• Nutrition Research and Practice
• /
• v.9 no.1
• /
• pp.57-62
• /
• 2015

BACKGROUND/OBJECTIVES: The prevalence of atopic dermatitis in infants is increasing worldwide. However, the nutrient intake status of infants with atopic dermatitis has not been studied properly. This study was conducted to compare the nutrient intake status of infants in the weaning period with atopic dermatitis by feeding type. MATERIALS/METHODS: Feeding types, nutrient intake status and growth status of 98 infants with atopic dermatitis from age 6 to 12 months were investigated. Feeding types were surveyed using questionnaires, and daily intakes were recorded by mothers using the 24-hour recall method. Growth and iron status were also measured. RESULTS: The result showed that breastfed infants consumed less energy and 13 nutrients compared to formula-fed or mixed-fed infants (P < 0.001). The breastfed group showed a significantly lower intake rate to the Dietary Reference Intakes for Koreans than the other two groups (P < 0.001). In addition, they consumed less than 75% of the recommended intakes in all nutrients, except for protein and vitamin A, and in particular, iron intake was very low, showing just 18.7% of the recommended intake. There was no significant difference in growth by feeding type, but breastfed infants showed a significantly higher rate of iron deficiency anemia (P < 0.001). CONCLUSIONS: Continuous management programs should be prepared for breastfed infants with atopic dermatitis, who are in a period when rapid growth takes place and proper nutrient intake is essential.

• The Korean Journal of Community Living Science
• /
• v.28 no.1
• /
• pp.5-16
• /
• 2017

This study was conducted to compare the nutritional status, nutrient intakes, and chronic disease risks of Chinese elderly people. MNA (Mini Nutritional Assessment) developed for elderly people was used to determine their nutritional status. In this study, participants consisted of 148 urban residents aged 65 years and over residing in three cities in Shandong Province, China. Participants were 67 (45.3%) men and 81 (54.7%) women, and average age was 72.8 years. According to MNA score, 77.7% of participants were 'well nourished', 22.3% were 'at risk of malnutrition', and 2% were 'malnourished'. Nutritional status was divided into two groups by MNA score as 'well nourished' and 'malnourished', which was formed with the combination of 'at risk of malnutrition' and 'malnourished'. Compared with the well nourished group, the malnourished group was older, and physical status indicators such as weight, BMI (Body Mass Index), and calf circumference of the malnourished group were much smaller. The malnourished group had higher prevalence rates of heart disease and stomach disorders while the well nourished group had a higher rate of hypertension. There was no significant difference between the malnourished group and well nourished group in nutritional intake below Chinese DRIs (Dietary Reference Intakes) among elder males. A higher proportion of elder females showed insufficient intakes of energy, protein, vitamin A, vitamin E, and zinc in the malnourished group compared to the well nourished group. The INQ (Index of Nutrition Quality) of calcium, magnesium, zinc, iodine, and most vitamins was less than 1 in both the malnourished and well nourished groups.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.353-363
• /
• 2017

The dynamics of a water-steam system in a once-through boiler was simulated based on the physics-based modeling approach, representing the system in response to large load change or scale disturbance simulations. The modeling considered the mass, energy conservation, and momentum equation in the water pipe and the focus was limited to the sub-critical pressure region. An evaporator tube modeling was validated against the reference data. A simplified boiler system consisting of economizer, evaporator, and superheater was constructed to match a 500 MW power boiler. The dynamic response of the system following a disturbance was discussed along with the quantitative response characteristics. The dynamic response of the boiler system was further evaluated by checking the case of an off-design point operation of the feedwater-to-fuel supply ratio. The results re-emphasized the significance of controlling the feedwater-to-fuel supply ratio and additional design requirements of the water-steam separator and spray attemperator.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.5
• /
• pp.493-502
• /
• 2020

