• Clean Technology
• /
• v.16 no.2
• /
• pp.88-94
• /
• 2010

The physiological roles of various wavelength of light emitting diode (LED) on ‘Hayward’ kiwifruit experiencing after-ripening were investigated. Various wavelengths from LED light source were irradiated on kiwifruits kept in plastic bags or under open air at $25^{\circ}C$. During two weeks of storage, firmness of Hayward kiwifruits was decreased by $25^{\circ}C$ treatment than by $4^{\circ}C$ treatment. In the $25^{\circ}C$ storage condition, the firmness of kiwifruits was decreased by the treatment of 380 nm UV and 470nm white LED light source. Sweetness of kiwifruits treated with 380 nm UV LED and dark condition at $25^{\circ}C$ increased higher than $15^{\circ}$Brix. The acidity of kiwifruits under open air was decreased 52% by incubating at $25^{\circ}C$ with 660 nm red LED treatment. The acidity of kiwifruits in plastic bags was decreased 52.6, 55.6, 52.8% by the treatment of 440 nm blue, 470 nm white and 660 nm red LED light source, respectively, compared to that of kiwifruits incubated in darkness at $25^{\circ}C$. Decreased acidity irradiated by 660 nm red LED light source can be applied for regulating periods of the kiwifruit after-ripening process. LED light sources emit very narrow wavelength with a power-saving mode, therefore, the usage of these LED light source for regulating the after-ripening process can be classified as a clean biotechnology producing safe and environment-friendly kiwifruits.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.856-859
• /
• 2012

In order to cultivate vegetables in plastic greenhouse or housing facilities it was investigated properties of radiation and functions of LED lamp and proposed application possibility. Against presently existing method of obtaining blue and red colored wave lights needed to plants growing, it was used white LED and red LED to investigate growing conditions as well as brightness and color sense with working condition. And also it was presented lighting system of selective wave functions to promote plant growth.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.245-252
• /
• 2018

This study investigated the effect of LED light wavelength (color) on reproductive hormones and egg production of brown laying hens raised on floor. Red, blue, green and white colors of LED light were four treatments with four pens per treatment. One hundred forty four Hy-line brown laying hens (47 wks old) were allocated in a floor pen for six weeks trial. Egg production, egg quality, yolk cholesterol and hormones ($17{\beta}$-estradiol, progesterone) concentrations in plasma and oviduct were analyzed. Egg production of red group was higher (P<0.01) than that of green group. Haugh unit of eggs from red group was higher (P<0.01) than that of blue and green groups. Egg weight of green group was heavier (P<0.05) than that of red group. Shell of blue group was stronger (P<0.05) than that of red and white groups. Shell color of white group was browner (P<0.01) than that of blue and green groups. Yolk cholesterol of red group was higher (P<0.01) than that of others. Plasma $17{\beta}$-estradiol of red group was higher (P<0.05) than that of others at $3^{rd}$ week, but that of white group was highest (P<0.05) at $6^{th}$ week. Oviduct progesterone of green group was higher (P<0.01) than that of others. The result showed that the LED colors affect the reproductive hormone concentrations, egg production, egg weight and egg quality. This study suggested that red LED would be the most appropriate color for floor raising brown laying hens to sustain the egg production when it begins to decline with aging.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.431-435
• /
• 2009

This study was conducted to compare the effect of various LED and UVa light to enhanced coloration of paprika fruits cultivars; 'Special', 'Helsinki'. Immatured paprika fruits were irradiated with red LED, blue LED and UVa lights which were high intensity (red: $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $70{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $3{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and low intensity (red: $20{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $0.25{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The coloration of 'Special' cultivar was increased the fastest in high intensity UVa light for 2 days after treatment. There were no significantly difference among treatments except the low intensity UVa light. The coloration of 'Helsinki' was increased the fastest in blue LED light, and followed by red LED light and UVa light for 2 days after treatment. The $a^*/b^*$ value of 'Special' and $b^*$ value of 'Helsinki' that indicated the paprika fruit coloration were generally higher high intensity LED and UVa lights than low intensity LED and UVa lights. We couldn't find out any significantly different coloration effect among all treatments in final days of coloration. and rather than UVa treatment fruit shrunk the surface of paprika fruits.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.98-106
• /
• 2014

