• Bulletin of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.3-7
• /
• 1985

The general formulas for SCF atomic orbitals |5s > and |6p > have been derived separately by expressing the spherical harmonics part in terms of the coordinate($r_1,\;$r_2$) of the reference point, and by translating the exponential part, $r^4\;exp\;(-{\beta}r)$), in terms of $r_1,\;and\;r_2$ and the modified Bessel functions. Master formulas for overlap and dipole moment matrix elements are derived. The computed values of overlap and dipole moment matrix elements for hypothetical NO molecule are exactly in agreement with those for the previous methods.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1347-1350
• /
• 1998

The equivalent conductances for tetraethylammonium perchlorate (TEAP), tetrabutylammonium perchlorate (TBAP), tetrahexylammonium perchlorate (THAP), and tetradodecylammonium perchlorate (TDDAP) were measured in pyridine (Py) at 25 ℃. The measured data have been analyzed by Onsager conductance theory. From Kohirausch's law of independent migration of ion, the limiting ionic conductances of tetraalkylammonium ions were determined using the limiting ionic conductance of perchlorate cited from reference. Using those and viscosity of pyridine, the Stokes and hydrodynamic radii of tetraethylammonium, tetrabutylammonium, tetrahexylammonium, and tetradodechylammonium ions were calculated. And, the salvation numbers of corresponding ions were also calculated using the hydrodynamic and crystallographic radii and the volume of one pyridine molecule. From those results, the model of salvation for those ions was extracted by comparison with the model for ion salvation. And the electrostatic Gibbs free energy (ΔGel) fitted for our salvation model was calculated. Those of corresponding ions in pyridine at 25 ℃ also increased with increasing radii of tetraalkylammonium ions. This trend of ΔGel was explained by the different ion-solvent interaction between tetraalkylammonium ion and pyridine.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.575-580
• /
• 2001

Intramolecular ring-ring interactions in the model compounds, $8-methoxypsoralen-CH_2O(CH_2)n-adenine(MOPCH_2OCnAd$, n=2, 3, 5, and 6) in which 5' position of 8-methoxypsoralne (8-MOP) is linked by different polymethylene bridges to N9 of adenine, have been investigated by hypochromism measurements. Efficient ring-ring stacking interactions have been observed in $MOPCH_2CO2Ad$ (7) from the percent hypochromism(%H) and fluorescence spectra of the models and a reference molecule. The 8-methoxyposralen-adenine systems have shown stronger ring-ring stacking interaction than the psoralen-adenine system.

• Korean Journal of Pharmacognosy
• /
• v.52 no.3
• /
• pp.157-162
• /
• 2021

The heat-mediated reflux apparatus extraction of Paeonia lactiflora Pall. has been widely used as a traditional extraction method. In this paper, the microwave apparatus extraction method of Paeonia Radix was performed and the active ingredients and functional constituents were compared with the reference extraction method. The most effective extraction condition of albiflorin using the microwave was 120℃ in 50% methanol, and paeoniflorin was maximally extracted at 60℃. The reduced level of paeoniflorin molecule at high-pressure and high-temperature extraction condition was caused by the molecular instability. Additionally, the microwave extraction of 50% methanol extracts at 150℃ showed the highest functional constituents determined by in vitro DPPH radical scavenging activity, polyphenol concentration, and tyrosinase inhibition assay. The microwave apparatus was adapted as a rapid, low-cost, and environmentally friendly method to extract active ingredients and the practical extraction conditions of Paeonia Radix can be used in industrial applications.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1475-1481
• /
• 2008

B3 antibody specifically binds the $Lewis^Y$-related carbohydrate antigen of many carcinomas, and it is used as a model antibody in this study. In a previous study, the Fab fragment of the antibody was fused to a 38 kDa truncated form of Pseudomonas exotoxin A, PE38, to make Fab-PE38, where PE38 is fused to the Fd fragment of the Fab domain. This parent monomer molecule, Fab-PE38, had no cysteine in the hinge region, and it could not make a disulfide bond to form a disulfide bond bridged homodimer. In this study, we constructed three different kinds of divalent Fab-toxin fusion homodimers where the toxin is fused to the light chain of Fab, $(Fab-PE38fl)_2$. In addition to the PE38 toxin fused to the light chain, these three molecules have different hinge sequences hi, h2, and h3 making Fabh1-, Fabh2-, and Fabh3-PE38fl monomers, respectively. These hinges contain only one cysteine on different positions of the hinge sequence. The disulfide bond between the hinge region of two monomers forms homodimers $(Fabh1-PE38fl)_2$, $(Fabh2-PE38fl)_2$, and $(Fabh3-PE38fl)_2$. The refolding yields of these dimers were 5-16-fold higher than a previously constructed dimer where the PE38 was fused to the Fd fragment $(Fabh2-PE38)_2$ [8]. Our data suggest that the steric repulsion between the two PE38s in $(Fabh1-PE38)_2$ during disulfide bridge formation is relieved by fusing it at the end of the light chain. The best cytotoxicity value of these dimers showed about 2.5-fold higher on an MCF7 cell line than that of the monovalent reference molecule in ng/ml scale, which is 15-fold higher in pM scale.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.86-89
• /
• 2002