The objective of this study was to investigate the effects of dietary vitamin B intake on biomarkers related to lipid metabolism, inflammation and blood glucose control, that are important in the development of type 2 diabetes and its complications. Seventy-six adults (42 males, 34 females) were recruited from a group of diabetes patients who had visited the medical center for treatment. Data on anthropometric characteristics and dietary intake of thiamine, riboflavin, niacin, vitamin B₆ and folate were collected using 24-hour diet recall and the CAN Pro 4.0 program. Also, data on clinical indices such as serum lipids, blood pressure, high-sensitivity C-reactive protein (hs-CRP), hemoglobin A1c (HbA1c) and homeostasis model assessment 2-insulin resistance (HOMA2-IR) were collected and analyzed for correlation with dietary vitamin B intake. Results from the dietary intake survey showed that riboflavin and folate intake (in males) and folate intake (in females) were below the Dietary Reference Intake for Koreans. Statistical analysis revealed a negative correlation between hs-CRP and dietary intake of B vitamins. Riboflavin intake was inversely associated with systolic blood pressure after adjustments for age, BMI, smoking, alcohol consumption, exercise, ingestion of diabetes mellitus medication and energy intake (p<0.05). Our results suggest that dietary vitamin B may influence inflammation and consequently may help in better management of type 2 diabetes.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.4
• /
• pp.330-343
• /
• 2017

Climate change is an important issue, with many researches examining not only future climatic conditions, but also the interaction of climate and air quality. In this study, a new version of the emissions processing software tool - Python-based PRocessing Operator for Climate and Emission Scenarios (PROCES) - was developed to support climate and atmospheric chemistry modeling studies. PROCES was designed to cover global and regional scale modeling domains, which correspond to GEOS-Chem and CMAQ/CAMx models, respectively. This tool comprises of one main system and two units of external software. One of the external software units for this processing system was developed using the GIS commercial program, which was used to create spatial allocation profiles as an auxiliary database. The SMOKE-Asia emissions modeling system was linked to the main system as an external software, to create model-ready emissions for regional scale air quality modeling. The main system was coded in Python version 2.7, which includes several functions allowing general emissions processing steps, such as emissions interpolation, spatial allocation and chemical speciation, to create model-ready emissions and auxiliary inputs of SMOKE-Asia, as well as user-friendly functions related to emissions analysis, such as verification and visualization. Due to its flexible software architecture, PROCES can be applied to any pregridded emission data, as well as regional inventories. The application results of our new tool for global and regional (East Asia) scale modeling domain under RCP scenario for the years 1995-2006, 2015-2025, and 2040-2055 was quantitatively in good agreement with the reference data of RCPs.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.637-647
• /
• 1993

Over 40 per cent Indian population needs to be attended for nutritional improvement. Traditional nutritious food resources though abundantly available but presently less used, if incorporated in the diets, can yield low-cost nutritionally balanced diets. The linear programming (LP)model was used for optimization of food resources to satisfy protein -energy requirements of hard working rural poor. Soybean-a highly nutritious food legume-available at reasonably low price was included along with chick -pea and pigeon -pea for comparison .The three cereals predominantly used in Indian diets -rice, wheat and sorghum -and three typical leafy vegetables namely, spinach , drumstick leaves and rajagira (Amaranths paniculantus) leaves were used for optimization . The contribution of food legume was restricted to supply only 50 per cent of daily protein requirement for maximum protein value. The quantities of other food stuffs namely , milk , sugar , tubers etc. were restricted to nati nal per capita availability. the nutrition satisfaction levels in per cent RDA by the model are 149-250 for protein , 51-106 for fat, 134-362 for iron an d143-1158 for Vitamin-A. Quantities of food legumes, cereals and leafy vegetables ranged from 289-601, 3000-3700 and 360-1200 g/day respectively for a reference family of five hard working rural poor. Daily food resources cost ranged from US$ 0.6 to 1.0 for the family. Amongst food legumes, soybean based diet combinations provide maximum nutritional benefits at minimum cost indicating its suitability for wider adoption by hard working poor.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.913-917
• /
• 2009

