• Resources Recycling
• /
• v.33 no.1
• /
• pp.3-14
• /
• 2024

Owing to technological advancements and energy-saving policies, the demand for LED is increasing, leading to rapid industry expansion. Consequently, efficient recycling of accumulated LED waste has become a growing social concern, and current recycling status of LED waste resources and future directions were reviewed. Currently, waste LED recycling is focused on Ga recovery. Therefore, the development of integrated recycling technologies such as pre-treatment and concentration/recovery of high valued materials is necessary. In this study, we investigated the status and recycling technologies of waste LED and presented prospects.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.70-80
• /
• 2013

Waste refrigerator is the most large amount of item being recycled and the recycling process is the most complicated in WEEE (Waste Electrical and Electronic Equipment) because refrigerator is biggest product and consists of various parts and materials such as ferrous, non-ferrous, and plastics. Recently, recycling process of waste refrigerator has been being more complex since large capacity 2 door refrigerators and standing Kimchi refrigerators with various material are distributed on custom market. In addition, recycling of valuable resource from waste refrigerator is mandatory by WEEEs recycling legislation; therefore, high efficiency recycling enough for economic and environment-friendly recovery of valuable resource through present technical situation analysis and comparison of recycling technologies of waste refrigerator with advanced country.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.79-89
• /
• 2023

One of the foremost environmental challenges, alongside the contemporary focus on achieving carbon neutrality, pertains to the pervasive issue of plastic waste. Thermochemical recycling technology, operating under high-temperature conditions to covert organic matter and recycle it into raw materials and energy, represents a transformative approach surpassing the conventional bounds of material recycling predominantly applied in plastic waste management. The thermochemical recycling paradigm is emerging as a pivotal technology within the circular economy, capable of transforming waste plastics into raw materials for producing original plastics. Its significance extends beyond national borders, garnering global attention due to its versatility as a chemical or energy recycling method, contingent upon the subsequent processes and final products. This study aims to scrutinize three quintessential thermochemical recycling technologies: combustion, gasification, and pyrolysis. Furthermore, the study discusses the recent major technology trends of these technologies.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.59-64
• /
• 2001

On July 5, 1997, environmental Protection Administration of Taiwan publicized the recycling regulation of waste home appliances that include four items, namely, television, refrigerator, washing machine, and air conditioner. It is believed that this regulation pioneers the law enforcement of waste home appliances in the world. To comply with tile policy, several contemporary waste disposal plants specialized in waste home appliances were established according to a follow-up technical specification oil the waste treatment facilities and methodology. Therefore, the traditional dismantling facilities were substituted and waste collection routes were altered as well accordingly. This study investigates the collection and recycling costs of waste home appliances in accordance with these newly established routes and facilities, respectively. Cost survey was conducted among collectors and recycling plants of waste home appliances; consequently, tire collection and recycling costs were analyzed, correspondingly. Results show that the recycling costs of waste home appliances were much higher than that of other waste items. Since the market share of recycled materials is lacking, these waste recycling plants of home appliances can only survive under the subsidy of EPA in Taiwan. Due to some arduous problems, the subsidiary system has already caused serious financial unbalance for a foundation under EPA of Taiwan, which associated with waste recycling in Taiwan.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.74-81
• /
• 2019

Upcycling generally refers to the conversion of waste materials to something useful or valuable and is a useful concept that can be applied not only to the waste design industry but also to waste recycling and resource circulation. Our study highlights upcycling as the key concept for improving the value of waste by redefining the concept as "the recycling of waste materials and discarded products in ways that enhance their value." Four upcycling strategies are linked to material flow analyses conducted on waste electronic and electrical equipment, specifically waste refrigerators and waste computers, to examine the technologies available for implementation and suggest guidelines for the promotion of upcycling. The amount of waste refrigerators collected by the formal sector was 121,642 tons/y and the informal sector, 63,823 tons/y. The current recycling ratio of waste refrigerators was estimated as 88.53%. A total of 7,585 tons/y of waste computers were collected by the formal sector and 3,807 tons/y by the informal sector after discharge. Meanwhile, the current recycling ratio of waste computers was estimated as 77.43%. We found that it is possible to introduce 28 upcycling technologies in the case of refrigerators, and 15 technologies are available to promote upcycling in the case of computers. By refining the broad concept of upcycling and looking at the stages of material flow, our approach presents universally applicable directions for incorporating upcycling in resource recovery and recirculation plans.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.12-21
• /
• 2013

