• International Journal of Concrete Structures and Materials
• /
• 제10권sup3호
• /
• pp.65-74
• /
• 2016

During concrete pumping, the migration and redistribution of particles occur in a pipe and the lubrication layer that forms between the bulk concrete and the pipe wall is the governing factor determining the flow behavior. In order to identify flow behavior of pumping, in this study, the viscoelastic properties related to the microstructural behavior of a flocculated suspension were examined by using dynamic oscillatory measurements. Cement paste is assumed to be a constituent material of the lubrication layer and ten cases of mixing design are employed by changing the proportions of mineral admixtures. The relationship between the yield stress obtained from the steady shear test and the dynamic modulus resulted from the oscillatory shear measurement was derived and the implications of the correlation are discussed. Moreover, based on the investigation of the viscoelastic properties with oscillatory measurements, the initial behavior of pumped concrete was analyzed systematically.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.191-201
• /
• 1997

Non-passivated electrolytic tinplates withour conventinal chemical treatment self-oxidize in ambient atmosphere to from yellow stain on the outermost surface during the long-term storage. The degree of yellowness of the stain increased linerly with the oxide thickness due to the interfeefence color of the $SnO_2$ Even though the thickness of the oxide layer was very thin, less than 100$\AA$ , it exerts an undesirable influence on the can-making processes, particularly the stripping behavior after ironing. Investigations were carried out on the morphologies of the coating layer, the changes in oxide thickness during successive can-making processes and the averge friction coefficients with the different oxide thinkness. These oxide layers were broken up and distributed within the bulk tin coating during the ironing process. This redistribution of the oxide layer prvented smooth pressing-aside of the tin coating layer, resulting in an increase in the ironing friction coefficient. As the friction was increased, the residual stress along the can wall thinkness(i.e., the hoop stress) was also increased. Due to both the oxibe layer accumulation, which increased the friction coefficient, and the hoop stress, can stripping efficiency without roll-back is reduced.

• 전자공학회논문지
• /
• 제54권6호
• /
• pp.25-29
• /
• 2017

본 논문에서는 듀로이드와 FR4를 기판으로 하는 재배선층 위에 정전 구동 방식의 RF MEMS 스위치와 승압 DC-DC 컨버터를 결합하는 연구를 진행하였다. 상용 PCB(Printed Circuit Board) 공정으로 듀로이드와 GCPW 전송 선로 조합의 재배선층과 FR4와 CPW 전송 선로 조합의 재배선층을 제작하였다. 상용 PCB 공정 특성에 의하여 전송 선로의 특성 임피던스는 56옴, 59옴 이었으며 이에 대하여 비교 분석하였다. 듀로이드 기판은 유전상수가 작고 두께가 얇으며 GCPW를 적용하였기 때문에 상대적으로 유전상수가 크고 두께가 두꺼우며 CPW 전송 선로를 적용한 FR4 기판보다 6GHz 대역에서 삽입 손실은 약 2.08dB, 반사 손실은 약 3.91dB, 신호 분리도는 약 3.33dB 우수한 것을 확인하였다.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.355-367
• /
• 2021

This paper investigates the mechanical response of simply supported one-way reinforced concrete slabs under fire through numerical analysis. The numerical model is constructed using the software ABAQUS, and verified by experimental results. Generally, mechanical response of the slab can be divided into four stages, accompanied with drastic stress redistribution. In the first stage, the bottom of the slab is under tension and the top is under compression. In the second stage, stress at bottom of the slab becomes compression due to thermal expansion, with the tension zone at the mid-span section moving up along the thickness of the slab. In the third stage, compression stress at bottom of the slab starts to decrease with the deflection of the slab increasing significantly. In the fourth stage, the bottom of the slab is under tension again, eventually leading to cracking of the slab. Parametric studies were further performed to investigate the effects of load ratio, thickness of protective layer, width-span ratio and slab thickness on the performance of the slab. Results show that increasing the thickness of the slab or reducing the load ratio can significantly postpone the time that deflection of the slab reaches span/20 under fire. It is also worth noting that slabs with the span ratio of 1:1 reached a deflection of span/20 22 min less than those of 1:3. The thickness of protective layer has little effect on performance of the slab until it reaches a deflection of span/20, but its effect becomes obvious in the late stages of fire.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.57-68
• /
• 2022

A simulation study of the distribution of magnetic flux induced by a U-shaped electromagnet into a two-layer massive object with variations in the depth and properties of the surface layer has been carried out. It has been established that the hardened surface layer "pushes" the magnetic flux into the bulk of the magnetized object and the magnetic flux penetration depth monotonically increases with increasing thickness of the hardened layer. A change in the thickness and magnetic properties of the surface layer leads to a redistribution of magnetic fluxes passing between the poles of the electromagnet along with the layer and the bulk of the steel object. In this case, the change in the layer thickness significantly affects the magnitude of the tangential component of the field on the surface of the object in the interpolar space, and the change in the properties of the layer affects the magnitude of the magnetic flux in the magnetic "transducer-object" circuit. This difference in magnetic parameters can be used for selective testing of the surface hardening quality. It has been shown that the hardened layer pushes the magnetic flux into the depth of the magnetized object. The nominal depth of penetration of the flow monotonically increases with an increase in the thickness of the hardened layer.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.93-102
• /
• 2000

