• 자원리싸이클링
• /
• 제26권4호
• /
• pp.9-18
• /
• 2017

최근 전자산업의 급격한 성장으로 전자부품스크랩의 발생량 역시 빠르게 증가하고 있다. 특히 전자부품스크랩의 구성부품 중 인쇄회로기판(PCB)은 금, 은, 구리, 주석 및 니켈 등 일반금속부터 귀금속 및 희소금속까지 포함하고 있는 중요한 재활용 대상이다. 하지만 국내에는 일부 대기업을 중심으로 한 PCB 처리 및 재활용 기술이 상용화되어 있으며 그 외 처리량에 대해서는 정확하게 집계되지 않고 있는 실정이다. 이에 따라 몇몇 도시광산 업체 및 연구소, 대학교를 중심으로 기존 대기업 중심의 상용화 공정 외에 PCB로부터 유가금속을 회수하고 원료로 재사용하는 연구가 진행되고 있다. 따라서 본 연구에서는 국내의 폐 PCB의 처리 및 회수현황과 재활용 기술 동향을 분석하였고, 이를 통해 PCB 폐자원의 자원순환 활성화에 기여하고자 하였다.

• 소성∙가공
• /
• 제27권4호
• /
• pp.211-221
• /
• 2018

To estimate the recycling feasibility of high melt-indexed polycarbonate, 3.5 inch LGP, tensile, flexural and impact specimens were injection-molded and the LGP was shredded into scraps. The scraps were injection-molded again and this process was repeated for 4 times. Properties of the sample, i.e., optical properties, mechanical properties and number average molecular weight were measured at each cycle. Based on the results, as the number of reprocessing increased, transmittance decreased at low wavelength and color coordinate was changed systematically to yellow. Yellow index increased more than twofold during 4 recycling processes. On the other hand, the number average molecular weight decreased during recycling processes. Flexural and impact strength showed no tendency according to the number of recycling, but tensile strength decreased sharply after the third recycling process. Based on these properties, it was concluded that the number of recycling for high melt-indexed polycarbonate allowed in this study was one.

• 수산경영론집
• /
• 제54권3호
• /
• pp.93-114
• /
• 2023

Around the 1980s, with government's promotion and dissemination policies for FRP (Fiberglass Reinforced Plastics) of the government as a main material of fishing boats, approximately 97% of the entire fishing boats in Korea have utilized FRP until now. Nevertheless, diverse social and environmental issues have emerged due to the susceptibility to fire and the generation of substances detrimental to human health during the construction process of FRP fishing vessels. Especially, the high disposal cost and the limitation of recycling technology in the disposal process of FRP fishing boats have elicited attention to circular economy. This research intended to grasp the management status and problems of disposed FRP fishing boats in Korea, and to assess the level of competitive advantage of FRP fishing boats' recycling technologies of FRP fishing boats based on VRIO (Value, Rarity, Imitability, Organization) analysis through domestic and foreign management policies and related recycling examples. According to the survey of 161 respondents, including the industry, stakeholders and experts related to the collection, treatment and recycling of fisheries wastes, it was revealed that FRP fishing boats' recycling technologies of FRP fishing boats are at the level of 'unused competitive advantage' that satisfied the level of value, rarity and imitability, but not the level of organization.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.705-710
• /
• 2001

So for the quartz-glassy crucible wastes which was used for pulling up silicon-single-crystal ingot have simply reused for refractory raw-materials, or exhausted. This study is concerned on the advanced recycling-technology that is obtained by the proper micro-particle preparation process in order to fabricate fine amorphous silica filler for EMC (Epoxy Molding Compound). Therefore, this paper will deal with the physical, chemical and thermal pre-treatment process for efficient impurity removal and with the proper micro-particle process for producing the amorphous silicafiller. In view of the results, if the chemical, physical and thermal pre-treatment process for efficient elimination of impurity was passed, the purity of wasted fused glassy crucible is almost equal to the its of first anhydrous quartz glass. Thus, it was understood that this wasted fused glassy crucible was sufficient value of recycling, though it was damaged. When the ingot was fabricated, Phase transformation of crystallization by heat treatment (heat hysteresis phenomenon) was not changed. So, it was understood that as fused silica in the amorphous state, as It is, recycling possibility was very high