Waste electrical and electronic equipment(WEEE or E-waste) is one of the fastest growing waste stream in Korea. The proper management of such equipment has become of major concern for solid waste professionals because of the large growth of the waste stream and the presence of a myriad of toxic materials in it. In this paper, in order to evaluate the economical value of the recycling metallic materials from the E-waste, big size electrical home appliances, small size electrical home appliances, end of life hand phone and PCB(printed circuit board) were reviewed.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.16-33
• /
• 2011

Waste electrical and electronic equipment(WEEE or E-waste) is one of the fastest growing waste stream in Korea. The proper management of such equipment has become of major concern for solid waste professionals because of the large growth of the waste stream and the presence of a myriad of toxic materials with in it. In this paper in order to review the recycling system and recycling industries of the E-waste in Korea, the main frame concerning recycling of "Act on the Resources Recycling of Waste Electrical Electronic Equipment(WEEE) and End-of-life vehicles", recycling system, current recycling status, estimation of the E-waste generation, material flow of the E-waste, economics of PCB and recycling industries of the E-waste were surveyed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.167-168
• /
• 2020

In order to expand the material recycling of waste plastics made of composite materials, it is necessary to develop the use of material recycling products and to secure their quality stability. In this paper, as a basic study to secure the stability of the quality of household waste plastic material recycling products, the quality characteristics of recycled materials according to the production period were compared and reviewed. In addition, the average tensile strength of the recycled products by production period for 4 months was 12.33 MPa, and the average density was 1.35 g/m3.

• Journal of Environmental Health Sciences
• /
• v.37 no.2
• /
• pp.150-158
• /
• 2011

This research was conducted to estimate the physicochemical characteristics of waste catalyst and its in-process product from recycling and to suggest fundamental data for religious systems such as quality standards. Mo and V contents were increased from the waste catalyst to calcinated material and oxidized material. In the results of a heavy metals leaching test, Pb was not detected in any catalyst, calcinated and oxidized materials. Cu was not detected in the catalyst. However, it was detected in ${\leq}$1.16 mg/l for calcinated material and in 1.34~13.73 mg/l for $MoO_3$ oxidezed material. Concentrations in recycling in-process products (calcinated and oxidized materials) were higher than those of waste catalyst. Oil content of catalyst waste ranged from 0.01-14.03 wt%. Oil contents of calcinated and oxidized materials were greatly decreased compared to the catalyst waste. Carbon and sulfur contents as chemical poisoning material of catalyst waste ranged from 0.33-76.08 wt% and 5.00-22.00 wt%, respectively. The carbon contents of calcinated and oxidized materials showed below 20 wt%. The sulfur content showed below 8wt% for calcinated material and below 0.22 wt% for oxidized material.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2001

As construction and expansion of wastewater treatment works is continuing, generation of sludge is increasing. Bur most sludge is not used appropriately but disposed by landfill dumping to sea. Furthermore direct landfilling of sludge cake containing moisture content over 75% has been legally prohibited since 2001 that's enforcement will be more strict in 2003. Such a situation means nowadays recycling of organic waste such as sludge and food waste is necessary. Composting is one of recycling methods commonly and used as an effective means of stabilizing organic waste and then compost can be used as fertilizer. However fertilizer law management which include standard of compost products and other fertilizers applied all sludge products indiscriminiately and was not flexible. So MOE has graded organic composts according to land applications to improve recycle of organic wastes. The classified organic compost which contains low contaminants has been possible to use as various purpose. This study enalyzed 30 samples which were raw materials for compost and compost products management well and to estimate the quality of compost products. Heavy metals were measured in Raw materials and OM/N, NaCl and VS were tested in compost products as well as heavy metals. As a result, approximate 10% of raw materials was not suitable to the grade A and 6.7% over the grade B of the regulation on raw materials for compost. In the case of 30 produced compost propducts approximate, 57% of composts was not compatible with the grade A and B of the regulation on composting product. The qualities of compost products were worse than raw materials, because the compost products have more regulation item raw materials have.