• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2018

This work aims to suggest the most proper Hwangtoh color(ocher) for sidewalks and walkways located at the central part of the city. The actual colors of Hwangtoh samples that were obtained from 3 different locations (mountain walkways) in Busan were measured. In addition, personal preferences of such Hwangtoh colors were evaluated through survey in order to provide a proper standard reference color for urban walkways and sidewalks. With respect to the chromaticity of Hwangtoh obtained in Busan, $a^*$ and $b^*$ values were found to range from 3.6 to 13.6 and 11.4 to 23.4, respectively. It was also found that $L^*$ (lightness) values of 3 different Hwangtoh samples were found to be similar. According to the results from survey, higher values of $+a^*$ (red type) and $+b^*$ (yellow type) were preferred, indicating the red and yellow color needs to be developed stronger from Hwangtoh. Based on these findings, the proper Hwangtoh color used for walkways in urban area was chosen. It was found to be $L^*$ for 32.2~45.8, $a^*$ for 5.2~13.6, and $b^*$ for 15.8~21.2, respectively.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1241-1247
• /
• 1997

Gel-type fermented milk was prepared from milk or mixture of milk and apple juice/grape juice. Acid production (pH change) and growth of Lactobacillus acidophilus (KCTC 2182) were studied. The effects of juice addition on sensory property of fermented milk were also studied. The pH value of samples containing mixture of milk and apple juice/grape juice (25 mL : 25 mL to 5 mL : 45 mL) was lower than that of milk sample. However, number of viable cells of L. acidophilus at 21 hr in milk and samples containing juices was similar. During lactic fermentation for 24 hr, pH of all samples dropped significantly between 6 hr and 21 hr. pH values of mixture of milk and juices were lower than that of milk sample. Growth curve showed that lag phase continued to approximately 3 hr and log phase continued to approximately 15 hr in all samples. Number of viable cells in all samples was similar Sensory evaluation showed that overall acceptability of fermented milk prepared from apple juice/grape juice and milk (15 mL : 35 mL or 5 mL : 45 mL) was better than that of reference sample. The optimum ratio of mixture of juice and milk was 15 mL : 35 mL. The score values of sensory test of fermented milk prepared from mixture of grape juice and milk were slightly higher than those of mixture of apple juice and milk.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.423-446
• /
• 1993

Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.167-174
• /
• 2009

Recently, design technology of has been required such as catamaran yacht with high-speed according to expand a marine leisure industry. The domestic technical development for design and production of yacht is not actively than Canada, USA, Japan etc. However, with further development of yacht design & technology, it is need to develop a key technology related to increase the value of catamaran yacht. In the present paper, new guideline is suggest for catamaran yacht as like kinds of marine leisure ship in order for fundamental structure design and structural analysis for twin-hulled ship yacht and techniques for structural analysis as sea leisure ship in this research. The class of society has not been proposed formally about regulation and methodology for estimation of strength of small hight-speed craft with satisfying two conditions as noted; length less than 50meters, ratio of length to breadth less than 12. In the present study, we were adopted DNV (Yachts, Design Principles, Design Loads, Hull Structural Design) Rule and KR (FRP rule application guide) for scantling of structural members. Furthermore, ABS rule is used for structural calculation about application of loading conditions for catamaran yacht. This study can be available feedback role to manufacture of 38ft diffusion style for catamaran yacht. It is expected that this study will be a good reference in order to design of catamaran yacht with high-speed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.235-244
• /
• 2020

This study conducted a series of studies to offer a novel method of using CBS-dust that produced as by-product in the manufacture of cement. Four different contents of BS and CBS-dust were adopted for test parameters of this study. Mortar with 50% of W/B was fabricated. First, in the case of the fresh mortar, the flow decreased as the CBS-dust replacement rate increased, but the binder composition ratio BS 45% and 65% showed higher fl ow than Pl ain when repl acing CBS-dust 5%. In the case of air content, overall, the tendency was proportional to the CBS-dust replacement rate, and chloride tended to exceed the reference value at all replacement rates except for the CBS-dust 0% replacement. The compressive strength of the hardened mortar shows the resul t that the strength is improved when the CBS-dust is repl aced by 5% to 10%, and the CSH gel and structure formation is confirmed by microstructure analysis through the hydration reaction when the CBS-dust is replaced. Therefore, for a given condition CBS-dust is used as a early-strength admixture in a concrete secondary product that uses a large amount of admixture without reinforcing bars it can be an effective method for enhancing the strength of concrete as an alkali activator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.712-722
• /
• 2018

This paper conducts parametric studies on flapping wing design, one of the most important design parameters of insect-mimicking aerial vehicles. Experimental study on wing shape was done through comparison and analysis of thrust, pitching moment, power consumption, and thrust-to-power ratio. A two-axis balance and hall sensor measure force and moment, and flapping frequency, respectively. Wing configuration is biplane configuration which can develop clap and fling effect. A reference wing shape is a simplified dragonfly's wing and studies on aspect ratio and wing area were implemented. As a result, thrust, pitching moment, and power consumption tend to increase as aspect ratio and area increase. Also, it is found that the flapping mechanism was not normally operated when the main wing has an aspect ratio or area more than each certain value. Finally, the wing shape is determined by comparing thrust-to-power ratio of all wings satisfying the required minimum thrust. However, the stability is not secured due to moment generated by disaccord between thrust line and center of gravity. To cope with this, aerodynamic dampers are used at the top and bottom of the fuselage; then, indoor flight test was attempted for indirect performance verification of the parametric study of the main wing.

