• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.18 no.2
• /
• pp.85-87
• /
• 2007

The new research data and rapid development of psychotropic drugs over the past few years have warranted the development of clinical practice guidelines for managing pervasive developmental disorder(PDD). These guidelines are urgently needed due to the recent changes in social circumstances and clinical situations in Korea. Despite the many limitations and problems surrounding the development of these guidelines, the Korean Academy of Child and Adolescent Psychiatry(KACAP) has decided to develop the Korean Practice Parameters for the Treatment of PDD. The goal, basic principles, organization, and implications of this development project are introduced in this special paper. We expect these practice parameters to be a useful reference not only for child psychiatrists and other healthcare professionals in clinical practice, but also for the autistic patients themselves and their caregivers. The practice parameters shall be revised and improved in the near future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.339-343
• /
• 2009

The aim of the study was to investigate the statistical distribution of muzzle velocity of 155mm propelling charge K676 which is for the use of K9, a korean 155mm self-propelled artillery. A plenty of muzzle velocity data were collected from lot assessment test of propelling charge. The muzzle velocity of each test round is compensated by reference round. In the present work, the detailed statistical analysis of the muzzle velocity data is carried out using probability models including normal, Weibull 2-parameter and Weibull 3-parameter distributions. The results of goodness of fit test showed that the normal distribution described more appropriately the experimentally measured muzzle velocity data and the Weibull distribution is also applicable. The coefficient of variation showed that the mass production capability of each propelling charge lot has been maintained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.855-864
• /
• 2011

In this paper, a nonlinear controller based on adaptive back-stepping method is proposed for high performance operation of IPMSM(Interior Permanent Magnet Synchronous Motor). First, in order to improve the performance of speed tracking a nonlinear back-stepping controller is designed. Since it is difficult to control the high performance driving without considering parameter variation, a parameter estimator is included to adapt to the variation of load torque in real time. In addition, for the efficiency of power consumption of the motor, controller is designed to operate motor with minimum current for maximum torque. The proposed controller is applied through simulation to the a 2-hp IPMSM for the angular velocity reference tracking performance and load torque volatility estimation, and to test the MTPA(Maximum Torque per Ampere) operation in constant torque operation region. The result verifies the efficacy of the proposed controller.

• Health Policy and Management
• /
• v.19 no.4
• /
• pp.98-120
• /
• 2009

The purpose of this study is to elicit preference for drug listing decision criteria and to estimate the ICER threshold in South Korea using the discrete choice experiment (DCE) method. To collect the data, a DCE survey was administered to a subject sample either educated in the principle concepts of pharmacoeconomics or were decision makers within that field. Subjects chose between alternative drug profiles differing in four attributes: ICER, uncertainty, budget impact and severity of disease. The orthogonal and balanced designs were determined through computer algorithm to take the optimal set of drug profiles. The survey employed 15 hypothetical choice sets. A random effect probit model was used to analyze the relative importance of attributes and the probabilities of a recommendation response. Parameter estimates from the models indicated that three attributes (ICER, Impact, Severity of disease) influenced respondents' choice significantly(p${\pm}$0.001). In addition, each parameter displayed an expected sign. The Lower the ICER, the higher the probability of choosing that alternative. Respondents also preferred low levels of uncertainty and smaller impact on health service budget. They were also more likely to choose drugs for serious diseases rather than mild or moderate ones. Uncertainty however is not statistically significant. The ICER threshold, at which the probability of a recommendation was 0.5, was 29,000,000 KW/QALY in expert group and 46,500,000 KW/QALY in industry group. We also found that those in our sample were willing to accept high ICER to get medication for severe diseases. This study demonstrates that the cost-effectiveness, budget impact and severity of disease are the main reimbursement decision criteria in South Korea, and that DCE can be a useful tool in analyzing the decision making process where a variety of factors are considered and prioritized.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.140-148
• /
• 2000

A robust current control technique with a simple time delayed estimator for a permanent magnet synchronous m motor (PMSM) drive is presented. Among the various CWTent control schemes for a voltage source inverter-fed P PMSM drive, the predictive control is known to give a superior performance. This control technique, however, r requires the full knowledge of machine parameters and operating conditions, and gives an unsatisfactory r response under the parameter mismatch between the motor and controller. To overcome such a limitation, the d disturbances caused by the parameter valiations will be estimated by using a" time delay contTol approach and u used for the computation of the reference voltages by a simple feedforwal"d control. The proposed control $ scheme is implemented on a PMSM using the software of DSP TlVIS:32OC:30 and the effectiveness is verified d through the comparative simulations and experiments.periments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.703-710
• /
• 2012

