• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.291.1-291.1
• /
• 2016

Graphene by one of the two-dimensional (2D) materials has been focused on electronic applications due to its ultrahigh carrier mobility, outstanding thermal conductivity and superior optical properties. Although graphene has many remarkable properties, graphene devices have low on/off current ratio due to its zero bandgap. Despite considerable efforts to open its bandgap, it's hard to obtain appropriate improvements. To solve this problem, heterojunction barristor was proposed based on graphene. Mostly, this heterojunction barristor is made by transition metal dichalcogenides (TMDs), such as molybdenum disulfide ($MoS_2$) and tungsten diselenide ($WSe_2$), which have extremely thickness scalability of TMDs. The heterojunction barristor has the advantage of controlling graphene's Fermi level by applying gate bias, resulting in barrier height modulation between graphene interface and semiconductor. However, charged impurities between graphene and $SiO_2$ cause unexpected p-type doping of graphene. The graphene's Fermi level modulation is expected to be reduced due to this p-doping effect. Charged impurities make carrier mobility in graphene reduced and modulation of graphene's Fermi level limited. In this paper, we investigated theoretically and experimentally a relevance between graphene's Fermi level and p-type doping. Theoretically, when Fermi level is placed at the Dirac point, larger graphene's Fermi level modulation was calculated between -20 V and +20 V of $V_{GS}$. On the contrary, graphene's Fermi level modulation was 0.11 eV when Fermi level is far away from the Dirac point in the same range. Then, we produced two types heterojunction barristors which made by p-type doped graphene and graphene treated 2.4% APTES, respectively. On/off current ratio (32-fold) of graphene treated 2.4% APTES was improved in comparison with p-type doped graphene.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.832-835
• /
• 2001

We report the structural and electrical properties of hafnium oxide (HfO$_2$) films with tungsten silicide (WSi$_2$) metal gate. In this study, HfO$_2$thin films were fabricated by oxidation of sputtered Hf metal films on Si, and WSi$_2$was deposited directly on HfO$_2$by LPCVD. The hysteresis windows in C-V curves of the WSi$_2$HfO$_2$/Si MOS capacitors were negligible (<20 mV), and had no dependence on frequency from 10 kHz to 1 MHz and bias ramp rate from 10 mV to 1 V. In addition, leakage current was very low in the range of 10$^{-9}$ ~10$^{-10}$ A to ~ 1 V, which was due to the formation of interfacial hafnium silicate layer between HfO$_2$and Si. After PMA (post metallization annealing) of the WSi$_2$/HfO$_2$/Si MOS capacitors at 500 $^{\circ}C$ EOT (equivalent oxide thickness) was reduced from 26 to 22 $\AA$ and the leakage current was reduced by approximately one order as compared to that measured before annealing. These results indicate that the effect of fluorine diffusion is negligible and annealing minimizes the etching damage.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권3호
• /
• pp.897-902
• /
• 2015

PTEN (phosphatase and tensin homologue), as a tumor suppressor gene, plays a significant role in regulating cell growth, proliferation, and apoptosis. Results from published studies for association between the PTEN IVS4 I/D (rs3830675) polymorphism and cancer risk are inconsistent and inconclusive. We therefore conducted a meta-analysis to evaluate the potential association between PTEN IVS4 I/D polymorphism and risk of cancer in detail. We searched PubMed (Medline) and EMBASE web databases to cover all relevant studies published until December 2013. The meta-analysis was carried out and pooled odds ratios (ORs) and 95% confidence intervals (95%CIs) were used to appraise the strength of association. A total of 1,993 confirmed cancer cases and 3,200 controls were included from six eligible case-control studies. Results from overall pooled analysis suggested a significant effect of the PTEN IVS4 I/D polymorphism and cancer risk in all genetic models, i.e., allele (I vs D: OR=0.743, 95%CI=0.648 to 0.852, p=0.001), homozygous (II vs DD: OR=0.673, 95%CI=0.555 to 0.816, p=0.001), heterozygous (ID vs DD: OR=0.641, 95%CI=0.489 to 0.840, p=0.001), dominant (II+ID vs DD: OR=0.626, 95%CI=0.489 to 0.802, p=0.001) and recessive (II vs DD+ID: OR=0.749, 95%CI=0.631 to 0.889, p=0.001). Significant publication bias was detected during the analysis. The present meta-analysis suggests that the PTEN IVS4 I/D polymorphism is significantly associated with reduced risk of cancer. However, future larger studies with other groups of populations are warranted to clarify this association.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.55-55
• /
• 2018

