• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.433-440
• /
• 2021

The problem of maritime accidents due to the carelessness of fishing vessels, which is affected by the aging of fishing vessel operators. And there is navigation, communication and fish finder that is installed inside the narrow bridge of a fishing vessel. Therefore these system are monitors as many as of each terminal, which is bad influence on obscuring view of front sea from a fishing vessel bridge. In addition a large problem, it is occurs to reduce of the information recognition ability due to the confusion, which is can not check the display information each of screen equipments. Therefore, there has been demand to simply integrated the equipment, and it has wanted the integrated support system of these equipment. The display must be provided on a fishing vessels such as electronic charts, communications equipments and fish detection into one case. In this paper, the integrated system will be installed the GPS plotter, AIS, VHF-DSC, V-pass, fish finder and power supply in the narrow wheelhouse on a fishing vessel, which is configured in one case and operated by multi function display (MFD). The MFD is integrated to simplify for several multi terminals and provided necessary information on a single screen. This integration fishery support system will has improved in sea safety operation and fishery environment of fishing vessels by this implementation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.339-344
• /
• 2000

Utilization of animal excreta in aquaculture can have potentials of high fish production and low maintenance costs for fish farming and it can reduce water pollution caused by animal waste disposal. Integration of wastewater treatment pond system with aquaculture has been utilized in many countries. Ecologically balanced pond ecosystem is formed through the stabilization of wastes, the growth of aquatic plants, and the cultivation of fish. The most appropriate fish for rearing in these ponds are those which can feed directly on phytoplankton, especially algae. Carp were introduced into a tertiary pond - water depth of 2.2 m, water surface area of $130\;m^2$, volume of $148\;m^3$ - of a pond system treating milk cow excreta. The carp production was $125g{\cdot}m^{-2}year^{-1}$ which falls into upper range of $18\;-\;137g{\cdot}m^{-2}year^{-1}$ of treated sewage-fed carp farming of other countries. Average $BOD_5$ and T-N of the pond was 19.8 and $21.0\;mg{\cdot}L^{-1}$ respectively, and the ecological environment of it was suitable for growth of carp. Several carp of 100g were introduced in August into a secondary pond of the treatment system, whose average $BOD_5$ and T-N was 27.9 and $30.8\;mg{\cdot}L^{-1}$ respectively. They were died within one week, which may be attributed to the depletion of dissolved oxygen at dawn. Effluents from primary treatment can be used in fish pond with dilution and those from secondary treatment can be directly funnelled into it. Waste stabilization pond treating animal excreta can be utilized for fish rearing when its water quality maintains secondary treatment level.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.209-217
• /
• 2015

Development of food industry and increased city life induced enlarged generation of food waste which is currently reused in a wide range of way. In this study, treatment of food waste generated from the public agricultural product wholesale markets (they are categorized as business places which imposes the duty for reducing the food waste discarded) in Korea was investigated, and subsequently, a scheme for improving the food waste recycling business was suggested. The food waste treatment plants are mainly located in Kyeongki-do at 39.5% of total plants in Korea and the other provinces have less than 10% of the total numbers, among which public treatment plant was 38.0% and private plant was 62.0%. The treatment methods included recycling as animal feed at 47.5%, as compost at 36.4%, and the rest of food waste (12.6%) was treated in other ways. Remarkably, it was noticed that the amount of food waste treated in anaerobic digestion have been increased up to 5.4% since 2011. This implied that food waste treated in anaerobic digestion method is gradually increased according to government policy. Amongst 33 public agricultural product wholesale markets distributed all over the country, the trading volume dealt in Garakdong market in Seoul, Gangseo market in Seoul, Daegu market in Daeju, Eomgung market in Busan, Guri market in Guri accounted for 34.67, 7.47, 6.98, 5.41, and 5.30% of the total trading volume in Korea, respectively. 2.65% of the total trading agricultural products dealt in the markets were remained as food waste and treated. In 2006, Ministry of Agriculture, Food and Rural Affairs implemented the package policy for radish and Chinese cabbage in order to reduce the amount of food waste and indeed, food waste generated in Garakdong market declined to one third of the food waste before the package policy implementation. In 2010, the food waste amount treated by 'dehydration', 'discarding as raw materials', and 'drying after dehydration' accounted for 56.3%, 33.7%, and 10.0% of the total food waste generated in the public agricultural product wholesale market. However, in 2013, discarding as raw materials accounted for the most at 56.3% followed by dehydration at 37.5%, and by drying after dehydration at 6.3%. The remarkable increment of the food waste discarded as raw materials was attributed to the increase of them in Garakdong market in Seoul. In general, the agricultural food waste contains high amount of moisture at 88% in average and low amount of salt at 0.02% in average. Therefore, it is highly recommended to treat the agricultural food waste through drying after dehydration in order for improving the treatment capability. Also, this recommendation can be supported by the fact that the end-products via drying after dehydration can be utilized as compost material. Overall, the agricultural food waste recycling business can be developed through integration of the treatment via 'drying after dehydration' and compost production.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.55-92
• /
• 2010

