• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.737-760
• /
• 2022

For the geological disposal of high-level radioactive wastes (HLW), an understanding of deep subsurface environment is essential through geological, hydrogeological, geochemical, and geotechnical investigations. Although South Korea plans the geological disposal of HLW, only a few studies have been conducted for characterizing the geochemistry of deep subsurface environment. To guide the hydrogeochemical research for selecting suitable repository sites, this study overviewed the status and trends in hydrogeochemical characterization of deep groundwater for the deep geological disposal of HLW in developed countries. As a result of examining the selection process of geological disposal sites in 8 countries including USA, Canada, Finland, Sweden, France, Japan, Germany, and Switzerland, the following geochemical parameters were needed for the geochemical characterization of deep subsurface environment: major and minor elements and isotopes (e.g., ³⁴S and ¹⁸O of SO₄^2-, ¹³C and ¹⁴C of DIC, ²H and ¹⁸O of water) of both groundwater and pore water (in aquitard), fracture-filling minerals, organic materials, colloids, and oxidation-reduction indicators (e.g., Eh, Fe²⁺/Fe³⁺, H₂S/SO₄^2-, NH₄⁺/NO₃^-). A suitable repository was selected based on the integrated interpretation of these geochemical data from deep subsurface. In South Korea, hydrochemical types and evolutionary patterns of deep groundwater were identified using artificial neural networks (e.g., Self-Organizing Map), and the impact of shallow groundwater mixing was evaluated based on multivariate statistics (e.g., M3 modeling). The relationship between fracture-filling minerals and groundwater chemistry also has been investigated through a reaction-path modeling. However, these previous studies in South Korea had been conducted without some important geochemical data including isotopes, oxidationreduction indicators and DOC, mainly due to the lack of available data. Therefore, a detailed geochemical investigation is required over the country to collect these hydrochemical data to select a geological disposal site based on scientific evidence.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.761-772
• /
• 1998

This study was performed to determine the optimum coagulant dosing amount for effective treatment of raw water. The removal rate of turbidity and the variations of water qualities according to various dosage of coagulants such as Alum, PAC and PACS were investigated. The optimum coagulant dosing amount to make the lowest turbidity of water were 35mg/ι t of Alum, 30mg/ι of PAC and 10mg/ι of PACS in case of 5 NTU of raw water turbidity, and 30mg/ι of Alum, 25mg/ι of PAC and 10mg/ι of PACS in case of 10 NTU of that, respectively. The removal rates of turbidity at 4 min. and 8 min. of settling time were 10 and 72% of Alum, 44 and 62% of PAC and 25 and 55% of PACS in case of 5 NTU, and 52 and 70% of Alum, 90 and 95% of PAC and 10 and 28% of PACS in case of 10 NTU, respectively. Judging from the settling capability of floc., the reaction time of floe. formation and removal efficiency of turbidity, PAC was evaluated as more effective coagulant than Alum and PACS. Also PAC was regarded as the most effective coagulant when the water supply was changed sharply and the fluctuation of the surface loading occured with wide and sharp in settling basin. pH and alkalinity of the water were decreased with increasing coagulants dosage. But pH and alkalinity were not decreased below 5.8 which is the standard for drinking water quality, and 10mg/ι which is the limit concentration of floc. breakage, respectively. Residual Al of the treated water was decreased with increasing coagulants dosage in case of 5 and 10NTU of raw water turbidity. $KMnO_4$ consumption of the water was decreased with increasing coagulants dosage. The reduction rate of $KMnO_4$ consumption at the optimum coagulants dosage were 39% of Alum. 18% of PAC and 11% of PACS in case of 5 NTU of raw water turbidity, and 42% of Alum, 27% of PAC and 36% of PACS in case of 10 NTU of that, respectively. Any relationship was not found between the removal rate of turbidity and KMnO$_4$ consumption. TOC of the water was a bit decreased with increasing coagulants dosage up to 30mg/ι but not changed above 30mg/ι of coagulants dosage. The degree of TOC reduction was increased in the order of Alum, PAC and PACS treatment. Zeta potential of the colloidal floe. at the optimum coagulants dosage was in the range of -20~-15mV in case of 5 NTU of raw water turbidity and 0~0.5mV in case of 10 NTU of that. respectively. Although the kinds and dosages of coagulants were different, zeta potential range were fixed under the conditions of the best coagulation efficiency.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.783-791
• /
• 2015

