• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.521-529
• /
• 2022

This study evaluated the effects of agricultural reflective film and HANSPEK film on the fruit quality attributes and peel color variables of 'Fuji' apples. The reflective films were applied under the tree canopies at 20 and 30 days before harvest (DBH), and a tree with no films was used as the control. Depending on the measurement locations, the light intensity was 7.4 - 14.6% higher in the reflective film treatments than that of the control. However, no difference in the light intensity was observed between the reflective and HASPEK films. In addition, the light intensity was not also different between the 20 and 30 DBH. At harvest, the flesh firmness, fruit weight, soluble solids content, titratable acidity, and internal ethylene concentration were not different regardless of the type of reflective film and treatment time. In addition, the peel color variables were not affected in the equatorial region. However, in the calyx region, the L* and b* values were decreased, and the a* value was increased by the reflective and HANSPEK films compared with the control. Hence, the hue angle was decreased to near 0^o (red), and the peel color was improved. Therefore, this study suggests that the application of the HANSPEK film under a tree canopy could improve the fruit peel color of 'Fuji' apples.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.80-83
• /
• 2015

White reflective patterns are very difficult to fabricate, due to the scattering and reflection of light, especially when the pattern size goes down to micron size. A reflective white barrier structure of height $50{\mu}m$ and width $80{\mu}m$ was fabricated using dry-film resist as an intermediate reverse pattern. The reverse dry-film resist pattern was coated with an $SiO_2$ layer by sputtering, to protect the resist from chemical attack by the radical molecules in UV white resin. The UV white resin was applied on the dry-film resist pattern and then cured with ultraviolet light. The fine three-dimensional reflective patterns were finished by removing the dry-film resist.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.292-298
• /
• 1997

These studies were conducted to verify the effect of the supplementary lighting by reflective film mulching and its establishment in the north side of greenhouse on the utility of light at tomato by means of investigating changes of leaf temperatures, stomatal features, transpiration rates and photosynthetic rates. Stomatal density of leaves were high in the reflective film mulching but sizes of stomata were not different. As the osmotic potential in rooting zone was low, the stomatal resistance was high, transpiration rate was low, and leaf temperature was increased by 40.62$^{\circ}C$. And also in the block of reflective film mulching photosynthetic rates were decreased hut chlorophyll contents were not different. Especially, there is an effect of controlling greenhouse whiteflies by treatment of reflective film mulching. It is thought that the reason of high quality or increasing yield at several crops by supplementary lighting, such as reflective film mulching, would be caused by influences of absorption and distribution of nutrients through high transpiration rate and photosynthesis which resulted from increase of stomata.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.905-909
• /
• 2002

Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.49-59
• /
• 2007

The demand for the metal coil coated with reflective film is rapidly increasing with the increasing demand of notebook PCs and LCD monitors. During the coating process, it is very important to regulate tension of the coil metal since fluctuation of the tension can significantly degrade quality of the product. In this study, a tension controller has been developed for winding process of LCD reflective film coating. The controller has been tested on the existing coating facilities, and the results are to be given in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.427-431
• /
• 2006

We have studied electro-optic characteristics of reflective $45^{\circ}$ twisted nematic liquid crystal display which implement the new LC orientation using of in-cell retarder film. For the embodiment of reflective liquid crystal display, essentially the optic compensation films was always needed and attached to the outside of glass substrate. In our study, these optic compensation film were not employed in reflective LC cell. On other hand we have employed the in-cell retarder to substitute the optic compensation film and were able to orient the LC molecules using this in-cell retarder. So we have developed the reflective LC cell that has good optical performances without any additional coating process on the in-cell retarder.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.292-294
• /
• 2008

We have developed new reflective LCD for Mixed twist nematic LC mode with high quality image. We have found out an optimal twist angle of LC and optical film's axis by simulation. Also we measured electro-optic characteristics for new design panel. As a result, high reflectance and wide viewing angle characteristics were achieved.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.145-150
• /
• 2014

This study investigates the preparation of anti-reflective (AR) coating film to improve the efficiency of solar cell. The AR coating film was successfully obtained by dip-coating with AR coatings prepared by sol-gel method. Fluoroalkylsilane was additionally introduced into the coatings to give the self-cleaning effect of AR coating film. We performed the abrasion test, pencil scratch hardness test and cross-cut test to identify the mechanical strength of AR coating film. As the results, the transmittance of AR coating films with 9.07, 18.13 and 27.20 of IPA/MTMS molar ratios were 93.1, 93.6 and 95.3%, respectively. The water contact angle and transmittance of AR coating film increased by the introduction of hydrophobicity. The prepared AR coating film shows the high level of abrasion, hardness and adhesion. The IPA/MTMS molar ratio of 27.20 and the withdrawing speed range of 0.20 ~ 0.28cm/sec are the optimal coating condition in terms of the transmittance and mechanical strength of AR coating film.