In terms of labor market accomplishments, such as income, size of the company, and the matching quality between one's job and college major (specialization), a very large discrepancy is observed between the graduates from colleges located in Seoul and those outside Seoul. But, when the department average score of the Scholastic Aptitude Test (SAT) at the time of college entrance is controlled for, the discrepancy is found to be reduced to a considerable degree. In the case of wage gap, at least two third can be explained by the SAT score gap. The remaining wage gap seems to reflect the characteristics of workplace. In other words, graduates with high SAT scores enter colleges located in Seoul and thus tend to find better jobs leading to earning differences. This result that confirms the importance of aptitude test scores suggests that in the labor market, one of the major reasons behind a lower accomplishment of the graduate from local colleges is due to a lower competitiveness of local colleges in attracting the brightest students. But, this should not be viewed as only an internal problem of local colleges. This is because the growth of local economies tends to haul the advancement of local colleges in that area rather than being the other way around. The agglomeration effect in Seoul where headquarters of large corporations and financial institutions gather is the factor that has elevated the status of colleges located in Seoul since this provides highly preferred job choices of graduates. When the competitiveness of college is significantly influenced by exogenous factors, such as the vicinity to Seoul, the effort being made by colleges alone would not be enough to improve the situation. However, the central government, too, is not in the position to carry out countermeasure policies for such problems. The regional development strategy boosted through supportive policies for local colleges, such as financial support, is not based on the persuasive and empirical grounds. It is true that college education is universal and that the government''s intervention in assisting local colleges to secure basic conditions, such as tenure faculty and adequate facilities is necessary. However, the way of intervention should not be a support-only type. In order to improve the efficiency and effect of financial support, restructuring programs, including the merger and integration of insolvent colleges, should be underway prior to providing support. In addition, when the policy is focused on education recipients-local college students, and not on education providers-local colleges, the importance of regional gap in compulsory education (elementary and junior high schools) turns out to be much important as the gap between metropolitan area colleges and local colleges. Considering the educational gap before college entrance shown from the discrepancies of aptitude test scores among different regions, the imbalance between regions in terms of human resources is apparently derived from compulsory education, and not from college education. Therefore, there is a need to double the policy efforts to reduce the educational gap among different regions. In addition, given the current situation where it is difficult to find appropriate ex post facto policy measures to solve the problem of income gap between the graduates from metropolitan colleges and local colleges, it can be said that improving the environment for compulsory education in local areas is a growing necessity for bridging the educational gap among different regions.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.29-54
• /
• 1992

Recent studies on the economic effects of trade liberalization and economic integration have emphasized the significant gains associated with product differentiation and scale economies. Securing access to markets in other countries will make it possible to increase product variety and capture scale economies, thus, expanding the gains from trade. Liberalization is also expected to introduce foreign competition into the previously closed market. Concurrently, the liberalization will improve the competitive market environment for firms selling in the domestic market. Firms will be pressed to either exit or reduce cost. The output per firm, then, will increase due to the exit of rival firms, and the average total cost will decline due to the economies of scale. 'Rationalization' of the production process will eventually follow. This paper addresses the economic effects of (counterfactual) bilateral tariff elimination between Korea and Japan. It computationally assesses the gains from liberalization as well as the resource allocations and welfare effects associated with the tariff reduction. The endogenous determination of the key parameters distinguishes this paper from others. The firm's perceived elasticity of demand and elasticity of substitution in the present model are calibrated to be consistent with the base year data. Korea, Japan, and the rest of the world are modeled explicitly. The sectoral coverage of the model includes twenty-three tradable product categories based on three-digit SITC industries and seven nontradable categories based on one-digit SITC industries. Product categories are also classified into perfectly competitive and imperfectly competitive ones. In the imperfectly competitive industries, product differentiation exists at the firm level, while the perfectly competitive industries are characterized by national product differentiation. The simulation results of bilateral tariff reduction are reported. Tariff elimination tends to increase intra-industry trade flows so that the total amount of exports and imports of both countries expand. Yet, Japan is expected to increase the bilateral trade surplus in the wake of the mutual tariff reduction. Terms-of-trade for Korea will not change, while for Japan it will deteriorate. Equivalent variations reflecting the change in consumer surplus (welfare) will favor Korean consumers. Total output, however, will not change substantially, recording 0.5 and 0.6% for Japan and Korea, respectively. An interesting finding in the analysis is that the gains from increased competition and scale efficiency are not as prevailing as expected in theory.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.101-114
• /
• 2001

