• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.820-828
• /
• 2008

In order to achieve high coding efficiency, H.264/AVC video coding standard adopts the techniques such as variable block size coding, motion estimation with quarter-pel precision, multiple reference frames, rate-distortion optimization, and etc. However, these coding methods have a defect to greatly increase the complexity for motion estimation. Particularly, from multiple reference frame motion estimation, the computational burden increases in proportion to the number of the searched reference frames. Therefore, we propose the method to reduce the complexity by controlling the number of the searched reference frames in motion estimation. Proposed algorithm uses the optimal reference frame information in both $P16{\times}16$ mode and the adjacent blocks, thus omits unnecessary searching process in the rest of inter modes. Experimental results show the proposed method can save an average of 57.31% of the coding time with negligible quality and bit-rate difference. This method also can be adopted with any of the existing motion estimation algorithm. Therefore, additional performance improvement can be obtained.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.312-317
• /
• 1996

This paper compares the output voltage control strategies of three-phase PWM inverter for uninterruptible power supply. The feedforward control, feedforward/feedback control, and decoupled feedback control in both the synchronous reference frame and the stationary reference frame are examined. In particular, it is shown that the response of the decoupled feedback controller in the synchronous reference frame can be improved by pole-zero cancellation method. It is also shown that the pole-zero cancellation method reduces to the deadbeat control, when it is implemented with digital controller.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.718-721
• /
• 2018

This paper presents an inter-prediction technique using deep learning, where a virtual reference frame of the current frame is synthesized by using the reconstructed frames to improve coding efficiency. Experimental results demonstrate that the proposed algorithm provides 1.9% BD-rate reduction on average as compared to HEVC reference software in the Random Access condition.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.183-190
• /
• 2000

In this research, the finite element analysis of piezocone penetration and dissipation tests have been conducted using the anisotropic elastoplastic-viscoplastic bounding surface model in the Updated Lagrangian reference frame for the large deformation and finite strain nu\ature of piezocone penetration. Accordingly, virtual work equation and corresponding finite element equations have been reformulated. Theory of mixtures has been incorporated to explain the behavior of the sol. It has been observed that the viscoplastic part of the soil model affected the whole formulation. The results of the finite element analysis have been compared and investigated with the experimental results. The formulations and the results are described in part 'I' and part 'II', respectively.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.292-294
• /
• 2007

Recently, for satisfying many application demands such as coding delay, computing power, transporting channel characteristic, etc, many profiles are supported in video coding standards. Therefore, in transcoding between same standards or between other standards, the functional difference of profiles supported by application occur many problems. In this paper, transcoding MPEG-2 main profile to H.264/AVC baseline profile which has restriction in the number of reference frame is focused. In this case, the bidirectional prediction supported in MPEG-2 main profile is not supported in H.264/AVC baseline profile. Also, in the restriction of reference frame, motion vectors in the MPEG-2 decoder as predictor should be adjusted. In this paper, the proposed algorithm is based on the characteristic of which motion. vector is uniform according to the distance from reference frame. The adaptive search techniques through the determination of the uniformity extremely reduce the computational complexity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.259-262
• /
• 2012

In this paper, we propose a new fast algorithm for effective scene change detection. The proposed algorithm exploits Otsu threshold matching technique, which was proposed earlier. In this method, the current and the reference frames are divided into square blocks of particular size. After doing so, the pixel histogram of each block is generated. According to Otsu method, every histogram distribution is assumed to be bimodal, i.e. pixel distribution can be divided into two groups, based on within-group variance value. The pixel value that minimizes the within-group variance is said to be Otsu threshold. After Otsu threshold is found, the same procedure is performed at the reference frame. If the difference between Otsu threshold of a block in the current frame and co-located block in the reference frame is larger than predefined threshold, then a scene change between those two blocks is detected.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.107-115
• /
• 2006

In this paper, a new speed sensorless control based on an instantaneous reactive power is proposed for the interior permanent magnet synchronous motor(IPMSM) drives. In proposed algorithm, the current observer estimates the line currents and the estimated speed can be yielded from the voltage equation because the information of speed is included in back EMF. To implement speed sensorless control, the current observer is composed by using the voltage equation of the IPMSM in the stationary reference frame fixed to the stator. The estimated speed of the rotor is composed by using the voltage equation of the IPMSM in the rotating reference frame fixed to the rotor The estimated speeds to minimize the speed error compensated by using the instantaneous reactive power. The instantaneous reactive power is calculated on the rotating reference frame fixed to the rotor. The effectiveness of the preposed algorithm is confirmed by the experiments.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.391-397
• /
• 2011

An inductance measurement method for interior permanent magnet synchronous machine (IPMSM) is proposed in this paper. In this method, the motor is measured at standstill condition, and only a 3-phase voltage source, an oscilloscope and a DC voltage source are required. Depending on the deductive dq-axis voltage equations in the stationary frame of reference, the dq-axis inductances at different current magnitude and vector angle can be calculated by the measured 3-phase voltages and currents. And hence, the saturation and cross-magnetizing effect of the inductances are measurable. This paper introduces the principle equations, experiment setup, data processing, and results comparison on the concentrated-winding and distributed-winding IPMSMs.

• Journal of Power Electronics
• /
• v.9 no.5
• /
• pp.718-725
• /
• 2009

To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.