• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.67-78
• /
• 1993

In one bath dyeing system of silk/PET fiber blend fabric with acid/disperse dyes, adsorption behavior of disperse dyes and acid dyes on silk and PET fabrics were examined. In the dyeing of PET with C.I.Disperse Red 19(Red 19) and C.I.Disperse Red 60(Red 60) at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake with Red 60 was higher than that with Red 19. When the silk/PET dyed with Red 19 and Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake on PET was influenced by affinity of the dye to the silk fabric dyed together. When the silk/PET dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$ for 60 minutes, color of PET dyed with Red 19 and Red 60 was little influenced by Blue 80 but silk dyed with Blue 80 was influenced. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• 산업기술연구
• /
• 제20권A호
• /
• pp.51-56
• /
• 2000

The Photocatalytic decolorization and degradation of commercial dyes were studied using a batch reactor. Degussa P25 titanium dioxide and $H_2O_2$ were used as the photocatalyst and proved to be effective for dyes degradation when they were irradiated with UV light. The light source was a 20W low pressure mercury lamp. Three different kinds of dyes, such as direct dye(congo red), acid dye (acid black) and disperse dye(disperse blue) were tested. Extending the UV only treatment up to 120min, direct dye was decolorized to 60% and degraded to 30% as COD. On the other side, acid and disperse dyes were eliminated less than 10% as color and COD. But, color and COD were eliminated about 90% for all of the three dyes by $UV/H_2O_2$ system. And then the most effective decolorization was done for direct dye with 96% removal efficiency by $UV/TiO_2$ system at 120min with 500mg/L of $TiO_2$.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.87-98
• /
• 1996

In this study, benzoxazolo carbocyanine dye was used as sensitizer for photographic emulsion, and the photographic characteristics were examined. The basic properties of sensitizer such as stability in various solvents were examined. The sensitizer was very stable in methanol, acetonitrile, acetone, dimethylformamide, and chloroform solution. Absorption spectra of benzoxazolo carbocyanine dye $2.5{\times}10^{-6}M$ and $5{\times}10^{-6}M$ concentrations in 10% aqueous methanol solutions containing $10^{-2}M$ potassium chloride show the monomer-J-aggregation characteristics. Compared to the absorption peak of the monomer in pure methanol solution, the red shifts of the monomer-J-aggregate peaks of benzoxazolo carbocyanine dye of $2.5{\times}10^{-6}M$ and $5{\times}10^{-6}M$ concentrations in 10% aqueous methanol solutions containing $10^{-2}M$ potassium chloride are 34nm respectively, and the sensitizing peak of benzoxazolo carbocyanine dye in photographic emulsion has red shift of 34nm. Therefore, if was concluded that benzoxazolo carbocyanine dye can be used as green sensitizing dye for the spectral sensitization of photographic emulsion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1466-1468
• /
• 2001

For the full color organic electro-luminescent device, essentially, red, green, and blue emissions are required. But red emission is not to reach minimum level of practical use 31[lm/W]. In order to optimize color purity and power consumption requirements, it is important for the materials development efforts to search for improvements in red emission effisiency. In this study, the bis(8-oxyquinolino)zinc II ($Znq_2$) were synthesized successfully from zinc chloride($ZnCl_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye(DCJTB)-doped and inserted $Znq_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4.4'-diamine(TPD), and the host material of emission layer is $Znq_2$. For the inserting of $Znq_2$, efficiency increased.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.221-225
• /
• 2005

A Staphylococcus sp. EY-3 with the capability of decolorizing Congo Red was isolated from soil at an effluent treatment plant of a textile and dyeing industry. This strain was able to almost completely decolorize a high concentration of Congo Red in 48 h under aerobic conditions. Optimal color removal (more than 96%) was achieved at 30- 40oC, and no noticeable effects of different pH values (5.5- 8.0) on decolorization were observed. This strain also exhibited a remarkable decolorization capability against azo dyes under aerobic conditions, even at a high concentration (dyes 1 g/l) of dye. The metabolic product of Congo Red degradation by this strain was identified by gas chromatography with mass selective detection (GC/MSD) to be an amine derivative benzidine.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권4호
• /
• pp.309-312
• /
• 2004

Aspergillus sojae B-l0 was immobilized and used to treat model dye compounds. The model wastewater, containing 10 ppm of azo dyes such as Amaranth, Sudan III, and Congo Red, was treated with cells attached to a rotating disc contactor (RDC). Amaranth was decolorized more easily than were Sudan III and Congo Red. Decolorization of Amaranth began within a day, and the dye was completely decolorized within 5 days of incubation. Both Sudan III and Congo Red were almost completely decolorized after 5 days of incubation. Semicontinuous decolorization of azo by reusing attached mycelia resulted in almost complete decolorization in 20 days. This experiment indicated that decolorization was successfully conducted by removing azo dyes with Aspergillus sojae B-10.