Transportation enterprises should maintain constant and qualitative operation. Thus, in short period, transportation enterprises don't change supply in accordance with demand. In the result, transportation enterprises don't reduce operation in spite of management deficit at will. In freight transportation type, less-than-truckload(LTL) has more relation with above transportation feature than truckload(TL) does. Because freight transportation supply of TL is more flexible than that of LTL in correspondence of freight transportation demand. Relating to above mention, it appears that shortage of road and freight terminal of LTL is larger than that of TL. Especially in road and freight terminal comparison, shortage of freight terminal is larger than that of road. Shortage of road is the largest in 1990, and improved after-ward. But shortage of freight terminal is serious lately. So freight terminal needs more expansion than road, and shows better investment condition than road. Freight terminal expansion brings road expansion in LTL, on the contrary, freight terminal expansion substitutes freight terminal for road in TL. In transportation revenue, freight terminal's contribution to LTL is larger than that to TL. However, when we adjust quasi-fixed factor - road and freight terminal - to optimal level in the long run, in TL, diseconomies of scale becomes large, but in LTL, economies of scale becomes large. Consequently, it is necessary for TL to make counterplans to activate management of small size enterprises and owner drivers. And LTL should make use of economies of scale by solving the problem, such as nonprofit route, excess of rental freight handling of office, insufficiency of freight terminal, shortage of driver, and unpreparedness of freight insurance.

• Journal of Legislation Research
• /
• no.44
• /
• pp.241-281
• /
• 2013

First and foremost, a discussion concerning government structure has to be done in connection with the state form and the governmental form. For practical reasons, there is a need to balance the principle of legality and its exceptions under the Government Organization Act. To ensure the flexibility of government structure with respect to the principle of legality, the National Assembly should accept the government structure requested by the newly elected government. This mitigates the rigidity of the principle of the legality within the government organizations. However, excessive changes by each government could violate the principle of legality asked by Constitution. In this sense, arbitrary modification with respect to the government structure by the newly elected government is not desirable. The long term stability of the government organization is required in any case. Secondly, general administrative agencies, other than Executive Ministries, should not be established under the direct order of the President without the control of the Prime Minister. A hierarchy of the executive branch (President->Prime Minister-> Executive Ministries) is stipulated in the Constitution. Establishing a hierarchy of President -> executive institution should be considered unconstitutional. Therefore, only the Presidential Secretariat and institutions with special functions can be established in the Presidential Office. Establishing general administrative agencies in the Presidential Office for convenience purposes is against the spirit of the current Constitution. Consequently, only the office of staffs and special agencies can be placed in the presidential office. It is against the spirit of the current Constitution to found administrative agencies under the presidential office for convenience. Thirdly, the office of the Prime Minister should be the backbone of internal affairs. In that sense, the President, as the head of state, should focus on the big picture such as the direction of the State, while the Cabinet headed by the Prime Minister should be responsible for the daily affairs of the State. The cabinet surrounding the Prime Minister must control all the ordinary affairs of the State, while the President, as the head of the State, should focus on the big picture of blueprinting the aim of the State. Lastly, the Office of the Prime Minister and Executive Ministries are the two main bodies of the executive branch. It is important to reduce the confusion caused by repeated changes in the names of Executive Ministries, to restore the traditional names and authorities of these institutions, and to rehabilitate the legitimacy of the State. For the Korean democracy to take its roots, a systematic way of stabilizing a law-governed democratic country is needed. There is also the need not only to reform security and economic agencies, but also to rationally solve the integration of technique and policy, according to the changes of time.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.