• 자원리싸이클링
• /
• 제33권2호
• /
• pp.24-36
• /
• 2024

리튬이온전지 재활용 공정은 직접 재활용, 습식제련공정, 건식제련공정으로 분류되어 왔으며, 습식제련공정 기반 상용공정은 해체, 파분쇄, 열처리, 선별 등으로 구성된 전처리 공정으로 블랙매스를 생산하고 습식제련공정으로 각 금속을 회수한다. 개발 중인 모든 리튬이온전지 재활용공정은 전구체 원료 제조를 위해 전처리공정 후 침출 등의 습식제련공정을 진행하기 때문에 이 글에서는 재활용공정의 전처리공정에 따른 분류법을 제시하였다. 현재 개발 중인 주요 공정은 황산염배소, 탄소열환원, 합금제조 등이며, 전처리공정에서 미이용 부산물의 활용이 가능할 경우 리튬이온전지 재활용 공정의 경제성 향상이 가능하리라 판단된다.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.821-827
• /
• 2001

새로운 저전력 전하 재활용 롬(charge recycling ROM) 구조를 제안하였다. 전하 재활용 롬은 전력 소모를 줄이기 위하여 전체 롬에서의 소모전력의 약90%를 소모하는 비트라인(bit line)에 전하 재활용 방식을 사용한 롬이다. 제안된 방식을 사용하였을 경우, 비트라인의 수가 무한이 많고 감지 증폭기(sense amplifier)가 무한히 미세한 전압차를 감지할 수 있다면, 롬의 비트라인은 전력을 거의 소모하지 않는다. 그러나, 실제 존재하는 감지 증폭기는 매우 작은 전압차를 감지할 수 없기 때문에, 롬에서의 전력 감소량은 제한된다. 모의 실험 결과는 전하 재활용 롬이 기존의 저 전력 콘택트 프로그래밍 롬(contact programming ROM)의 13% ∼ 78% 전력만을 소모함을 보여준다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.563-568
• /
• 2003

Recently, the recycled amount of electric, mechanical parts, and appliances in artifacts has increased. These products use valuable rare metals such as platinum group metals and gold, which are included occasionally as additives. Rare metals are maldistributed in the world and most of them are produced in small quantities. A small amount of rare metals used in the appliances causes a large loss of rare metal resources because of the lack of an economically recycling method. The present recycling technologies including physical and chemical separation methods that are considered for recycling of electric, mechanical parts and appliances.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.226-229
• /
• 2001

For volume reduction of the wastewater generated on washing the soil contaminated with cobalt, recycling and reuse experiments of the wastewater were executed. Also. the soil remediation efficiency by repetitive washing with fresh citric acid was analyzed. The soil around TRIGA was sampled for the experiment. Results of recycling experiment by replacement-precipitation method were as follows. The remediation efficiency of 1st recycling wastewater was 97% and that of 2nd recycling wastewater was 94%. Also, To obtain remediation efficiency over than 90%, the 5th repetitive washing with fresh citric acid was needed.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.34-41
• /
• 1999

Adsorption of cationic polyacrylamide dry strength resins onto the surface of papermaking fibers and fines is critical for their effective utilization. Since dry strength resins are frequently employed when recycled fibers containing a great deal of fines are used as a raw material, their adsorption characteristic onto the recycled fiber fines is of great importance. In this study, effects of recycling on adsorption characteristics of cationic polyacrylamide onto primary and secondary fines were examined. Never dried bleached hardwood kraft pulp was beaten and dried for recycling. In each recycling step the adsorption characteristic of a cationic PAM onto primary and secondary fines was evaluated by kjeldahl nitrogen analysis method. The influence of recycling on water retention value and carboxyl content along with the sheet density and tensile strength was examined. Secondary fines of never dried pulp adsorbed twice as much of C-PAM as the primary fines, however, the adsorption capacity of the secondary fines decreased rapidly during the course of recycling and showed lower adsorption capacily than primary fines.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.123-131
• /
• 2014

Whole amount of waste water, approximately 921.6 liter, for cleaning a ready mixed concrete truck should be used to produce concrete as a mixing water or cleaning water. Recycling water for concrete mixing contains solids, which cause decrease in slump, air and compressive strengths, so it may influence on poor concrete quality. Therefore, it has been maintained to use recycling water with less than 3 percent of solids. Since no evaluation system has been constructed to directly reflect on variability of recycling water from ready mixed concrete plants, it is necessary to develop "Automatic recycling solid measuring system" for quality controls in real time. In this research, sensors measuring waste water concentration in ultrasonic and inductance methods were developed, and automatic system using the sensors were established. The accuracy of measurement sensors developed for recycling water based on various conditions of concentration was proved, and application limits were evaluated. Also, concentration of recycling water using sensors developed from ready mixed concrete plant was measured, and curing method verified the accuracy of the sensors. Moreover, measurement sensors for recycling water in various locations were installed to evaluate the effects on measuring method and spots. The automatic measuring system for recycling water concentration, which is developed in the research, will contribute to improve concrete quality safety through reliable solids maintenance.

