• 복식문화연구
• /
• 제10권4호
• /
• pp.392-403
• /
• 2002

The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to fat body type to improve the aesthetics and wearing satisfaction. For this study, three college students were selected according to the fat body types; According to fat body types, 15 experimental skirt which were different each other in terms of the amount of ease on wait and hip, were made for the appearance test and wearing satisfaction test. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+2cm and W+0cm for fat body type were suggested for the best fit. For the ease on hip, H+2cm and H+0cm for fat body type were suggested for the best fit. 2. The results from wearing satisfaction test were as follows. W+2cm, H+2cm for fat body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows. pattern reduction ratio 0∼2.4% of waist, 1.9∼3.8% of hip for fat body type, were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows. For fat body type, W+2cm, W+0cm for waist and H+2cm, H+0cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for fat body type, and is satisfied with appearance and wearing satisfaction test.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.123-129
• /
• 1987

Corrosion fatigue fracture of dual phase steel(SS41) and raw material steel(SS41) were investigated in 3.5% NaCl aqueous solution at PH 4,6,9 and 11. The fatigue limit of dual phase steel is increased approximately 1.8 times larger than that of raw material in air. The corrosion fatigue life of dual phase steel is about 5-10 times larger than that of raw material in 3.5% NaCl aqueous solution. The reduction of fatigue life is larger for the acidsalt solution than for the alkali salt solution. The reduction of stress level on the reduction ratio of corrosion fatigue life is large as pH 6-11. The reduction ratio of corrosion fatigue life of dual phase steel and raw material is nearly coincided at pH 2. While at pH4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. It has been found that the corrosion resistance effect of dual phase steel is smaller than that of raw material in corrosion fatigue crack propagation rate. As pH below 6 is changed, it can be clearly observed from raw material that the brittle intergranular fracture is characterized, and from the above result, the influence of corrosion of dual phase steel is small.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.28-34
• /
• 2003

This study was performed to compare the effects of chaff and sawdust as bulking materials on temperature, pH, weight and volume reduction and salinity in aerobic composting of food wastes. Volume ratios of food wastes to chaff in reactor of Control, Ch-l, Ch-2, Ch-3 and Ch-4 were 4:0, 4:1, 4:2, 4:3 and 4:4, respectively. Volume ratios of food wastes to sawdust in reactor of Control, Sd-l, Sd-2, Sd-3 and Sd-4 were 4:0, 4:1, 4:2, 4:3 and 4:4, respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours aeration per day. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in the reaction at higher reaction temperature and the elongation of the high temperature reaction period. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in faster pH increase. In the volume ratio of 4:3 and 4:4, pH increased faster in food-chaff mixtures than in food-sawdust mixtures. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in faster steady state in the weight reduction rate and the volume reduction rate. The weight reduction rates of chaff mixtures were higher than those of sawdust mixtures, but the volume reduction rates of sawdust mixtures were more higher than those of chaff mixtures. Salinity increased as composting reaction proceeded, due to reduction in mass weight. The final salinity of Control was 2.79%, and the final range of salinities of chaff and sawdust mixtures were 2.18∼2.37% and 1.86∼2.05%, respectively.

• 한국기후변화학회지
• /
• 제9권4호
• /
• pp.357-368
• /
• 2018

The Paris Agreement, adopted in 2015, requires global mitigation actions by all countries, whether they are developed or developing countries. All member countries prepared and communicated a greenhouse gas reduction target, formally called the Intended Nationally Determined Contribution (INDC). There has been some concern regarding whether the INDCs communicated are sufficient to achieve the emissions reduction needed to hold the increase in global temperature to $2^{\circ}C$ above pre-industrial levels. How to address this emissions gap in an equitable and fair manner remains controversial. Beginning in the year 2023, global stocktaking under the Paris Agreement will be performed by the Conference of the Parties to assess progress towards temperature goals. The present study, based on various composite indicators reflecting equity, fairness, ability and efficiency, analyzed the GHG reduction targets of eleven major countries and the ambitiousness of these targets. Employing share indicators and comparative ratio indicators (resulting in eight composite indicators), this study showed that when share indicators are applied, Korea's appropriate reduction requirement rate is relatively low at 1~2%. However, when comparative ratio indicators are applied, Korea's appropriate reduction requirement rate increases dramatically to 6~11%. In a similar vein, when share indicators are applied, Korea's 2030 target is very ambitious compared to other countries, while the opposite is seen with comparative ratio indicators. This strongly suggests that Korea needs to apply more share indicators than comparative ratio indicators when discussing the equitable and ambitious role of Korea in the climate debate.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.15-21
• /
• 2024

전기차용 리튬이온배터리의 수요가 증가함에 따라 향후 발생할 폐리튬이온배터리 중의 유가금속 회수가 필요하다. 본 연구에서는 리튬이온배터리의 NCM계 양극재를 수소환원과 수침출에 의해 리튬을 수산화리튬으로 회수할 때의 회수율에 미치는 반응온도의 영향을 조사하였다. 반응온도가 상승함에 따라 수소에 의한 NiO, CoO의 환원에 의해 무게 감소율이 반응초기부터 급격하게 증가하였으며 동시에 H₂O 발생량도 증가하였다. 602 ℃ 이상에서는 양극재 중의 Ni, Co가 전부 환원되어 금속상으로 존재하였다. 그리고 수소환원 온도의 상승과 함께 Li 회수률도 증가하였으나 704 ℃ 이상에서는 약 92 % 이상의 유사한 수준을 나타내었다. 따라서 폐Li이온 배터리의 전처리로 수소환원하는 것에 의해 리튬만 사전에 회수하고 잔사를 재처리하면 효율적으로 유가금속을 분리하여 회수할 수 있을 것으로 기대된다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제11권2호
• /
• pp.110-115
• /
• 2008