Recently, amorphous oxides such as InGaZnO (IGZO) and InZnO (IZO) as a channel layer of an oxide TFT have been attracted by advantages such as high mobility, good uniformity, and high transparency. In order to apply such an amorphous oxide TFTs to a display, the stability in various environments must be ensured. In the InGaZnO which has been studied in the past, Ga elements act as a suppressor of oxygen vacancy and result in a decreased mobility at the same time. Previous studies have been showed that the InZnO, which does not contain Ga, can achieve high mobility, but has relatively poor stability under various instability environments. In this study, the TFTs using $IZO/Al_2O_3$ double layer structure were studied. The introduction of an $Al_2O_3$ interlayer between source/drain and channel causes superior electrical characteristics and electrical stability as well as reduced contact resistance with optimally perfect ohmic contact. For the IZO and $Al_2O_3$ bilayer structures, the IZO 30nm IZO channels were prepared at $Ar:O_2=30:1$ by sputtering and the $Al_2O_3$ interlayer were depostied with various thickness by ALD at $150^{\circ}C$. The optimal sample exhibits considerably good TFT performance with $V_{th}$ of -3.3V and field effect mobility of $19.25cm^2/Vs$, and reduced $V_{th}$ shift under positive bias stress stability, compared to conventional IZO TFT. The enhanced TFT performances are closely related to the nice ohmic contact properties coming from the defect passivation of the IZO surface inducing charge traps, and we will provide the detail mechanism and model via electrical analysis and transmission line method.

• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.205-214
• /
• 2018

This paper deals with the experimental study on the hygrothermal ageing effect to the strength of Carbon Fiber Reinforced Plastics (CFRP) materials for marine leisure boat manufactured by vacuum assisted resin infusion method. The experiments performed consist of tensile, flexural and shear tests according to American Society for Testing and Materials (ASTM) and Korean Industrial Standards (KS) test methods. Test coupons are varied from uni-directional(UD, $0^{\circ}$, $90^{\circ}$), Bi-Directional (BD), and Double-Bias (DB) carbon fiber fabrics in conjunction with epoxy resin. The results of tensile test show that tensile strength reduces significantly while not the same degree of reduction is observed for elasticity modulus with respect to the existence of hygrothermal ageing effect. This implies that the tensile strain induced from external load holds steady values but ultimate strength values change widely under hygrothermal ageing effect. In case of the flexural test, $0^{\circ}$ UD shows more strength reduction than $90^{\circ}$ UD while BD has reduced values in both flexural strength and elasticity modulus under hygrothermal ageing effect. It is learned that the bending strain induced from external load and ultimate strength values are reduced with respect to hygrothermal ageing effect. Shear test performed only on DB materials, and the results show marginal reduction in ultimate strength and moderate reduction in elasticity modulus. This means that the shear strain varies more than ultimate shear strength with respect to hygrothermal ageing effect. The experiment conducted in this paper clearly demonstrates the differences in material properties of the CFRP for the consideration of hygrothermal ageing effect. Findings obtained from this experimental study can serve as a fundamental input data for the realistic structural responses of marine leisure boat built in CFRP materials.

• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.26.1-26.18
• /
• 2020

Objectives: This study aimed to systematically review the pain and flare-up effects of calcium hydroxide (CH) as intracanal medication (ICM) in non-vital mature teeth. Materials and Methods: Electronic-databases searching for published and grey literature and manual searching were conducted. Only randomized clinical trials (RCTs) were included comparing CH to other ICMs in non-vital mature teeth. The risk of bias was assessed using the RoB 2.0 Cochrane tool. The main outcomes were pain and flare-up. Qualitative and quantitative analysis, wherever applicable, was performed. The certainty of evidence (CoE) was assessed using Grading of Recommendations Assessment, Development and Evaluation (GRADE). Results: Sixteen articles were included in 6 comparisons at different time points for different outcomes. CH reduced pain risk than no ICM within the 1-14-days interval (p < 0.05) and than triple-antibiotic paste within the first day (p < 0.05) and was similar to corticosteroid/antibiotics combination (p > 0.05). Chlorhexidine (CHX) or CH/CHX, however, reduced pain levels than CH alone (p < 0.05). CH showed higher flare-up risk than CHX (p < 0.05). CoE, however, ranged from very low to moderate. Conclusion: Most comparisons for different outcomes are based on very few studies, mostly low-powered, with an overall low CoE. Thus, the available evidence is considered insufficient to either support or refute CH effectiveness or to recommend one ICM over another. Therefore, further well-designed, larger RCTs are required.