At the stage of conceptual design of a helicopter, it is a general way using low fidelity analysis methods because of a large number of design calculations and trade-off studies. Determination of empirical parameters used in analysis codes for more practical design, depends on an user's design experiences, which effects on the accuracy and the fidelity of conceptual design results. Thus, more precise and logical method should be required to determine the empirical parameters used in the conceptual design of a helicopter. The present method is to be used not only in verifying the empirical parameters generated by design requirements, but also regenerate them if they contain any errors. Empirical parameters produced by present method were used to design a helicopter with a payload objective and performance constraints of an operating helicopter. As a result, weights and geometries of designed helicopter matched the target value within 5% significance level, proving that the suggested parameter generating method can be useful in the conceptual design of a helicopter.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.45-53
• /
• 2002

This paper presents an algorithm for the appropriate parameter selection of a power system stabilizer and power converters in two-area power systems with a series HVDC links. The method for PSS is one of the classical techniques by allocating properly poly-zero positions to fit as closely as desired the ideal phase lead and by changing the gain to produce a necessary damping torque. Proper parameter of power converters are obtained in order to have sufficient speed and stability margin to cope with changing reference values and disturbances based on the Root-locus technique. The small signal and transient stability studies using the PSS and power converters parameters obtained from these methods show that a natural oscillation frequency of the study case system is adequately damped. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.239-246
• /
• 2000

This paper presents a new dynamic approach for assessing feasibility associated with the implementation of accident management strategies by the operators. This approach includes the combined use of both the concept of reliability physics and a dynamic event tree generation scheme. The reliability physics is based on the concept of a comparison between two competing variables, i.e., the requirement and the achievement parameter, while the dynamic event tree generation scheme on the continuous generation of the possible event sequences at every branch point up to the desired solution. This approach is applied to a cavity flooding strategy in a reference plant, which is to supply water into the reactor cavity using emergency fire systems in the station blackout sequence. The MAAP code and Latin Hypercube sampling technique are used to determine the uncertainty of the requirement parameter. It has been demonstrated that this combined methodology may contribute to assessing the success likelihood of the operator actions required during accidents and therefore to developing the accident management procedures.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.945-952
• /
• 2009

The Three Mile Island Unit 2 (TMI-2) accident provides unique full scale data, thus providing opportunities to check the capability of codes to model overall plant behavior and to perform a spectrum of sensitivity and uncertainty calculations. As part of the TMI-2 analysis benchmark exercise sponsored by the Organization for Economic Cooperation and Development Nuclear Energy Agency (OECD NEA), several member countries are continuing to improve their system analysis codes using the TMI-2 data. The Republic of Korea joined this benchmark exercise in November 2005. Seoul National University has analyzed the TMI-2 accident as well as the currently proposed alternative scenario along with a sensitivity study using the Modular Accident Analysis Program Version 4.03 (MAAP4.03) code in collaboration with the Korea Hydro and Nuclear Power Company. Two input files are required to simulate the TMI-2 accident with MAAP4: the parameter file and an input deck. The user inputs various parameters, such as volumes or masses, for each component. The parameter file contains the information on TMI-2 relevant to the plant geometry, system performance, controls, and initial conditions used to perform these benchmark calculations. The input deck defines the operator actions and boundary conditions during the course of the accident. The TMI-2 accident analysis provided good estimates of the accident output data compared with the OECD TMI-2 standard reference. The alternative scenario has proposed the initial event as a loss of main feed water and a small break on the hot leg. Analysis is in progress along with a sensitivity study concerning the break size and elevation.

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2017

Delivering clear requirements of the military in the defense acquisition process is a key activity for successful weapon acquisition. In the field of defense, Operational Requirements Documents (ORDs) are prepared to derive and deliver the requirements of the military. In this study, we compare and analyze the form and content of the recent domestic ORD with reference to the US Department of Defense (DoD) ORD. As a result of the study, it is found that the domestic ORD form needs to be supplemented with in accordance with the purpose of the operation, while the requirement parameter, which is a core item of ORD, is insufficient. In order to address these issues, detailed contents of the ORD form suitable for the purpose of this study are presented. Also, we provide clear definitions, explanations, and examples of the operational system's key performance parameters and suggest ways to clearly communicate the requirements of the military.