• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.115-134
• /
• 2007

This study proposes two new approaches for identifying damage patterns in a holed CFRP cross-ply laminate using an embedded fiber Bragg grating (FBG) sensor. It was experimentally confirmed that the reflection spectrum from the embedded FBG sensor was significantly deformed as the damage near the hole (i.e. splits, transverse cracks and delamination) extended. The damage patterns were predicted using forward analysis (a damage analysis and an optical analysis) with strain estimation and the proposed damage-identification method as well as the forward analysis only. Forward analysis with strain estimation provided the most accurate damage-pattern estimation and the highest computational efficiency. Furthermore, the proposed damage identification significantly reduced computation time with the equivalent accuracy compared to the conventional identification procedure, by using damage analysis as the initial estimation.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1080-1088
• /
• 1993

The residue compounds of sulfuric acid-carbon fiber system were obtained from P100, M40, TZ307, and T300 fibers. The fibers which easily formed intercalation compound had small change of d002 value, but, large change of diameter of fiber. It was considered that the cracks in carbon fiber were due to the this conflicting result. The resistivities of residue compound of carbon fibers were increased with the large change of diameter of fibers. It is thought that the reason of our results is increasing defects such as crack in fibers. From the UV reflection spectra, it was found that reflectances of residue compounds were all decreased and the residue compounds were more stable than intercalation compounds.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.609-615
• /
• 2006

균열 및 안치공법은 노후화된 콘크리트 슬래브의 줄눈 및 균열부의 과도한 움직임으로 인하여 아스팔트 덧씌우기층에 발생되는 반사균열을 억제하기 위해 기존의 노후화된 콘크리트 포장에 적정 간격의 불연속면을 형성시켜서 각각의 불연속면에서의 움직임을 작게 유지하는 공법으로 미국 등에서는 널리 사용되고 있다. 본 연구에서는 LTPP Data를 이용하여 균열 및 안치 공법 적용 후 IRI과 포장 파손 추이를 분석하여 공법 사용에 의한 공용성 변화에 미치는 영향을 고찰하였다.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.33-43
• /
• 2005

시멘트 안정처리 기층은 강성기층으로 러팅 저항성이 크고 상부하중 분산, 피로균열저항, 기층 보조기층의 파손 감소의 효과가 있으며 경제성이 뛰어나다는 장점이 있다. 그러나 건조수축에 의한 반사균열로 인하여 국내에서는 CTB가 전혀 적용되지 못하고 있는 실정이다. 따라서 본 연구는 국내에 CTB적용을 위한 기초연구로써 반사 균열을 최소화하기 위해 건조수축을 억제할 수 있는 저수축 시멘트 안정처리 기층 재료개발을 시도하였다. 건조수축 이론을 고찰하여 건조수축 저감방안을 수립하였고 건조수축에 미치는 영향인자를 선정하였으며, 각 혼화재의 메커니즘을 분석한 후 실내 실험 및 현장실험을 수행하였다. 예비실험을 통하여 플라이 애쉬 첨가비율은 25%로 제안하였고 시멘트량은 모든 배합이 도로공사 린 기층의 허용강도를 만족하는 7%로 하였다. 본 실험 결과를 바탕으로 강도, 건조수축율, 경제성을 고려한 결과, 플라이 애쉬 25%, 플라이 애쉬 25%에 팽창재를 10%를 혼합한 배합을 대안으로 결정하였다. 실내실험에서 결정된 대안을 현장 실험에 적용한 결과 플라이 애쉬(25%)+팽창재(10%)가 최적의 저수축 시멘트 안정 처리 기층 배합임을 제시하였다.

