• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.471-486
• /
• 2001

The principal trends in the course of emission control legislation are reviewed in this paper. In order to keep such a regulation, moreover, an inquiry ito the concrete technical possibility is conducted through review articles, Also, the composition of exhaust gases emitted from a marine diesel engine are investigated as several samples and the measures that can satisfy the value of regulation are handled with laying stress on the control methods discussed to date. It was concluded that various combined systems can be made to reduce NOx emissions without deteriorating substantially navigation costs since many technologies for reducing NOx emissions are being developed. All heat engines suffer from SOx emissions. There are two methods for reducing SOx emissions: desulfurization from exhaust gas and removal of sulfur composition from fuel oil. However it is necessary to watch the development of these technologies to evaluate which method is more favorable. Heat engines have a big problem in the regulation of environmental pollution from exhaust emissions. In the near future, however, diesel engines may be superior to other heat engines, owing to the high thermal efficiency, although the sales of individual models in dises engines may be prosperous and declining.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.107-113
• /
• 2007

This study investigates the filed application in Daebul Free Trade Zone applying both a flowing method using drying shrinkage-reducing superplasticizer(SRS) and an insulating curing method using double layer bubble sheet. Test results showed that fresh concrete satisfied target slump and air content. A structure adding SRS significantly decreased the total bleeding capacity and accelerated the setting time. As for the crack occurrence, the structure applying the flowing method and double bubble sheets simultaneously exhibited the most favorable crack endurance, while conventional concrete showed more than 1mm size of crack in overall. In addition, a structure applying the flowing concrete method partially presented the micro crack. For the area proportion of crack occurrence, the structure using the double bubble sheets indicated 9.8%, while others applying flowing concrete method was 28%, compared with that of conventional one. For the compressive strength of specimens, standard curing specimens indicated $3{\sim}33%$ higher value than that of specimens cured besides the field construction. The specimens containing SRS improved the strength of $2{\sim}6MPa$, which is $10{\sim}22%$ higher than that of conventional concrete.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.237-241
• /
• 2014

The aim of this study is to develop an eco-friendly reduction process of indigo as an alternative choice. Hansenula misumaiensis was used and their reducing activity toward synthetic indigo as well as natural indigo was estimated by dyeing test in terms of indigo dye uptake. The changes in K/S value and pH were monitored on the time-based measurements. Also, reduction duration was evaluated. On the basis of the results described in this study, it was confirmed that Hansenula misumaiensis reduced indigo. Reducing power of Hansenula misumaiensis reached to maximum in two days. It can be possible to develop eco-friendly process of indigo reduction using Hansenula misumaiensis by the optimization of strain culture conditions and the optimization of reduction conditions.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1309-1315
• /
• 2004

The harmonic current originated from electric cars will be cause of electromagnetic interference along adjacent communication cables and troubles with signaling. It will also cause overheating in power capacitor and malfuction in protection relay. Therefore, it brought actual measurement of harmonic current by each operation mode. Because the result exceeded the value prescribed by Korea Electric Power Corporation, we constructed facilities reducing harmonic current on overloaded part at each power supply station located in conventional line (Guro, Kyungsan, and Milyang) as an optimal alternative. Then, this study compared and analyzed the reducing effect before and after constructing facility.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.5
• /
• pp.355-363
• /
• 2010

High purity hydrogen, 97-99 vol.%, with CO at just ppm levels was obtained in a fixed bed of iron oxide employing the steam-iron cycle operation with reduction at 823K and oxidation in a steam-$N_2$ mixture at 773K TGA experiments indicated that temperature of the reduction step as well as its duration are important for preventing carbon build-up in iron and the intrusion of $CO_2$ into the hydrogen product. At a reduction temperature of 823K, oxide reduction by $H_2$ was considerably faster than reduction by CO. If the length of the reduction step exceeds optimal value, low levels of methane gas appeared in the off-gas. Furthermore, with longer durations of the reduction step and CO levels in the reducing gas greater than 10 vol.%, carbidization of the iron and/or carbon deposition in the bed exhibited the increasing pressure drop over the bed, eventually rendering the reactor inoperable. Reduction using a reducing gas containing 10 vol.% CO and a optimal reduction duration gave constant $H_2$ flow rates and off-gas composition over 10 redox reaction cycles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.41-47
• /
• 1998

The (Sr$_1$-\ulcorner.Ca\ulcorner)TiO$_3$(0.05 x 0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[$^{\circ}C$] in a reducing atmosphere($N_2$gas). After being fired in a reducing atmosphere, metal oxides(CuO) was painted on the both surface of the specimens to diffuse to the grain boundary. The capacitance changes slowly and almost linearly in the temperature region of -40~+85[$^{\circ}C$]. The capacitance characteristics appears a stable value within $\pm$10[%]. According to increase of the frequency as a functional of temperature, all specimens used in this study showed the dielectric relaxation, and the relaxation frequency was above 10\ulcorner[Hz]. The capacitance is almost unchanged below about 20[V] but it decrease slowly over 20[V]. The voltage-current characteristics of specimens observed in the temperature range of 25~125[$^{\circ}C$] as the current increased appears that it is due to space charge condensed to interface between grain and grain boundary.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.759-766
• /
• 2018