The objective of the present study is to investigate the pressure-strain correlation terms of the Reynolds stress models for the three dimensional turbulent boundary layer in a $30^{\circ}$ bend tunnel. The numerical results obtained by models of Launder, Reece and Rodi (LRR) , Fu and Speziale, Sarkar and Gatski (SSG) for the pressure-strain correlation terms are compared against experimental data and the calculated results from the standard k-${\varepsilon}$ model. The governing equations are discretized by the finite volume method and SIMPLE algorithm is used to calculate the pressure field. The results show that the models of LRR and SSG predict the anisotropy of turbulent structure better than the standard k-${\varepsilon}$ model. Also, the results obtained from the LRR and SSG models are in better agreement with the experimental data than those of the Fu and standard k-${\varepsilon}$ models with regard to turbulent normal stresses. Nevertheless, LRR and SSG models do not effectively predict pressure-strain redistribution terms in the inner layer because the pressure-strain terms are based on the locally homogeneous approximation. Therefore, to give better predictions of the pressure-strain terms, non-local effects should be considered.

• Advances in materials Research
• /
• 제1권2호
• /
• pp.109-113
• /
• 2012

Electromigration-induced void evolutions in typical upper and lower layer dual-inlaid Copper (Cu) interconnect structures were simulated by applying a phenomenological model resorting to Monte Carlo based simulations, which considers redistribution of heterogeneously nucleated voids and/or pre-existing vacancy clusters at the Copper/dielectric cap interface during electromigration. The results indicate that this model can qualitatively explain the electromigration-induced void evolutions observations in many studies reported by several researchers heretofore. These findings warrant need to re-investigate technologically important electromigration mechanisms by developing rigorous models based on similar concepts.

• 대기
• /
• 제14권3호
• /
• pp.29-40
• /
• 2004

It is well known that convections and fronts are the most effective weather systems for the vertical transport of pollutants. I used a two dimensional front model in order to investigate the mechanism of the vertical transport of atmospheric pollutants between planetary boundary layer(PBL) and free atmosphere by fronts. The main dynamic processes which contribute the vertical transport of pollutants are advection and diffusion. The transported amount of pollutant from the boundary layer to the free atmosphere increases dramatically during the developing stage of the front. 46% of pollutants are transported vertically within 12 hour and 54% are transported within 24 hour. In the meantime, compared to the total amount of pollutants transported by both advection and diffusion, about 25% (30%) less pollutants are transported when only advection (diffusion) process in included in the model. The most important mechanism for the vertical transport is vertical advection, while the vertical diffusion process plays an important role in the redistribution of pollutants in the PBL.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.434-438
• /
• 2010

The selenization process has been a promising method for low-cost and large-scale production of high quality CIGS film. However, there is the problem that most Ga in the CIGS film segregates near the Mo back contact. So the solar cell behaves like a $CuInSe_2$ and lacks the increased open-circuit voltage. In this study we investigated the Ga distribution in CIGS films by using the $Ga_2Se_3$ layer. The $Ga_2Se_3$ layer was applied on the Cu-In-Ga metal layer to increase Ga content at the surface of CIGS films and to restrict Ga diffusion to the CIGS/Mo interface with Ga and Se bonding. The layer made by thermal evaporation was showed to an amorphous $Ga_2Se_3$ layer in the result of AES depth profile, XPS and XRD measurement. As the thickness of $Ga_2Se_3$ layer increased, a small-grained CIGS film was developed and phase seperation was showed using SEM and XRD respectively. Ga distributions in CIGS films were investigated by means of AES depth profile. As a result, the [Ga]/[In+Ga] ratio was 0.2 at the surface and 0.5 near the CIGS/Mo interface when the $Ga_2Se_3$ thickness was 220 nm, suggesting that the $Ga_2Se_3$ layer on the top of metal layer is one of the possible methods for Ga redistribution and open circuit voltage increase.

• 마이크로전자및패키징학회지
• /
• 제30권2호
• /
• pp.52-59
• /
• 2023

팬 아웃 웨이퍼 레벨 패키지의 Cu 재배선층 적용을 위해 Ti 확산방지층과 폴리벤즈옥사졸(polybenzoxazole, PBO) 절연층 사이의 계면 신뢰성을 평가하였다. PBO 경화 온도 및 고온/고습 시간에 따라 4점 굽힘 시험으로 정량적인 계면접착에너지를 평가하였고, 박리계면을 분석하였다. 175, 200, 및 225℃의 세 가지 PBO 경화 온도에 따른 계면접착에너지는 각각 16.63, 25.95, 16.58 J/m² 로 200℃의 경화 온도에서 가장 높은 값을 보였다. 박리표면에 대한 X-선 광전자 분광분석 결과, 200℃에서 PBO 표면의 C-O 결합의 분율이 가장 높으므로, M-O-C 결합이 Ti/PBO 계면접착 기구와 연관성이 높은 것으로 판단된다. 200℃에서 경화된 시편을 85℃/85% 상대 습도에서 500시간 동안 고온/고습 처리 하는 동안 계면접착에너지는 3 .99 J/m²까지 크게 감소하였다. 이는 고온/고습 처리동안 Ti/PBO 계면으로의 지속적인 수분 침투로 인해 계면 근처 PBO의 화학결합이 약해져서 weak boundary layer를 형성하기 때문으로 판단된다.