• Journal of Astronomy and Space Sciences
• /
• 제11권2호
• /
• pp.281-295
• /
• 1994

본 논문에서는 운동량 바이어스 안정화된 인공위성의 능동 미동 제동율 위한 자동 제어기의 설계에 새로운 연속의 스위칭 방정식율 도입한 가변구조 시스댐 이론을 사용하였다. 일반적으로 미동 제동을 갖고 있는 션형화된 다변수 시스템에 가변구조 이론을 적용할 때, 스위칭 이득을 어떻게 결정해야 하는지, 진동 현상과 입력과 상태 궤적에 도달기간을 어떻게 줄여야 하는지 등의 단점을 갖고 있다. 이러한 문제를 해결하기 위해서 본 논문에셔는 슬라이딩 모드를 얻기 위한 불연속의 스위칭 로직 대신에 연속의 스위칭 방정식을 제시하였다. 이 새로운 접근방법은 기존의 가변구조 이론에 의한 방법보다 훨씬 간단하고, 구해진 제어입력이 연속이므로 진동현상이 없으며, 동시에 설계인자를 적절하게 선정하므로써 도달기간을 줄일 수 있게 된다.

• 한국통신학회논문지
• /
• 제22권11호
• /
• pp.2439-2450
• /
• 1997

디지털 자기 기록 채널의 기록 밀도가 증가하면 기록 채널의 비선형 왜곡이 발생하고, 이로 인해 PRML이나 DFE와 같은 디지털 검출 방식의 성능이 급격히 저하된다. 고밀도 기록을 저해하는 요소는 비선형 천이 이동과 부분 삭제로 분류되는데, 이 중 비선형 천이 이동은 사전 보상 기법에 의해 보상 가능하고, 부분 삭제 현상의 보상을 위해서는 정교한 비선형 동화 기법이 필요하다. 고밀도 기록을 달성하기 위해서는 이러한 비선형 왜곡과 관련된 파라메타의 정확한 추정이 매우 중요하다. 본 논문에서는 시간 영역에서 제안된 적응 알고리듬을 사용하여 위의 두 비선형 왜곡 영향을 분리할 수 있는 새로운 추정 기법을 논하고, 제안된 적응 방식으로 비선형 파라메타를 바이어스 없이 추정할 수 있음을 컴퓨터의 실험을 통해 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1199-1205
• /
• 1993

It has been well known that the assumption of full state availability is one of the most important restrictions to the practical realization of VSCS. And several attempts to alleviate the assumption had been made. However, it is not easy to find a positive scheme among them. Recently, an output feedback variable structure control system(OFVSCS) was proposed and the effectiveness of the scheme was validated for the disturbance free systems. The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external distrubances by extending the basic OFVSCS and to evaluate its control performances through power system stabilizer design example. The ROFVSCS is composed of dynamic switching function and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme, existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured informations, the practical application of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that the implementation cost of VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need measure the states with high measurement cost.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.174-185
• /
• 2006

This paper describes a DR construction for land navigation and the sigma point based receding horizon Kalman FIR (SPRHKF) filter for DR/GPS hybrid navigation system. A simple DR construction is adopted to improve the performance both of the pure DR navigation and the DR/GSP hybrid navigation system. In order to overcome the flaws of the EKF, the SPKF is merged with the receding horizon strategy. This filter has several advantages over the EKF, the SPKF, and the RHKF filter. The advantages include the robustness to the system model uncertainty, the initial estimation error, temporary unknown bias, and etc. The computational burden is reduced. Especially, the proposed filter works well even in the case of exiting the unmodeled random walk of the inertial sensors, which can be occurred in the MEMS inertial sensors by temperature variation. Therefore, the SPRHKF filter can provide the navigation information with good quality in the DR/GPS hybrid navigation system for land navigation seamlessly.