A fluidized-bed reactor with an inside diameter of 0.1 m and a height of 1.2 m was used to study the effect of steam and catalyst additions to air-blown biomass gasification on the production of producer gas. The equipment consisted of a fluidized bed reactor, a fuel supply system, a cyclone, a condenser, two receivers, steam generator and gas analyzer. Silica sand with a mean particle diameter of $380{\mu}m$ was used as a bed material and calcined dolomite ($356{\mu}m$), which is effective in tar reduction and producer gas purification, was used as the catalyst. Both of Korea wood pellet (KWP) and a pellet form of EFB (empty fruit bunch) which is the byproduct of Southeast Asia palm oil extraction were examined as biomass feeds. In all the experiments, the feeding rates were 50 g/min for EFB and 38 g/min for KWP, respectively at the reaction temperature of $800^{\circ}C$ and an ER (equivalence ratio) of 0.25. The mixing ratio (0~100 wt%) of catalyst was applied to the bed material. Air or an air-steam mixture was used as the injection gas. The SBR (steam to biomass ratio) was 0.3. The composition, tar content, and lower heating value of the generated producer gas were measured. The addition of calcined dolomite decreased tar content in the producer gas with maximum reduction of 67.3 wt%. The addition of calcined dolomite in the air gasification reduced lower heating value of the producer gas. However The addition of calcined dolomite in the air-steam gasification slightly increased its lower heating value.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.1-16
• /
• 1975

The newborn human is the only mammalian whose mother does not have a food supply ready for it's offspring at birth. From two to four days usually elapse before the mother's supply If milk appears, and during this period, some kind of artificial feeding should be supplied to the infants. Because of this factor, there has been continued debate fog the past hundreds of years as to when the first feeding should be started Accordingly, many experiments were carried out by scholars and because of these, Pre-lateral feedings were believed to be necessary. Many types of pre-lateral feedings were tried and the conclusion was reached that glucose water was the best food for the first infants'feedings. Traditionally, This has been started 12 hours after birth. The causes for the 12 hours delay were thought to (1) provide rest for the infants: (2) prevent regurgitation ana vomiting which tended to be prevalent during this tine: (3) in cases of low weight infants, prevention of aspiration pneumonia. From recent studies of newborn physiology and as pediatric medicine has been rapidly advancing, many studies hare been carried out concerning the improvement of infant nutrition and the early feeding of infants has been emphasized. This author believes it would be very beneficial to try two different kinds of feedings for the infant. (1) experimental feedings ana (2) comparative feeding, and during this period to investigate and compare the infants blood sugar level, hematocrit, gamma globulin level weight changes and to observe the infant reaction ill order to search for a more desirable feeding program. This study was conducted from January to March 1974 with data related to 40 healthy newborn infants (male 21, female 19: weight, 2.79∼4.20㎏ : gestation, 39∼40 weeks) born at Ewha Womens University Hospital and the results obtained were as follows : 1. At time of birth the blood sugar level from the cord sample averaged 88.99㎎/100㎖, but the blood sugar level rapidly dropped after 2 to 3 hours and reached the lowest point after 10 to 11 hours (54.48㎎/100㎖) and rose again by the 24 hour time period (76.80㎎/100㎖). Changes in the blood sugar level of the experiments: groups and the compare-five group was not significantly different until the 6 to 7 hour period, but by the 10 to 11 hour period the blood sugar levels of the experimental group (49,10㎎/100㎖) and the comparative group (49.70㎎/100㎖) were lower than the remainder of the experimental groups. 9. There ware no significant weight changes between the two groups. Average weight at birth was 3.35㎏, but at the 24 hours period birth weight averaged 3.29㎏. (1.8% reduction of birth weight). It continually lowered until at 48 hours, average weight was 3.26㎏ (2.7% reduction from birth weight.) 3. Hematocrit readings showed no significant difference between the groups. Hematocrit, the average value at birth, was 28.07% and abruptly elevated to average 64.35% at the 2 to 3 hour period, then slowly lowered to an average of 59.67% at the 6 to 7 hour period, 55.10% at the 10 to 11 hour period, ana 53.70% at the 24 hour period. 4. At birth, average gamma globulin value averaged 1,39㎎/100㎖. and at the 24 hour period averaged 1,52㎎/100㎖ revealing no significant difference between the two feeding groups. 5. Such factors as voiding, passing of meconium, regurgitation and vomiting showed no significance between the two feeding groups. However, the number of infants voiding and passing meconium in the experimental groups during the first 12 hours was slightly greater. In general there was an increased tendency for regurgitation and. vomiting among a small group of the infants during the first 24 hours which thereafter decreased. 6. Fluid intake averaged 24.38cc at the first feeding and increased to average 30.48cc at the third feeding and further increased to 73. 00cc at the fifteenth feeding. Finally it was suggested that the most reasonable method of early feeding is to give less than 25cc of 5% glucose water and/or 8% powdered milk at 8 to 9 flours after birth in order to prevent hypoglycemia and dehydration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.875-880
• /
• 2012

