• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.203-210
• /
• 2018

As the modernization of the nuclear instrumentation system progresses, research reactors have adopted digital wide-range neutron power measurement (DWRNPM) systems. These systems typically monitor the neutron flux across a range of over 10 decades. Because neutron detectors only measure the local neutron flux at their position, the local neutron flux must be converted to total reactor power through calibration, which involves mapping the local neutron flux level to a reference reactor power. Conventionally, the neutron power range is divided into smaller subranges because the neutron detector signal characteristics and the reference reactor power estimation methods are different for each subrange. Therefore, many factors should be considered when preparing the calibration procedure for DWRNPM channels. The main purpose of this work is to serve as a reference for performing the calibration of DWRNPM systems in research reactors. This work provides a comprehensive overview of the calibration of DWRNPM channels by describing the configuration of the DWRNPM system and by summarizing the theories of operation and the reference power estimation methods with their associated calibration procedure. The calibration procedure was actually performed during the commissioning of an open-pool type research reactor, and the results and experience are documented herein.

• 한국건강관리협회지
• /
• 제2권1호
• /
• pp.1-8
• /
• 2004

Background : Since 2001 the Korean Association of Health Promotion has attempted to establish her own reference valves that can be used in her all fifteen branch laboratories instead of using those adapted from the published data or there commended data by the reagent companies supplied as inserts. However, the previous two reference values derived from the statistics(year 2001 and 2002) were need to adjust to apply to actual practice. Besides there was an unavoidable situation that the reagent has to be changed to other companies in 2002 that creates another statistical problem. Subsequently, the third attempt to derive the reference ranges of tests in KAHP to solve those problems and define common)v acceptable reference ranges was done and and reported here. Methods : Al1 the results performed during January 2, 2003 through September 30, 2003 were collected in Excel tile format. All the data include dthe necessary information such as age and sex. The age was grouped in six; baby(0-3y), children(4-l2y), adolescent(13-l8y), adult(19-S4y), younger elderly (65-79y),old elderly(oyer 80y), with references of statistics in medical informatics and WHO classification. The data were statistically analyzed with SAS 6.04 for-Gaussian distribution as the previous two occasions. None of the tests showed Gaussian distribution. These procedures had been repeated twice or three times after trimming out the results lying outside three standard deviations. Though, all the tests showed non-Gaussian distribution. Subsequently, the reference ranges were defined in the range from the point of lower 2.5% to the point of higher 97.5 %. And in case the lower range could be "0", the reference ranges were defined in the range of 0 to 95%.Results : The reference ranges of most of 56 test items were newly assigned. Also with adaptation of the recommendation of WHO etc. on fasting blood sugar, hemoglobin, cholesterol. Among these there were eight tests that needed reference ranges by the age groups and nine tests by the sex. Conclusions : The third attempt will credit more the reference range of all15 laboratories of Korean Association of Health Promotion, which will be essential part of the better service to the patient and clients to visit KAHP.

• 정보통신설비학회논문지
• /
• 제8권3호
• /
• pp.152-156
• /
• 2009

This paper designs and implements wake up module for WBAN/USN sensor node which is using dynamic reference voltage demodulation circuit. When a comparator is used in a system for detecting received voltage level, comparator must have a reference voltage. However, the reference voltage is fixed, the system can communicate only a few range because received voltage level is changing widely due to distance of the wireless sensor nodes. Therefore, the proposed wake up module employs a dynamic reference voltage demodulation circuit for increasing communication range.

• 핵의학기술
• /
• 제16권1호
• /
• pp.108-114
• /
• 2012

면역측정법을 이용하는 검사실에서 가장 많이 사용하고 있는 상업용 제3자 정도관리물질이 BIO-RAD사에서 제공하는 물질이다. 현재 BIO-RAD 정도관리 물질에 포함된 Reference Sheet에는 비방사면역측정을 이용한 검사방법과 검사장비별로 각 측정물질의 Acceptable Range가 기재되어 있다. 그러나 방사면역측정법을 이용하여 검사하는 측정kit나 기기에 대해서는 실무에 적용할 만한 Acceptable Range에 대한 언급이 다소 부족한 것이 현실이다. 방사면역측정검사에 대한 Acceptable Range를 설정하여 검사결과의 객관성을 높이고 누적된 데이터를 제조사에 권고하여 발행되는 Reference Sheet에 기재하고자 한다. 본원에서는 2009년부터 부분적으로 BIO-RAD 정도관리 물질을 사용하여 2011년에는 일부 특정 항목을 제외한 대부분의 검사종목에 BIO-RAD 제 3자 정도관리물질을 사용하고 있다. 따라서 측정된 내부정도관리 데이터를 BIO-RAD사의 Unity Real Time program (version 1.0.9.27)을 이용하여 Acceptable Range를 설정하였다. BIO-RAD 정도관리 물질을 사용하는 약 50가지 검사종목의 20개 Point Data의 평균값, 표준편차, 변이계수를 구하여 측정kit별 Acceptable Range를 산출하였으며, 자동화 면역 측정기기인 Roche Elecsys/ E170/ cobas e Systems의 측정값과 비교하였다. 현재 시행하고 있는 외부정도관리 프로그램과 같이 BIO-RAD 정도관리 물질을 공통으로 사용하는 병원과 peer group을 설정하여 측정 kit별, 기기별 Acceptable Range를 제조사에 권고하여 Reference Sheet에 방사면역검사실에 적합한 Acceptable Range를 기재하여 검사결과의 객관성을 높이고 국내외적으로 방사면역측정법에 대한 인지도를 높이고자 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.181-185
• /
• 2001