• Journal of Ginseng Research
• /
• 제16권3호
• /
• pp.217-221
• /
• 1992

Total polysaccharide contents in Panax ginseng roots were evaluated by a spectrophotometry, utilizing the complex formation of ginseng polysaccharide with alcian blue dye in 50 mM ammonium biphosphate, pH 4.2. The total polysaccharide content in red ginseng was about three times higher than that in fresh ginseng when both were extracted with water, and was increased about two times when red ginseng was extracted with an alkaline solution. The determination of total polysaccharide in various parts of ginseng revealed that main roots contained the component more than fine roots. Fresh ginseng sections stained by the dye showed polysaccharide mainly found in cortex and cambium but not in epidermis. Pattern-analysis on total and acidic polysaccharides from fresh and red ginsengs exhibited that the chemical compositions of the polysaccharides extracted from both ginsengs quite differed from each other.

• 미생물학회지
• /
• 제33권4호
• /
• pp.252-256
• /
• 1997

담자균류 백색부후균의 일종인 흰구름버섯(Coriolus hirsutus)을 실험균주로 하여 수종의 난분해성 방향족염료의 분해능을 측정하였다. 사용된 4종류의 염료 중, triphenyl methane 염료인 bromophenol blue가 탈색율 95% 이상으로 가장 잘 탈색되었으며, Congo red와 Poly R-478은 이보다는 낮은 57%, 55%가 탈색되었다. 그러나, heterocyclic 염료인 methylene blue는 본 균주에 의해 거의 탈색되지 않았으며, UV-visible spectrum상에서의 심색성 이동만 관찰되었다. 세포외 laccase와 peroxidase의 활성은 각 염료의 탈색율과 비례하여 나타났으며, 최대 활성 또한 최대 탈색시기에 관찰되었다. 효소의 활성 염색시 모든 염료의 탈색배지에서 공통적인 laccase와 peroxidase의 활성 띠가 관찰되었다. 이러한 결과로 볼 때, 세포외 laccase와 peroxidase가 난분해성 염료의 탈색에 중요한 역할을 할 것으로 판단된다.

• 대한화장품학회지
• /
• 제44권3호
• /
• pp.303-316
• /
• 2018

플루오레세인 구조를 갖는 잔틴계 염료의 형광안료로의 응용 가능성 및 제조되는 안료들의 광학 특성 조절 가능성을 확인하기 위하여 본 연구를 진행하였다. 안료 제조에는 수용성 잔틴계 염료인 eosin Y (D&C Red No.22), phloxine B (D&C Red No.28)를 주로 사용하였으며, 염료를 용매에 용해시켜 분체와 분산, 교반하고 이를 건조시켜 분쇄함으로써 안료를 제조 하였고, 제조된 안료들에 대해서는 형광과 관련한 광학 특성을 측정하였다. 사용한 용매의 종류, 염료의 함량, 그리고 염료의 혼합 투입 비율에 따라서 안료의 광학적 특성이 변함을 관찰하였다. 실험 결과에 따르면, 분체에 흡착된 염료 중 일부분이 형광 발색을 하며, 나머지는 형광에 기여하지 않는 것으로 보인다. 안료를 구성하는 분체-염료 계 내부의 결합 (혹은 상호작용) 세기와 그 특성을 파악하기 위한 안료 수세실험 결과, 안료 계 내에는 서로 다른 2개 이상의 상호작용이 존재하며, 그 중 하나는 용매-염료 상호작용보다 비교적 강하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.358-360
• /
• 2001

In this study, the bis(8-oxyquinolino)zinc II (Znq$_2$) were synthesized successfully from zinc chloride (ZnC1$_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye (DCJTB)-doped and inserted Znq$_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4,4'- diamine(TPD), and the host material of emission layer is Znq$_2$. And we study the electrical and optical properties of devices. We found that the device using Znq$_2$ inserting layer result in the increased efficiency.