This study was conducted to investigate the level of contamination of pathogenic Escherichia (E.) coli in 50 types of red pepper powders collected domestically. Pathogenic E. coli was confirmed using real-time PCR to confirm the 4 types of EAEC, EPEC, EHEC and ETEC. One sample out of 50 was contaminated with pathogenic E. coli. The type of pathogenic E. coli detected in the sample was EAEC. This study was also conducted to determine the effect of alcohol treatment on the reduction of E. coli populations in red pepper powder. The amount of E. coli in the control was $1.2{\times}10^6$ cfu/mL. The amount of E. coli in 10 minutes immersion treatment with 10% alcohol was $1.1{\times}10^6$ cfu/mL. In samples treated with over 20% alcohol, E. coli was not detected. This showed that 10 minutes of immersion in over 20% alcohol might be effective to reduce E. coli. This study was also conducted to determine the effect of UV irradiation on E. coli reduction. The number of E. coli in the control group was $5.0{\times}10^5$ cfu/mL. However, the number of E. coli in 45 min of the UV irradiated sample decreased to $1.0{\times}10^3$ cfu/mL, by $10^2$ cfu/mL. In contrast, E. coli was not detected in an over 60 min UV irradiated sample in $10^{-2}dilution$. This study showed that over 20% alcohol treatment and UV irradiation for 60 min was effective to control E. coli in red pepper powder.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.276-282
• /
• 2013

The reclaimed water has been highlighted as a representative alternative to solve the lacking water resources. This study examined the reduction of residual free chlorine by temperature (5, 15, $25^{\circ}C$) and initial injection concentration (1, 2, 4, 6 mg/L) in the reclaimed water and carried out propose on the calculating method of the optimal chlorine dosage. As the reclaimed water showed a very fast reaction with chlorine at the intial time comparing to that of drinking water, the existing general first-order decay model ($C_t=C_o(e^{-k_bt})$) was not suitable for use. Accordingly, the reduction of residual free chlorine could be estimated in a more accurate way as a result of applying the exponential first-order decay model ($C_t=a+b(e^{-k_bt})$). ($r^2$=0.872~0.988). As a result of calculating the bulk decay constant, it showed the highest result at 653 $day^{-1}$ under the condition of 1 mg/L, $25^{\circ}C$ for the initial injection whereas it showed the lowest result at 3.42 $day^{-1}$ under the condition of 6 mg/L, $5^{\circ}C$ for the initial injection. The bulk decay constant tends to increase as temperature increases, whereas the bulk decay constant tends to decrease as the initial injection concentration increases. More accurate calculation for optimal chlorine dosage could be done by using the experimental results for 30~5,040 min, after the entire response time is classified into 0~30 min and 30~5,040 min to calculate the optimal chlorine dosage. In addition, as a result of calculating the optimal chlorine dosage by temperature, the relationships of initial chlorine demand (y) by temperature (x) could be obtained such as y=1.409+0.450x to maintain 0.2 mg/L of residual free chlorine at the time after 4 hours from the chlorine injection.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.47-56
• /
• 2008