• 지질공학
• /
• 제3권2호
• /
• pp.167-176
• /
• 1993

Digital 지진계와 고성능 지오폰을 사용해서 고해상 지진파 탐사를 수행한다. 미소단층, 파쇄대, 균열대, 공동과 같은 지하구조를 탐지하기 위해서는 탐지목표물의 수평, 수직 고해상도를 올리는 것이 중요하다. 즉 Nyquist주파수는 기록지의 최고 주파수보다 커야 하고 또한 최고파수는 Nyquist파수($1/2{\Delta}x$)를 초과해서는 안된다. 최고 주파수는 저주파 통과 필터 혹은 Anit-alias 필터를 이용해서 제거되고 최고파수는 지오폰 간격 ${\Delta}x$를 조절해서 제외시킬 수 있다. 공통 발파 거리와 Single-end Shooting 방법에 의해서 얻어진 지진기록지는 적절한 최적간격, 저주파와 고주파 통과 필터, 그리고 지오폰 간격(0.5m~2m)을 이용해서 고해상도를 얻는다. 터널 상부 지표에서 Single-end Shooting에 의해서 획득한 반사지진파 기록지는 쌍곡선형의 Fraunhofer회절이 생기는 것을 볼 수 있다. 공통발파 기록에서는 터널을 통과한 초동이 낮은 진폭으로 감쇠되었고 공동에 의한 반사파는 지연된 단순 충격 파형(Single Impulsive Wave-form)임을 보여 준다. Cherveny와 Psencik(1983)의 Ray Method에 의한 이론적 결과도 실측 결과와 유사함을 알 수 있다. 즉 터널을 통과한 지진파는 지연되었고 반사된 파도 낮은 속도때문에 지연되어서 나오나 공동과 암석의 큰 음향 임피던스(Acoustic Impedance)는 강한 단순 충격파형을 보여주었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.507-510
• /
• 2007

Piston cores retrieved from the western Ulleung Basin, East Sea were analyzed to examine the potential for hydrocarbon generation and to determine the hydrocarbon indicators. 2D multi-channel reflection seismic and Chirp data were also investigated for mapping and characterizing the geophysical hydrocarbon indicators such as BSR (bottom simulating reflector), blank zone, pock-mark etc. High organic carbon contents and sedimentation rates that suggest good condition for hydrocarbon generation. High pressure and low temperature condition, and high residual hydrocarbon concentrations are favor the formation of natural gas hydrate. In the piston cores, cracks generally oriented to bedding may indicate the gas expansion. The seismic data show several BSRs that are associated with natural gas hydrates and underlying free gas. A number of vertical to sub-vertical blank zones were well identified in the seismic sections. They often show the seismic pull-up structures, probably indicating the presence of high velocity hydrates. Numerous pockmarks were also observed in the Chirp profiles. They may indicate the presence of free gas below the hydrate stability zone as well.

• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.424-427
• /
• 2016

이 논문에서는 FRP(Fiber Reinforced Polymer)의 내부 결함이나 물리적 손상을 검출하기 위하여 SAR(Synthetic Aperture Radar)를 이용한 마이크로파 비파괴 검사법(Microwave Nondestructive Inspecting)을 제안한다. 전파가 다층 유전체인 FRP에 수직으로 입사되면 계면이나 횡축 균열과 같은 결함에 좋은 반응을 나타낸다. 이때 반사파로부터 계면 깊이나 결함 위치를 SAR 이미지 기법으로 결함을 형상화할 수 있다. 그 결과, SAR 시스템으로 FRP 복합 소재 내부 결함들의 종류, 크기나 위치를 효율적으로 진단할 수 있음을 확인하였다.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.597-599
• /
• 2007

Studies on the hydrocarbons in shallow sediments of the East Sea of Korea have been carried out by the Korea Institute of Geoscience and Mineral Resources (KIGAM) since 2000. 4946 L-km of 2D multichannel reflection seismic data, 3250 L-km of high-resolution Chirp profiles and 16 selected piston cores were analyzed to determine the presence of hydrocarbons in shallow sediments of the western deep-water Ulleung Basin. The seismic data show a number of blanking zones that probably reflect widespread fluid and gas venting. The blanking zones are often associated with velocity pull-up structures. These upwelling structures are interpreted to be the result of high-velocity natural gas hydrate. There are also several bottom-simulating reflectors that are associated with free gas and probably overlying gas hydrate. Numerous pockmarks were also observed in the Chirp profiles. They are seafloor depressions caused by the removal of near-seafloor soft sediments by escaping of fluid and gas. In piston cores, cracks generally oriented parallel to bedding suggest significant gas content some of which may have been contained in gas hydrate in situ.

• Smart Structures and Systems
• /
• 제1권4호
• /
• pp.385-404
• /
• 2005

The paper presents a model to calculate reinforcement strain using measured crack width in members under applied tension, flexure, and/or shear stress. Crack mapping using a new type of distributed coaxial cable sensors for health monitoring of large-scale civil engineering infrastructure was recently proposed and developed by the authors. This paper shows the results and performance of such sensors mounted on near surface of two flexural beams and a large scale reinforced concrete box girder that was subjected to cyclic combined shear and torsion. The main objectives of this health monitoring study was to correlate the sensor's response to strain in the member, and show that magnitude of the signal's reflection coefficient is related to increases in applied load, repeated cycles, cracking, and reinforcement yielding. The effect of multiple adjacent cracks, and signal loss was also investigated. The results shown in this paper are an important step in using the sensors for crack mapping and determining reinforcement strain for in-situ structures.