• 웰빙융합연구
• /
• 제7권3호
• /
• pp.1-11
• /
• 2024

Purpose: The purpose of this study is to present an efficient emission reduction ratio of plastic to reduce carbon dioxide, the main cause of greenhouse gases. Research design, data and methodology: This study calculated the absolute value of carbon dioxide by setting an equation through the emission coefficient using the US EPA's WARM model. Results: In the recycling ratio of 70%, it was found that the energy recovery ratio was 15.6%, which was the energy recovery ratio without generating carbon dioxide. When carbon dioxide is generated by changing plastic waste emissions, optimal efficiency is achieved by reducing emissions by 10% to 30% of energy recovery ratio, 20% to 50% of energy recovery ratio, and 30% to 80% or more of energy recovery ratio. Conclusions: The recycling rate should be set at a minimum of 70%, so that a carbon dioxide-free energy recovery rate could be obtained during the recycling process, supporting an eco-friendly basis for environmental policies aimed at this rate. In addition, it was possible to suggest that it is essential to reduce emissions by at least 30% for eco-friendly recycling measures that can achieve both economic and environmental feasibility in the energy recovery process through incineration during recycling in Korea.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.162-164
• /
• 2003

• 유기물자원화
• /
• 제10권1호
• /
• pp.128-138
• /
• 2002

폐기물 재활용은 폐기물 관리에 있어서 감량화 다음으로 중요한 개념이다. 폐기물 중 특히 포장폐기물은 재활용시 환경성과 경제성을 지니고 있어 재활용이 용이하다. 그러나 그 중에서도 포장폐기물 중 점점 더 증가 추세에 있는 화장품용기는 재활용품목이 아닌 일반폐기물로 분류되어 버려지고 있다. 화장품 산업의 규모와 비례하여 나타나는 산업쓰레기의 처리문제는 심각한 환경문제를 유발하는 요인이 되고 있다. 또한 화장품은 대부분 플라스틱과 유리 등 복합재료로 만들어져 있어 재활용하기가 어렵다. 화장품용기는 분리수거 하기도 힘이 들고 분리 수거한 용기들도 재질이 복합적이기 때문에 재생이 어려운 경우가 많다. 이에 본 연구에서는 현재의 화장품 용기 재활용과 관련하여 갖고 있는 소비자들의 의식을 조사하였다. 조사결과에 대한 용기 재활용을 위한 증진방안은 다음과 같다. 첫째, 화장품 용기 관련 법 및 제도개선 분야로 화장품법 및 예치금, 부담금 제도 개선과 화장품 용기류 재활용을 위한 기술개발, 리필제품의 확대, 화장품용기만의 회수체계 확립, 생산자의 화장품 재활용 적극 참여 유도가 이루어져야 한다. 둘째, 화장품 용기 디자인 개선 분야로 용기 재질 단순화 및 규격화,화장품 라이프 사이클 확대, 재활용 가능한 재료 선택, 화장품 용기의 비용감소, 기업의 재활용 용기 개발 적극 참여가 이루어져야한다. 결론적으로 포장폐기물 중 화장품 용기의 재활용을 증진하기 위해서는 관련 제도 개선 뿐만 아니라 정부와 기업의 적극적 참여,그리고 소비자들의 적극적 재활용의식이 종합적으로 발전을 이루어야 한다. 그리고 무엇보다도 기업에서 화장품 품질 개선을 위한 투자와 개발 뿐만 아니라 화장품 용기의 환경친화적인 용기 개발을 위하여 많은 노력이 우선시 되어야 할 것이다.

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1061-1068
• /
• 2022

The purpose of this study was to develop a recycling system for ozone off-gas. Although the ozone transmission rate of the injector method differs slightly depending on the ozone injection rate, it reaches approximately 99%, which is very high. During the increase in water inflow to the ozone recycling system from 2 L/min to 10 L/min, the average ozone recycling rate was 99.4% at a 1 ppm ozone injection rate, 98.6% at a 2 ppm ozone injection rate, 98.1% at a 3 ppm ozone injection rate. Ozone treatment facility operating costs can be divided into the costs of pure oxygen production, ozone production, and maintenance. The annual operating costs of ozone treatment facilities in Korea are estimated to be approximately 38.9 billion won. The annual savings are estimated to be approximately 5.8 billion won when the ozone transfer rate of the diffuser method, which is mostly employed in domestic water treatment plants, is 85% and 15% of the ozone is recycled.