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). The drive is based on Mode1 Reference Adaptive System (MRAS) using state observer as a reference model fat flux estimation. The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAS) with rotor flux linkages for the speed turning aignal at low speed range, two hysteresis controllers. The Proposed system is verified through simulation.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.61-65
• /
• 2014

The purpose of this study is to evaluate the applicability of the element stress to establish S-N design curve for the welded lap joint with thin plates below 2mm thickness. In order to do it, the extensive fatigue tests of the welded lap joints with INVAR alloy were performed. With the results, the deign S-N curves for the lap-weld were established by using the reference stresses such as the nominal stress range at the weld throat area, hot spot stress range and element stress range, and compared with regard to the standard deviation. The standard deviation of S-N curves with element stress range was less than that of S-N curves with other reference stresses. In addition, FEA results show the amount of the element stress is less sensitive to mesh size. Based on the results, it can be concluded that the element stress is to be used as the reference stress for the design S-N curves of the welded lap joint.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.207-214
• /
• 2016

In this paper, we propose a radial reference map-based location fingerprinting technique with constant spacing from an access point (AP) to all reference points by considering the minimum dynamic range of the received signal strength indicator (RSSI) obtained through an experiment conducted in an indoor environment. Because the minimum dynamic range, 12 dBm, of the RSSI appeared every 20 cm during the training stage, a cell spacing of 80 cm was applied. Furthermore, by considering the minimum dynamic range of an RSSI in the location estimation stage, when an RSSI exceeding the cumulative average by ${\pm}6dBm$ was received, a previously estimated location was provided. We also compared the location estimation accuracy of the proposed method with that of a conventional fingerprinting technique that uses a grid reference map, and found that the average location estimation accuracy of the conventional method was 21.8%, whereas that of the proposed technique was 90.9%.

• 한국통신학회논문지
• /
• 제37권2A호
• /
• pp.113-118
• /
• 2012

본 논문에서는 움직임 벡터의 상관도와 참조 화면의 거리를 이용한 H.264/AVC 움직임 탐색 지점 제거 방법을 제안한다. 결정된 탐색 영역을 이용하여 전 영역 탐색 방법에서 정화소 단위의 탐색 지점을 제거하고 향상된 예측 지역 탐색 방법에서는 불필요한 예측 움직임 벡터를 제거한다. 또한, 현재 화면에서 멀리 있는 참조 화면은 최적의 참조 화면으로 선택되는 빈도가 낮다는 특성을 이용하여 현재 화면과 참조 화면 사이의 거리를 이용한 가중평균을 적용하여 거리가 멀어질수록 전 영역 탐색 방법의 탐색 영역의 크기를 줄여 움직임 예측에 소요되는 시간을 줄인다. 향상된 예측 지역 탐색 방법의 경우, 멀리 있는 참조 화면에서 개선 과정을 적응적으로 생략하여 움직임 예측 시간을 줄인다. 제안한 방법을 통해 전 영역 탐색 방법은 평균 57.13%의 움직임 예측 시간이 감소되었고, 향상된 예측 지역 탐색 방법은 평균 14.71%의 움직임 예측 시간이 감소되었다.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.799-815
• /
• 2016

In this study, according to the reference setting based on the runoff video of 9:00 where the highest water level of 3.94 m has been recorded during the runoff of Cheon-mi Stream in Jeju Island by the attack of Typhoon no. 16 Sanba on September $17^{th}$, 2012, the error rate of long-distance and short-distance velocimetry and real-distance change rate by input error have been calculated and the input range value of reference point by stream has been suggested. In the reference setting process, if a long-distance reference point input error occurs, the real-distance change rate of 0.35 m in the x-axis direction and 1.35 m in y-axis direction is incurred by the subtle input error of 2~11 pixels, and if a short-distance reference point input error occurs, the real-distance change rate of 0.02 m in the x-axis direction and 0.81 m in y-axis direction is incurred by the subtle input error of 1~11 pixels. According to the long-distance reference point setting variable, the velocity error rate showed the range of fluctuation of at least 14.36% to at most 76.06%, and when calculating flux, it showed a great range of fluctuation of at least 20.48% to at most 78.81%.

• 대한임상검사과학회지
• /
• 제37권1호
• /
• pp.1-7
• /
• 2005

The purpose of this study was to verify (i) a consistent calibration verification for the assessment of method linearity and (ii) calibration agreement with calibration settings. We validated calibration verification through method linearity with different lot number of individual calibrators that span the working range for 9 tests except salicylate with control sample in test. We evaluated that it covered broad analyte range to assay from near zero to the top of the measuring range with 5 or 6 points every three times for 10 analytes in TDM test. Target values were plotted on X-axis with assigned or observed values on the Y-axis. Working range were as follows. Calibration verification of the measuring range (maximum to minimum values) has been validated asetaminophen 0.1 to $304.6_{\mu}g/mL$, salicylate 0 to $1005_{\mu}g/mL$, valproic acid 3.2 to $154.19_{\mu}g/mL$, digoxin 0.17 to 5.65 ng/mL, vancomycine 1.3 to $80.51_{\mu}g/mL$, carbarmazepine 0.1 to $22.3_{\mu}g/mL$, phenytonin 0.6 to $40.21_{\mu}g/mL$, theophyline 0.2 to $40.21_{\mu}g/mL$, primidone 0 to $24.07_{\mu}g/mL$, phenobarbital 0.6 to $60.0_{\mu}g/mL$. Drawing a straight line through five or six points of these data showed good linearity. We are sure that it is important to assess the calibration verification of a test method to ascertain the lowest and highest test results that are reliable.