• 자원리싸이클링
• /
• 제5권1호
• /
• pp.9-13
• /
• 1996

Once-used $CO_2$-silicate bonded sand from domestic foundry is mostly discarded in a reclaimed land because of its bad collapsibility and reproduction properties. So this causes serious environmental problem. We can get 82% recovery of silica from used sand by scrubbing reclamation process in this research. When we repeat the reclamation-recycling of the foundry sand, artificial silica sand is broken down below 2-cycles, but natural silica sand does not destroyed when used repeatedly more than 10-cycles and have a good property of recycling with little change of its size.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.1-7
• /
• 1999

This study was carried out to simulate the change of various properties of recycled water when zero-discharge system was applied to a KOCC recycling process. contaminants such as chemical oxygen demand, anionic trash, and calcium hardness were gradually increased in the process water as the recycling was repeated . Especially, the increase of anionic trash and COD were closely related to the starch derived from corrugating adhesive in KOCC. Four kinds of water were compared in the preparation of handsheet to evaluate the performance of retention program. Waters used in this work were laboratory tab water, process water from Dong-II mill and the same one treated by UASB process, and closed white water prepared by KRICT. The result revealed that one the major factors fro reducing a retention power was the anioni trash accumulated in the recycled water.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.387-392
• /
• 2001

Kobe Steel, LTD. and Midrex Technologies Inc. jointly developed the FASTMET$\circledR$ process as a steel mill waste recycle technology in which the DRI product meets BF feed material or BOF/EAF feed material requirements. FASTMET(R) process turns value-less wastes into valuable DRI and sellable zinc oxide, and gives the solution for the steel mill wastes recycling from both economical and environmental viewpoints. During the development of the process, Laboratory, Pilot Plant and Demonstration Plant tests were carried out from 1990 to 1998. The first FASTMET(R) commercial plant began operation in April, 2000 and the second commercial plant started in April, 2001 Both commercial plants have proceeded successfully preying that FASTMET$\circledR$ is a suitable process for recycling steel mill waste and for producing DRI as an iron source.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.187-197
• /
• 2004

The recycling cell formation problem means that disposal products are classified into recycling product families using group technology in their end-of-life phase. Disposal products have the uncertainties of product condition usage influences. Recycling cells are formed considering design, process and usage attributes. In this paper, a new approach for the design of cellular recycling system is proposed, which deals with the recycling cell formation and assignment of identical products concurrently. Fuzzy ART neural networks are applied to describe the condition of disposal product with the membership functions and to make recycling cell formation. The approach leads to cluster materials, components, and subassemblies for reuse or recycling and can evaluate the value at each cell of disposal products. Disposal refrigerators are shown as an example.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.111-123
• /
• 2000

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences. Recycling cells are formed considering design, process and usage attributes. In this paper, a novel approach to the design of cellular recycling system is proposed, which deals with the recycling cell formation and assignment of identical products concurrently. Fuzzy clustering algorithm and Fuzzy-ART neural network are applied to describe the states of disposal product with the membership functions and to make recycling cell formation. This approach leads to recycling and reuse of the materials, components, and subassemblies and can evaluate the value at each cell of disposal products. Application examples are illustrated by disposal refrigerators, compared fuzzy clustering with Fuzzy-ART neural network performance in cell formation.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.83-91
• /
• 1996

A recycling soap was prepared from non-cooking oils. The effects of physlcal and chemical properties of the recycling soap on biodegradation are expected to be different due to the thermal histories of the non-cooking oils. Therefore, the biodegradation rate of the recycling soap was studied by using Klebssella Pneumoniae(K. pneumoniae), and the growth rate of K. pnewoniae in soap solution was observed. The biodegradation rate of the recycling soap appeared to be slower as the thermal histories of the non-cooking oils became larger. This might be resulted from hydrolysis, in which the ester bonds in the oils are broken to produce hydroxyl group. It was also observed that the growth rate of the microorganism decreased with the increase in the thermal histories of the oils. As a result, it is desired that recycling soap should be produced from the non-cooking oils with the prober ranges of thermal histories to reduce water contamination. The non-cooking oils with larger thermal histories are considered to be recycling through the cracking process before used. Key Words : non-cooking oils, recycling soap, thermal history, biodegradation, microorganism growth.