목 적: 장중첩증의 일차적인 치료로 사용되는 비수술적 관장 정복은 장천공, 쇼크 그리고 복막염 등과 같은 심각한 합병증과 불필요한 스트레스 및 과도한 방사선 노출의 위험이 있다. 본 연구에서는 무리한 비수술적 정복의 시도를 피하기 위하여 장중첩증 환자의 임상 양상 및 검사 소견 중 비수술적 정복 실패를 예측할 수 있는 인자를 파악하고자 하였다. 방 법: 고려대학교 의료원 안산병원에서 1998년 3월에서 2006년 7월까지 장중첩증으로 진단되어 치료받았던 환자 314명 중 비수술적 정복이 시도되었던 300명을 대상으로 하였다. 비수술적 정복의 성공 군과 실패군으로 나누어 성별, 연령, 임상증상 및 이학적 소견 그리고 증상의 시작에서 비수술적 정복술을 시도하기까지의 시간과 비수술적 정복 실패와의 연관성을 분석하였다. 결 과: 비수술적 정복 실패 군의 경우 성공 군에 비해 연령이 어렸고(12.3${\pm}$17.2개월 vs 18.0${\pm}$15.8개월, p=0.03), 정복 시도까지의 시간 경과가 길었으며(33.6${\pm}$29.0시간 vs 21.5${\pm}$20.3시간, p<0.01), 구토, 기면은 많았음(p<0.01)에 비해 복통이나 보챔은 적었다(p<0.01). 이러한 인자들의 다중회귀분석에서 비수술적 정복 실패와 연관된 인자는 6개월 미만 연령(odds ratio: 2.5, 95% confidence interval: 1.2~5.2, p=0.01), 24시간 경과(odds ratio: 2.1, 95% confidence interval: 1.2~4.2, p=0.03), 혈변(odds ratio: 4.8, 95% confidence interval: 1.9~12.2, p<0.01), 기면(odds ratio: 3.4, 95% confidence interval: 1.1~10.4, p=0.04), 복통 또는 보챔(odds ratio: 0.2, 95% confidence interval: 0.1~0.4, p<0.01)이었다. 결 론: 장중첩증에서 6개월 미만 어린 연령, 혈변이나 기면의 소견, 증상 시작 24시간이 경과된 경우 비수술적 정복 실패의 가능성이 많으므로 이러한 사항을 충분히 고려하여 시행 여부를 결정하는 것이 좋겠다.

• 상하수도학회지
• /
• 제37권6호
• /
• pp.311-324
• /
• 2023

As an advanced study on the method of calculating the target revenue water ratio of local waterworks through the leakage component analysis method proposed by Kim et al. (2022), this study developed a model to calculate the achievable revenue water ratio within the specified project cost, the required project cost to achieve the specified target revenue water ratio, and the economically appropriate target revenue water ratio level by considering the leakage reduction cost and leakage reduction benefit for each revenue water ratio improvement strategy, and conducted an applicability evaluation of the developed model using actual field data. The procedure for calculating the target revenue water ratio of local waterworks considering economics proposed in this study consists of three stages: physical data linkage model construction, leakage component analysis, and economic analysis, and the applicability was evaluated for Zone H with branch type and the Zone M network type. As a result of the application, it was calculated that approximately 32.5 billion won would be required to achieve the target revenue water ratio of 70% in the Zone H, and approximately KRW 10.5 billion would be required to achieve the target revenue water ratio of 75% in the Zone M. If the business scale of Zones H and M was corrected to 10,000 m³/day of water usage, the required project cost for a 1% improvement in the revenue water ratio of Zone H was calculated to be 0.7642 billion won and 0.4715 billion won for Zone M.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.71-76
• /
• 2009

In a running blower, there are various exciting forces which can generate noise. The noise of an running industrial fan or blower depends on the structure of a fan, the machining accuracy of each element, and assembled conditions. Many studies have been carried out to reduce the noise of it. In this study, 3-hole buffs are used in pipe of blower to study the influence the number and position of buffs on the noise reduction at inlet and outlet in pipe. Commercial engineering software ANSYS and SYSNOISE were employed to analyze the characteristics and reduction ratio of pressure. It is concluded that optimal position and number of buffs in pipe of blower to show the least reduction ratio of pressure.

• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.445-448
• /
• 2012

We studied the effect of temperature and reaction time by investigating the various temperatures and reaction times in the reduction of molybdenum oxide ($MoO_3$) to molybdenum (Mo) powder in hydrogen gas. We also studied the effect of the reaction of reduction according to the various hydrogen gas flow rates. We surveyed the reduction from molybdenum oxide to molybdenum powder in hydrogen gas and checked two temperature ranges, one from $400^{\circ}C$ to $600^{\circ}C$ and the other from $700^{\circ}C$ to $900^{\circ}C$. We found that the reaction ratio of molybdenum oxide increased with an increasing temperature and also increased with an increasing reaction time, but hydrogen gas did not influence the reduction ratio of molybdenum oxide. We examined molybdenum powders fabricated by ball milling for two hours, using with X-ray diffraction (XRD) and a scanning electron microscopy (SEM).