This study was carried out to evaluate the plant growth rate according to the wavelength characteristics of LED light sources. In order to achieve this, red, green, blue and white LEDs were arrayed in a rectangle array consisting of LED modules which can be combined with each other.. This can facilitate the selection of the optimal characteristics of the light from monochromatic red, green, blue and white LEDs or mixed LEDs for plant growth. Experiments to evaluate the growth rate according to the wavelength characteristics of the LEDs with several plants, in this case ice plants, lettuce, barley, broccoli and chives, were performed.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.49-54
• /
• 2013

In this study, I was focusing on LED (Light Emitting Diode) light effect in growth of chrysanthemum. For this reason, I formed six monochromatic lights (red 650 nm, 647 nm, 622 nm, blue 463 nm, 450 nm, white), six mixed lights sources red : blue (9 : 1, 8 : 2, 7 : 3, 6 : 4, 5 : 5) and 3 control beds in light sources ratio between rad : blue (8 : 2) including sun light. It was totally 15 control beds. Depending on light investigation time in growth, 6/6 (on/off) was highest in the length of plant, the number of leaves, the fresh dry and leaf area. But statistical significance wasn't accepted in general. In case of monochromatic lights, length of plant and leaf area is biggest in the Blue 450 mm and the length of root is highest in RED 650 mm. Except for this 3 measuring points (length of plant, the number of leaves and fresh weight), sun light and white was highest. Besides there are monochromatic light effect but various wavelength range in light sources are needed to crop growth. In terms of mixed light resources, except for sun light, It turned out the length of plant is highest in the highest red light rate red : blue (9 : 1), and Red : white (7 : 3) is highest in fresh weight and dry weight. The sun light is the highest one in the leaf area. The results from LED light effect in growth of chrysanthemum are obviously effect on growth and building up the shape. We need to choose suitable light sources in the monochromatic lights and mixed lights for growing high quality of chrysanthemum or Supplemental Lighting.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.284-284
• /
• 2009

The LED of cultivation edible plants was compliance the variable of the photo-receptor pigment with the red light source and ultra red light source from long wave region. The mechanism of cultivation edible plants for each part was necessary the wavelength unit which is appropriate, the illuminant source, motor control and lens design of LED light source about plant. The photo-receptor pigment induces for a long daytime recognition, seed germination and anthesis etc, induction years exists in the state which is an inactivity within the cells and in compliance with the red light source to be converted in active

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.312-317
• /
• 2017

In the construction of a white LED, the region of the red emission is a very important factor. Red light emitting materials play an important role in improving the color rendering index of commercial lighting. These materials also increase the color gamut of display products. Therefore, the development of novel phosphors with red emission and the study of color tuning are actively underway to improve product quality. In the present study, heuristic algorithms were used to search for phosphors capable of increasing the color rendering index and color gamut. Using a heuristic algorithm, the phosphors that were identified were $SrGe_4O_9:Mn^{4+}$ and $BaGe_4O_9:Mn^{4+}$. Emission spectra study confirmed that these phosphors emit light in the deep red wavelength region, which can fulfill the requirement for the improvement in color rendering index and color gamut for a white LED.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.10-18
• /
• 2011

In order to develop highly-integrated RGBY(Red, Green, Blue, Yellow) LED light, a high thermal radiation ceramic package was manufactured, and the encapsulation process was applied with a vacuum printing encapsulation system(VPES). After the completion of vacuum printing, the shape of the encapsulation layer could be controlled by heat treatment during the curing process, and the optical power became highly increased as the encapsulation layer approached a dome shape. The optical characteristics involved in a Correlated Color Temperature(CCT), a Color Rendering Index (CRI), and the efficiency of RGBY LED light were able to be identified by the experimental designing method. Regarding the characteristics of the white light of RGBY LED light, which were measured on the basis of the aforementioned optical characteristics, CRI posted 88, CCT recorded 5,720[$^{\circ}K$], and efficiency exhibited 52[lm/W]. The chip temperature of RGBY LEDs was below 55[$^{\circ}C$] when the consumption power of LED chips was 0.1[W] for the red, 0.3[W] for the green, 0.08[W] for the blue, and 0.24[W] for the yellow. Also, the thermal resistance of the highly-integrated RGBY LED light measured by T3Ster was 2.3[K/W].