• KIISE Transactions on Computing Practices
• /
• v.21 no.10
• /
• pp.658-669
• /
• 2015

The paradigm of game development changes with technological trends. If the system can analyze and determine undefined inputs, users' input choices are not restricted. Therefore, game scenarios can have multifarious flows depending upon the user's input data. In this paper, we propose a method of including an output plan in the game system that is based on the user's input but is not restricted to predefined choices. We have implemented an experimental game on the Android platform by combining network communication and APIs. The game interface works as follows: first, the user's input data is transmitted to the server using HTTP protocol; then, the server carries out an analysis on the input data; and finally, the server returns the decision result to the game device. The game can provide users a scenario that corresponds to the decision results. In this paper, we used an image file for the user's input data format. The server calculates similarities between the user's image file and reference images obtained from the Naver Image Search API and then returns determination results. We have confirmed the value of integrating the game development framework with other computing technologies demonstrating the potential of the proposed methods for application to various future game interfaces.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.37-43
• /
• 2007

Purpose: Photogrammetry has been introduced as an alternative to direct measurement to obtain facial distances for a variety of anthropometric applications. The aim of this study is to establish morphological and functional value of an eye in Korean youths using specially designed computer software with digital photographic images. Methods: Authors measured anthropometry of an eye in Korean youths 1,449 individuals(622 males, 827 females) and analyzed stastically them. Results: The mean measurements are as follows. The diameter of cornea was $11.6{\pm}0.9mm$ in males and $11.3{\pm}0.9mm$ in females. The vertical dimension of palpebral fissure was $7.4{\pm}1.7mm$ in males and $8.2{\pm}1.6mm$ in females. The intercanthal width was $35.8{\pm}3.2mm$ in males and $34.4{\pm}2.9mm$ in females. The biocular width was $90.4{\pm}5.7mm$ in males and $87.4{\pm}5.3mm$ in females. The endocantion-superior margin of palpebral fissure distance was $12.7{\pm}1.4mm$ in males and $11.6{\pm}1.4mm$ in females. The horizontal dimension of palpebral fissure was $28.5{\pm}2.2mm$ in males and $27.4{\pm}1.9mm$ in females. The slant of palpebral fissure was $10.7{\pm}2.6^{\circ}$ in males and $11.3{\pm}3.0^{\circ}$ in females. The height of upper eyelid was $10.6{\pm}2.3mm$ in males and $10.7{\pm}2.3mm$ in females. The width of double fold was $2.0{\pm}0.7mm$ in males and $1.9{\pm}0.6mm$ in females. A double fold was seen in 21.9% of males and 44.9% of females. The most frequent shape of the double fold was type IV. The most common type of epicanthal fold was type III in both males and females. Conclusion: Photogrammetic measurement of large population using specially designed software could offer reliable data and these data could be useful reference for preoperative consultation, surgical planning and anthropometic study of eye.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.40-75
• /
• 2007

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company's mechanization and philosophy of management and been in efficiency. But being comply with "New Economic age," a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It's a good instrument of financial performance measure mold in the past years, But it's for measuring the past, couldn't formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non-financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

• Journal of Chest Surgery
• /
• v.47 no.3
• /
• pp.233-239
• /
• 2014

Background: As hypertrophied myocardium predisposes the patient to decreased tolerance to ischemia and increased reperfusion injury, myocardial protection is of utmost importance in patients undergoing aortic valve replacement (AVR) for severe aortic valve stenosis (AS). Methods: Consecutive 314 patients (mean age, $62.5{\pm}10.8$ years; 143 females) with severe AS undergoing isolated AVR were included. Postoperative myocardial injury (PMI) was defined as 1) maximum postoperative creatinine kinase isoenzyme MB or troponin-I levels ${\geq}10$ times of reference, 2) postoperative low cardiac output syndrome or episodes of ventricular arrhythmia, or 3) left ventricular ejection fraction of less than 55% and decrease in left ventricle (LV) ejection fraction of more than 20% of the baseline value. Results: There were 90 patients (28.7%) who developed PMI. There were five cases of early death (1.6%), all of whom had PMI. On multivariable analysis, the use of histidine-tryptophan-ketoglutarate (HTK) solution instead of blood cardioplegia (odds ratio [OR], 3.06; 95% confidence interval [CI], 1.63 to 5.77; p=0.001), greater LV mass (OR, 1.04; 95% CI, 1.01 to 1.07; p=0.007), and increased cardiac ischemic time (OR, 1.13; 95% CI, 1.05 to 1.22; p<0.001) were independent predictors for PMI. Patients who had PMI showed significantly inferior long-term survival than those without PMI (p=0.049). Conclusion: PMI occurred in a considerable proportion of patients undergoing AVR for severe AS and was associated with poor long-term survival. HTK cardioplegia, higher LV mass, and longer cardiac ischemic duration were suggested as predictors of myocardial injury.