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 10[mN/m]. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/Poly-${\gamma}$ Benzyl $_D$-Glutamate/Al and Au/Poly-${\gamma}$ Benzyl $_D$-Glutamate/Au; the number of accumulated layers is 1, 3, 5 and 7. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. LB film accumulated by monolayer on an ITO. In the cyclicvoltammetry, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in $LiBF_4$ solution, stable up to 0.9V vs. Ag/AgCl.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.36-36
• /
• 2008

Organic light-emitting device (OLED) have become very attractive due to their potential application in flat panel displays. One important problem to be solved for practical application of full-color OLED is development of three primary color (Red, Green and Blue) emitting molecule with high luminous operation. Particularly, the development of organic materials for blue electroluminescence (EL) lags significantly behind that for the other two primary colors. For this reason, Flu-Si was synthesized and characterized by means of high-resolution mass spectro metry and elemental analyses. Flu-Si has the more wide optical band gap (Eg = 3.86) than reference material (Cz-Si, Eg = 3.52 eV). We measured the photophysical and electrochemical properties of Flu-Si. The HOMO-LUMO levels were estimated by the oxidation potential and the onset of the UV-Vis absorption spectra. The EL properties were studied by the device fabricated as a blue light emitting material with FIrpic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.723-726
• /
• 2002

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 10[mN/m]. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/Poly-$\gamma$ Benzyl $_D$-Glutamate/Al; the number of accumulated layers is 1, 3, 5 and 7. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. LB film accumulated by monolayer on an ITO. In the cyclicvoltammetry, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in $LiBF_4$ solution, stable up to 0.9V vs. Ag/AgCl.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.103.1-103.1
• /
• 2014

Due to their excellent optical and electrochemical properties, conjugated polymers have attracted much attention over the last two decades and employed to opto-electrical devices. In particular, conjugated polymers possess many attractive features that make them suitable for a variety of sensing task. For example, their delocalized electronic structures can be strongly modified by varying the surrounding environment, which significantly affected molecular energy level. In other word, conjugated polymers can detect and transduce the environmental information into a fluorescence signal. Conjugated polymers also display amplified quenching compared to small molecule counterparts. This amplified fluorescence quenching is attributed to the delocalization and migration of the excitons along the conjugated polymer backbones. Long backbones of conjugated polymer provide the transporting path for electron as a conduit, allowing that excitons migrate rapidly into quencher site along the backbone. This is often referred to as the molecular wire effect or antenna effect. Moreover, structures of conjugated polymers can be easily tailored to adjust solubility, absorption/emission properties, and regulation of electron/energy transfer. Based on this versatility, conjugated polymers have been utilized to many novel sensory platforms as a promising material. In this tutorial, I will highlight a variety of fluorescence sensors base on conjugated polymer and explain their sensory mechanism together with selected examples from reference literatures.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.189-196
• /
• 2014

Water dispersible ZnS based nanocrystals: ZnS (blue), ZnS:Cu (green) and ZnS:Mn (yellow-orange) were synthesized by capping the surface of the nanocrystals with a mercaptopropionic acid (MPA) molecule. The MPA capped ZnS based nanocrystal powders were characterized by using XRD, HR-TEM, EDXS, FT-IR, and FT-Raman spectroscopy. The optical properties of the colloidal nanocrystals were also measured by UV/Vis and photoluminescence (PL) spectroscopies in aqueous solvents. The PL spectra showed broad emission peaks at 440 nm (ZnS), 510 nm (ZnS:Cu) and 600 nm (ZnS:Mn), with relative PL efficiencies in the range of 4.38% to 7.20% compared to a reference organic dye. The measured average particle sizes from the HR-TEM images were in the range of 4.5 to 5.0 nm. White light emission was obtained by mixing these three nanocrystals at a molar ratio of 20 (ZnS):1 (ZnS:Cu):2 (ZnS:Mn) in water. The measured color coordinate of the white light was (0.31, 0.34) in the CIE chromaticity diagram, and the color temperature was 5527 K.