• 한국환경과학회지
• /
• 제32권11호
• /
• pp.801-809
• /
• 2023

The purpose of this study is to predict the reflection distance following to the pulsing pressure, total air supplying, filter bag size using numercial analysis techniques and use it as an efficient operation condition and economic data for off-line type pulse air jet bag filter. In this research, filtration area 6 m² condition, calculate filter resistance coefficient for simulation through the main experiments using coke dust. Ansys fluent V19.0 apply to CFD simulation, and analysis pulsing characteristics about pulsing pressure, filtration velocity and nozzle diameter. The maximum reflecting distance of off-line type pulse air jet bag filter is 1,000 mm regardless of total air supplying at over the 42 L/m² conditions, that indicates off-line type can extend filter bag length 1,000 mm than on-line type. In order to effective primary and secondary pulsing of off-line type pulse air jet bag filter, over the 5 bar of pulsing pressure and over the 42 L/m² of total air supplying are needed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.352.2-352
• /
• 2002

In this paper, Power Flow Analysis (PFA) method has been applied to the prediction of vibration energy density and intensity of coupled shell structures in the medium-to-high frequency ranges. To consider the wave transformation at joint between shell elements, power transmission and reflection coefficients are investigated for various joint angles, and here Donnell-Mushtari thin shell theory has been used. (omitted)

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.221-228
• /
• 2002

Thickness of concrete lining, voids at the back of lining or shotcrete are very important elements for inspecting the safety of tunnels. Therefore, the inspection of tunnel lining structure means to investigate the inner layer boundaries of the structure. For this purpose, seismic reflection survey is the most desirable method if it works in good conditions. However, the conventional seismic reflection method can not be properly used for investigating thin layers in the lining structure. In other words, to detect the inner boundaries, it is desirable for the wavelength of source to be less than the thickness of each layer and for the receiver to be capable of detecting high frequency(ultrasonic) signals. To this end, new appropriate source and receiver devices should be developed above all for the ultrasonic reflection survey. This paper deals primarily with the development of source and receiver devices which are essential parts of field measuring system. Interests are above all centered in both the radiation pattern, energy, frequency content of the source and the directional sensitivity of the receiver. With these newly devised ones, ultrasonic physical modeling has been performed on 3-D physical model composed of bakelite, water-proof and concrete, The measured seismograms showed a clear separation of wave arrivals reflected from each layer boundary. Furthermore, it is noteworthy that reflection events from the bottom of concrete below water-proof could be also observed. This result demonstrates the usefulness of the both devices that can be applied to benefit the ultrasonic reflection survey. Future research is being focus on dealing with at first an optimal configuration of source and receiver devices well coupled to tunnel wall, and further an efficient data control system of practical use.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.367-370
• /
• 2009

It is important to reduce a reflection of light as a solar cell is device that directly converts the energy of solar radiation to electrical energy in oder to improve efficiency of solar cells. The antireflection coating has proven effective in providing substantial increase in solar cell efficiency. This paper investigates the formation of thin film PSi(porous silicon) layer on the surface of crystalline silicon substrates without other ARC(antirefiection coating) layers. On the other hand the formation of $SO_{2}/SiN_x$ ARC layers on the surface of crystalline silicon substrates. After that, the structure of PSi and $SO_2/SiN_x$ ARC was investigated by SEM and reflectance. The formation of PSi layer and $SO_{2}/SiN_x$ ARC layers on the textured silicon wafer result about 5% in the wavelength region from 0.4 to $1.0{\mu}m$. It is achieved on the textured crystalline silicon solar cell that each efficiency is 14.43%, 16.01%.

• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.1-16
• /
• 2021

Experimental and numerical investigations were conducted to study the performance of a surface-fixed horizontal porous wave barrier in regular waves. The characteristics of the reflection and transmission coefficients, energy dissipation, and vertical wave force were examined versus different porosities of the barrier. Numerical simulations based on 3D Reynolds Averaged Navier-Stokes equations with standard low-Re k-ε turbulent closure and volume of fluid approach were accomplished and compared with the experimental results conducted in a 2D wave tank. Experimental measurements and numerical simulations were shown to be in satisfactory agreement. The qualitative wave behavior propagating over a horizontal porous barrier such as wave run-up, wave breaking, air entrapment, jet flow, and vortex generation was reproduced by CFD computation. Through the discrete harmonic decomposition of the vertical wave force on a wave barrier, the nonlinear characteristics were revealed quantitatively. It was concluded that the surface-fixed horizontal barrier is more effective in dissipating wave energy in the short wave period region and more energy conversion was observed from the first harmonic to higher harmonics with the increase of porosity. The present numerical approach will provide a predictive tool for an accurate and efficient design of the surface-fixed horizontal porous wave barrier.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.15-20
• /
• 2005