Flash memories have asymmetric I/O costs for read and write in terms of latency and energy consumption. However, the ratio of these costs is dependent on the type of storage. Moreover, it is becoming more common to use two flash memories on a system as an internal memory and an external memory card. For this reason, buffer cache replacement algorithms should consider I/O costs of device as well as possibility of reference. This paper presents WWCLOCK(Write-Weighted CLOCK) algorithm which directly uses I/O costs of devices along with recency and frequency of cache blocks to selecting a victim to evict from the buffer cache. WWCLOCK can be used for wide range of storage devices with different I/O cost and for systems that are using two or more memory devices at the same time. In addition to this, it has low time and space complexity comparable to CLOCK algorithm. Trace-driven simulations show that the proposed algorithm reduces the total I/O time compared with LRU by 36.2% on average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1594-1599
• /
• 2015

The world car industry is in an era of internal combustion engines in the past 100 years of environmental, energy and IT is eco-friendly, high-tech cars technologies are bringing an era of change. Until now, the study of new technologies in automobile research and development has been focused on. The car's new technology development is also important, but it's cutting-edge technology is used in the car before the car's performance, and became an important point in the customer experience improvement problems. New technology development, as well as effective for existing technology applied is also important. This study was to determine the effects of temperature and the performance of automobile engine and determine the cause of the content in accordance with the type(tap water, distilled water, underground water) of anti-freeze and water that is contained in the automotive engine cooling water for the effective application of the anti-freeze. In the freezing point of the coolant -10, -20, -30, -40, $-50^{\circ}C$ dynamo performance test was conducted with the numerical analysis. Water (distilled water) were measured at the reference point peak performance 71.112, 99.622hp freezing $-10^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.1-7
• /
• 2015

This paper is aimed to analyze the electrical and thermal signal such as ignition possibility, ignition time, thermal characteristics and arc fault power that are associated with electrical fire in case of the occurrence of series arc at IV wiring used for interior wiring at commercial power source. In order to analyze the signal, series arc was induced by generating the constant vibration through vibrating device in the one phase (R phase) and ignition possibility was analyzed along the condition of current value by adding cotton material to the contact point of wiring. The ignition time is shortened as the electric current value increased, burning time is not associated with current value and the temperature rose up to $740^{\circ}C$ though it was not ignited. It was checked out that the temperature was the energy source enough that can generate the fire related with insulation aging of wiring and the inflammable. The possibility of electrical fire by series arc was shown as more than 12% at 5A, more than 42% at 20A and arc showed 27W at 5A, 180W at 20A. It was confirmed that the possibility of electrical fire exists at the condition as above and the circuit breaker did not operate. This data can be used as the reference value for the investigation of electrical fire or development of the circuit breaker.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.85-99
• /
• 2014

PURPOSES : This study has been performed with the objective to determine threshold zone luminance of adaptation luminance by target safety level in a vehicular traffic tunnel with design speed set at 100km/h. METHODS : The study made a miniature capable of portraying changes in luminance distribution within $2{\times}10^{\circ}$ conical field of view of the driver approaching to the tunnel for the test. Test conditions were set based on justifications for CIE 88-1990's threshold zone luminance used as a reference by domestic tunnel light standards (KS C 3703 : 2010). Luminance contrast of object background and object is 23%, object presentation duration is 0.5 seconds, and size of the object background is $7.3{\times}11.5m^2$ RESULTS : Threshold zone luminance was set within adaptation luminance of $100{\sim}3,000cd/m^2$. Adaptation luminance and threshold zone luminance based on 50%, 75% and 90% target safety level all showed a relatively high linear relationship. According to findings in the study, it is not appropriate to specify the relationship between adaptation luminance and threshold zone luminance as luminance ratio. Rather, direct utilization of the linear relationship gained from the study findings appears to be the better solution. CONCLUSIONS : Findings of this study may be used to determine operation of threshold zone luminance based on target safety level. However, a proper verification and validity of test results are required. Furthermore, a study to determine proper threshold zone luminance level considering target safety level reviewed in this study and various decision-making factors such as economic conditions in Korea and energy-related policies should be carried out in addition. Additional tests on adaptation luminance greater than $3,000cd/m^2$ will be performed, through which application scope of the test findings will be broadened.