pH and Eh were measured at 25 points in the abandoned Dalcheon mine. And, major ion components $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-},\;CO_3^{2-},\;HCO_3^-)$ were analyzed through groundwater sampling at 41 points. pH and Eh were measured the highest concentration in serpentinite area. And, pH was between weak alkaline and intermediate values in study area. Groundwater in study area was dominated oxidation-reduction environment caused by reaction with carbonate rock. Because sulfur components contained in carbonate, serpentinite, arsenopyrite and pyrite was dissolved by groundwater, $SO_4^{2-}$ component was high in study area. And $Ca^{2+},\;Mg^{2+}$ of cations were high. Correlation coefficients of ion components in tailing dumps were 0.95 between $Ca^{2+}\;and\;SO_4^{2-}$, 0.86 between $Ca^{2+}\;and\;Mg^{2+}$, 0.85 between $Mg^{2+}\;and\;SO_4^{2-}$. Correlation coefficients of ion components in bedrock were 0.86 between $Mg^{2+}\;and\;SO_4^{2-}$, 0.68 between $Ca^{2+}\;and\;SO_4^{2-}$. Concentration range of $Ca^{2+}$ in tailing dumps was $6.85{\sim}323.58mg/L,\;and\;3.18{\sim}207.20mg/L$ in bedrock. Concentration range of $SO_4^{2-}$ in tailing dumps was $21.54{\sim}1673.17mg/L,\;and\;2.04{\sim}1024.64mg/L$ in bedrock. By the result of Piper diagram analysis with aquifer material, groundwater in tailing dumps was $Ca-SO_4$ type. Groundwater quality types with bedrock material were Mg-$SO_4$ and Mg-$HCO_3$ types in serpentinite area, Ca-$HCO_3$ type in carbonate area, Na-K and $CO_3+HCO_3$ types in hornfels, respectively. As a result of this study, groundwater in tailing dumps were dissolved $Ca^{2+},\;Mg^{2+}\;and\;SO_4^{2-}$ components with high concentration. Also, these ion components were transported into bedrock aquifer.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.468-472
• /
• 1995

Substantial amount of caryophyllene oxide (CPO) is present in the essential oils of traditionally-used folk medicinal plants and herbal spices. The CPO, produced via chemical and/or enzymatic reaction of caryophyllene (CP), has largely being used as a flavoring component and exhibited a variety of biological activities. Now, we report the antimutagenic activity of CPO determined by Ames's preincubation test. S-9 fraction was prepared from the liver of rats treated with Arochor 1254. Anatoxin $B_1\;(AFB_1)$ and 2-amino-3-methylimidazo[4,5-f]quinoline (IQ) were used as mutagens. Reduction of mutagenicity of $AFB_1$ or IQ for S. typhimurium TA98 and TA100 by CPO was found to be a dose-dependant manner. CPO (500 ${\mu}g/plate$) reduced mutagenicity of AEB1 for S. typhimurium TA98 and TA100 to 89% and 71%, respectively. For IQ, similar results were observed against S. typhimurium TA98 and TA100, resulting in the inhibition percentage of 77% and 51%, respectively. CP also reduced mutagenicity of AEB1 and IQ for S. typhimurium TA98 and TA100, but the reduction rate was somewhat lowered relative to that of CPO. These results indicate that CPO could be developed as a potent antimutagenic flavoring agent.

• Clean Technology
• /
• v.20 no.2
• /
• pp.189-201
• /
• 2014

Partial oxidation, $CO_2$ reforming and the oxidative $CO_2$ reforming of $CH_4$ to produce synthesis gas over supported Ni hydrotalcite-type ($Ni_{0.5}Ca_{2.5}Al$ catalyst) catalysts were carried out and the effects of metal supports (i.e.; Mg and Ca) on the formation of a stable double-layer structure on the catalysts were evaluated. The $CH_4$ reforming stability was determined to be affected by the differences in the interaction strength between the active Ni ions and support metal ions. Only a Ni-Mg-Al composition produced a highly stable hydrotalcite-type double-layered structure; while the Ni-Ca-Al-type composition did not. Such structure provides excellent stability for the catalyst (-80% efficiency) as confirmed by the long-term $CO_2$ reforming test (-100 h), while the Ni-Ca-Al catalyst exhibited deactivation phases starting at the beginning of the reaction. The interaction strength between the active metal (Ni) and the supporting components (Mg and Al) was determined by temperature-programed reduction (TPR) analyses. The affinity was also confirmed by the TPR temperature because the Ni-Mg-Al catalyst required a higher temperature to reduce the Ni relative to the Ni-Ca-Al catalyst. The highest initial activity for synthesis gas production was observed for the $Ni_{0.5}Ca_{2.5}Al$ catalyst; however, this activity decreased quickly due to coke formation. The $Ni_{0.5}Ca_{2.5}Al$ catalyst exhibited a high reactivity and was more stable than the other catalysts because it had a higher resistance to coke formation.