댐체 안정성 문제는 무엇보다 투수 내지 누수 과정에서 유발될 수 있는 댐체 내부 결함(예: 균열)에 귀결된다고 볼 수 있다. 이러한 댐체 내부 결함은 댐 붕괴를 조장할 수 있기 때문에 우선 적절한 탐사 기법을 이용하여 그에 대한 위치 및 규모가 파악되어야 하며 그 결과에 따라 그라우팅에 의한 보수 작업 및 그에 대한 성과 검증 작업이 철저히 이루어져야 한다. 본 연구의 조사 대상이 된 댐은 중심 코어형 흙 댐으로 댐 소단 사면에는 누수로 인한 여러 형태의 결함이 관찰되고 있어 그에 대한 진단 및 보수 보강이 필요한 상태였다. 본 연구에서는 댐체 진단 및 그라우팅 성과 판단을 위해 그라우팅 이전(2001년 8월) 및 이후(2004년 11월)에 댐 마루 측선 상에서 고분해능 탄성파 반사법 탐사를 수행하였다. 탐사 자료의 질을 향상시키기 위해 표면파를 약화시키고 P파 반사파 에너지를 증대시킬 수 있는 발생원 에너지 방사형 변조 기법(P빔 발생원)도 응용되었다. 그라우팅 이전 탐사 결과(탄성파 중합단면도)에서는 댐체 내부 균열로 판단되는 강한 반사파가 일부 구간에서 인식되었으며, 그라우팅 이후 탐사 결과에서는 상기 강한 반사파가 인식되지 않음으로써 3년의 시차를 둔 두 개의 탄성파 탐사 결과는 댐체 진단 및 그라우팅 성과 판단을 위한 기본 자료로 반영될 수 있었다. 따라서 고분해능 탄성파 반사법 탐사는 댐 모니터링을 위한 하나의 바람직한 탐사 기법으로 크게 활용될 수 있을 것으로 기대된다.

• 지구물리
• /
• 제8권1호
• /
• pp.1-6
• /
• 2005

댐체 안정성 문제는 무엇보다 투수 내지 누수 과정에서 유발될 수 있는 댐체 내부 결함(예: 균열)에 귀결된다고 볼 수 있다. 이러한 댐체 내부 결함은 댐 붕괴를 조장할 수 있기 때문에 우선 적절한 탐사 기법을 이용하여 그에 대한 위치 및 규모가 파악되어야 하며 그 결과에 따라 그라우팅에 의한 보수 작업 및 그에 대한 성과 검증 작업이 철저히 이루어져야 한다. 본 연구의 조사 대상이 된 댐은 중심 코어형 흙 댐으로 댐 소단 사면에는 누수로 인한 여러 형태의 결함이 관찰되고 있어 그에 대한 진단 및 보수 보강이 필요한 상태였다. 본 연구에서는 댐체 진단 및 그라우팅 성과 판단을 위해 그라우팅 이전(2001년 8월) 및 이후(2004년 11월)에 댐 마루 측선 상에서 고분해능 탄성파 반사법 탐사를 수행하였다. 탐사 자료의 질을 향상시키기 위해 표면파를 약화시키고 P파 반사파 에너지를 증대시킬 수 있는 발생원 에너지 방사형 변조 기법(P빔발생원)도 응용되었다. 그라우팅 이전 탐사 결과(탄성파 중합단면도)에서는 댐체 내부 균열로 판단되는 강한 반사파가 일 부 구간에서 인식되었으며, 그라우팅 이후 탐사 결과에서는 상기 강한 반사파가 인식되지 않음으로써 3년의 시차를 둔 두개의 탄성파 탐사 결과는 댐체 진단 및 그라우팅 성과 판단을 위한 기본 자료로 반영될 수 있었다. 따라서 고분해능 탄성파 반사법 탐사는 댐 모니터링을 위한 하나의 바람직한 탐사 기법으로 크게 활용될 수 있을 것으로 기대된다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.133-134
• /
• 2004

DUPIC (Direct Use of spent PWR fuel In CANDU) fuel cycle technology is being developed at Korea Atomic Energy Research Institute (KAERI). All the DUPIC fuel fabrication processes are remotely conducted in the completely shielded M6 hot-cell located in the Irradiated Material Examination Facility (IMEF) at KAERI. Undesirable products such as spent nuclear fuel powder debris and contaminated wastes are inevitably created during the DUPIC nuclear fuel fabrication processes.(omitted)

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.479-486
• /
• 2012

Two of fundamental approaches that can be used to understand ion-solid interaction are Monte Carlo (MC) and Molecular Dynamic (MD) simulations. For the simplicity of simulation Monte Carlo simulation method is widely preferred. In this paper, basic consideration and algorithm of Monte Carlo simulation will be presented as well as simulation results. Sputtering caused by incident ion beam will be discussed with distribution of sputtered particles and their energy distributions. Redeposition of sputtered particles that are experienced refraction at the substrate-vacuum interface additionally presented. In addition, reflection of incident ions with reflection coefficient will be presented together with spatial and energy distributions. This Monte Carlo simulation will be useful in simulating and describing ion beam related processes such as Ion beam induced deposition/etching process, local nano-scale distribution of focused ion beam implanted ions, and ion microscope imaging process etc.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.433-437
• /
• 2002

Impact-collision ion scattering spectroscopy was applied to study the geometrical structure of epitaxially grown TiO layers on the MgO(100) surface. Hetero-epitaxial TiO layer was formed by thermal evaporation of titanium onto the MgO(100) surface followed by the exposure to oxygen at $400{\circ}$. The well-ordered TiO structure was confirmed by the impact-collision ion scattering spectroscopy and reflection high energy electron diffraction patterns. It is revealed that the Ti and O atoms are located on the on-top site of the MgO(100) surface and the TiO overlayers are composed of little three dimensional islands.