2.5$ 범위에서는 배제층의 사슬농도 의존지수가 -0.8로써 이론적 계산치 -0.85와 일치하였다. 그러나 보다 높은 농도에서는 배제층의 두께가 이론적 예측보다 급속히 감소하는 현상 또한 관찰되었으며, 그 원인은 인접한 탐침 입자들 사이에 존재하는 Oosawa 인력 때문인 것으로 설명할 수 있었다.

• 폴리머
• /
• 제31권4호
• /
• pp.335-342
• /
• 2007

장시간에 걸친 에이징이 carboxyl acid group을 포함한 수 백 나노 두께의 6FDA계 폴리이미드 박막에 미치는 영향을 박막의 가스투과도와 굴절률의 변화를 통하여 측정하였다. 에이징 시간에 따른 가스투과도의 변화는 carboxyl acid group을 포함한 박막이 이를 포함하지 않은 박막보다 빠른 투과도 감소와 선택도의 증가를 보였으며, 박막 특성의 정량적 분석을 위해 Lorent-Lorentz 이론을 통하여 volume relaxation을 정량화하였다. 박막의 밀도와 부분자유부피는 에이징 시간의 증가에 따라 지속적인 증가 혹은 감소의 경향을 보였으며, 에이징 시간에 따른 가스투과도와 부분자유부피간의 상관관계를 $P=Ae^{(-B/f)}$을 통하여 예측할 수 있었으며, 그 결과는 다른 고분자 분리막이 보인 경향과 일치하였다.