Although the Act on the Prevention of Light Pollution Due to Artificial Lighting has been enforced since 2013, the area of advertisement lighting has made slow progress in solving the problems of light pollution. This paper first investigated institutional problems by analyzing domestic laws and regulations relating to the light pollution of advertisement lighting, and investigated and analyzed methods for reducing light pollution that were applied in overseas countries. Then, problems of light pollution were analyzed by conducting a research on the actual status of advertisement lightings installed in South Korea and applying various methods for reducing light pollution, and advertisement lighting using LED was recommended. As a method for reducing light pollution that can be applied to the process of manufacturing channel letter-type advertisement lights, power consumption per unit area ($W/m^2$) was proposed, and $100W/m^2$ was recommended as a value currently suitable for South Korea.

• Corrosion Science and Technology
• /
• v.21 no.2
• /
• pp.89-99
• /
• 2022

A versatile method for performing non-cyanide electroless gold plating using thiomalic acid (TMA) as a complexing agent and 2-aminoethanethiol (AET) as a reducing agent was investigated. It was found that TMA was an excellent complexing agent for gold. It can be used in electroless gold plating baths at a neutral pH with a high solution stability, makes it a potential candidate to replace conventional toxic cyanide complex. It was found that one gold atomic ion could bind to two TMA molecules to form the [2TMA-Au⁺] complex in a solution. AET can be used as a reducing agent in electroless gold plating solutions. The highest current density was obtained at electrode rotation rate of 250 to 500 rpm based on anodic and cathodic polarization curves with the mixed potential theory. Increasing AET concentration, pH, and temperature significantly increased the anodic polarization current density and shifted the plating potential toward a more negative value. The optimal gold ion concentration to obtain the highest current density was 0.01 M. The cathodic current was higher at a lower pH and a higher temperature. The current density was inversely proportional to TMA concentration.

• Earthquakes and Structures
• /
• v.25 no.6
• /
• pp.455-467
• /
• 2023

This study focuses on demonstrating the effectiveness of vibration control of tuned rotary mass damper (TRMD) for reducing the bidirectional and torsional response of the irregular asymmetric structure with voided slabs under earthquake excitations. The TRMD arranged in plane of one-story eccentric structure is proposed as a distributed tuned rotary mass damper (DTRMD) system. Lagrange's equation is used to derive the equations of motion of the controlled system. The optimum position and number of TRMD are numerically investigated under harmonic excitation and the control effects of different distributions are discussed. Furthermore, a shaking table test is conducted under different excitation cases, including free vibration, forced vibration and seismic wave to investigate the absorption performance of the device. The numerical simulations of different distributions of the TRMDs show that the DTRMDs are more effective in reduction of the displacement response of the asymmetric structure under the same mass ratio, even when the degree of eccentricity becomes large. However, with small degree of eccentricity, the unreasonable asymmetrical arrangement may cause the increase of the peak value of the rotational angular displacement. Finally, the experimental investigations exhibit similar results of translational displacement of the structure. It is concluded that the vibration of the irregular asymmetric structure can be controlled more economically and effectively by reducing the mass ratio through reducing the quantity of TRMDs at the high stiffness end.

• Korean journal of food and cookery science
• /
• v.32 no.5
• /
• pp.575-584
• /
• 2016

Purpose: Nurungji is a traditional Korean food made by yellowish scorched rice. After getting gelatinization of rice, a thin crust of scorched rice will usually be left in the bottom of the traditional cooking pot. In this study, physicochemical characteristics and antioxidant properties of five commercial nurungji products (CNP1, CNP2, CNP3, CNP4, and CNP5) were evaluated. Methods: Physicochemical properties of the five commercial nurungji products were evaluated with AOAC method. The antioxidant activities were assessed using the 1,1-diphenyl-2-picryl hydrazyl (DPPH), 2,2-azinobis-(3-ethyl-benozothia zoline-6-sulfonic acid)(ABTS), ferric reducing antioxidant power (FRAP), and reducing power assays. Results: Water content was the highest in CNP3, followed by CNP1, CNP2, CNP5, and CNP4. Crude ash content of all nurungji was less than 1%. In Hunter color parameter, the significantly highest a value (redness) and b value (yellowness) were measured in the CNP4 product, meanwhile the lowest in CNP3 (p<0.05). The nurungji products of CNP4 and CNP5 had the significantly higher content in total polyphenols and total flavonoids, compared to those of other products. CNP3 and CNP2 had the lowest in total polyphenols and total flavonoids, respectively. CNP4 and CNP5 products showed the significantly higher values in antioxidant activities, whereas CNP3 had the lowest activity. Conclusion: The high value of antioxidant activities in CNP4 and CNP5 might have been affected primarily by the total polyphenols with increasing browning color during the heat treatment.