폴리머 콘그리트는 시멘트 콘크리트에 비해 강도와 내구성에 탁월한 성능을 가지고 있기 때문에 건설현장에서도 다양한 용도로 개발되어 널리 사용되고 있다. 그러나 폴리머 콘그리트는 그 결합재로 쓰이고 있는 수지의 비용이 높아 PET를 재활용하여 콘크리트를 제조하면 제조 단가를 감소 시킬 수 있고, 환경파괴 및 환경오염의 방지에도 대처 할 수 있는 장점이 있다. 따라서, 본 연구에서는 폐 PET를 합성한 불포화 폴리에스터 수지를 폴리머 콘크리트의 결합재로 이용하여 폴리머 콘크리트보를 제조하였으며 기본 구조적 거동을 파악하기 위하여 정적 휨 시험 및 피로 시험을 실시하였다. 그 결과 정적 실험시 압축응력 분포는 거의 삼각형의 선형적 분포를 나타내었으며, 연성 능력도 우수하게 나타났다. 그리고 피로실험결과 극한 하중값 및 처짐값 등이 정적실험만 실시한 경우와 유사하게 나타난 것으로 보아 PET 재활용 폴리머 콘크리트 보는 우수한 휨 거동 특성을 그대로 유지하는 것으로 나타났다.
In the automotive industry, such as scrap metal and plastic scrap process is being recycled. Although the glass beads are used as road paving or other additives and processing crushing, recycling is known that there are limits. The utilization of waste glass was evaluated as a concrete admixture by using powder characteristics and chemical composition of the glass. As a result of using waste-glass powder as an admixture, it is difficult to expect the pozzolanic effect, but it is found that it can increase the fluidity of concrete and ensure the durability performance in the appropriate amount range.
Al-Bared, Mohammed A.M.;Harahap, Indra S.H.;Marto, Aminaton;Abad, Seyed Vahid Alavi Nezhad Khalil;Mustaffa, Zahiraniza;Ali, Montasir O.A.
Geomechanics and Engineering
/
제19권1호
/
pp.37-47
/
2019
The main objective of this study is to evaluate and compare the efficiency of ordinary Portland cement (OPC) in enhancing the unconfined compressive strength of soft soil alone and soft soil mixed with recycled tiles. The recycled tiles have been used to treat soft soil in a previous research by Al-Bared et al. (2019) and the results showed significant improvement, but the improved strength value was for samples treated with low cement content (2%). Hence, OPC is added alone in this research in various proportions and together with the optimum value of recycled tiles in order to investigate the improvement in the strength. The results of the compaction tests of the soft soil treated with recycled tiles and 2, 4, and 6% OPC revealed an increment in the maximum dry density and a decrement in the optimum moisture content. The optimum value of OPC was found to be 6%, at which the strength was the highest for both samples treated with OPC alone and samples treated with OPC and 20% recycled tiles. Under similar curing time, the strength of samples treated with recycled tiles and OPC was higher than the treated soil with the same percentage of OPC alone. The stress-strain curves showed ductile plastic behaviour for the untreated soft clay and brittle behaviour for almost all treated samples with OPC alone and OPC with recycled tiles. The microstructural tests indicated the formation of new cementitious products that were responsible for the improvement of the strength, such as calcium aluminium silicate hydrate. This research promotes recycled tiles as a green stabiliser for soil stabilisation capable of reducing the amount of OPC required for ground improvement. The replacement of OPC with recycled tiles resulted in higher strength compared to the control mix and this achievement may results in reducing both OPC in soil stabilisation and the disposal of recycled tiles into landfills.
본 연구는 농촌에서 발생되는 C급 폐비닐의 활용률 개선을 목적으로 아임계 열수를 거쳐 생성된 에코 파우더(Eco-powder)를 플라스틱 원재료로 활용하기 위한 기초연구이다. 생성된 에코 파우더의 회분함량 제어를 위한 선가공 처리의 효율과 생성된 에코 파우더의 회분함량에 따른 플라스틱으로서의 기초 특성을 평가하였다. 기초 특성으로서는 수준별 에코 파우더 활용 압축성형 시험체의 회분함량, 충격강도, 굴곡강도, 인장강도를 평가하였다. 실험 결과, 선가공으로 물리적인 충격을 통한 토사분과 폐비닐 부분의 분리 효율이 개선되는 것을 확인하였다. 또한 회분함량에 따른 충격강도, 굴곡강도, 인장강도 평가 결과, 회분함량 26% 이하 수준의 에코 파우더에서 목표로 하는 성능을 만족하는 것으로 나타났다. 이로써 기존 활용도 및 회수율이 낮던 C급 폐비닐을 아임계 열수 처리 후 물리적 가공 처리를 통해 최적 조건을 설정하여 플라스틱 원료로서 활용이 가능한 것을 확인하였다.
본 연구는 폐플라스틱 중 저급의 복합재질 필름류 포장재를 콘크리트 원재료로 활용하기 위한 기초 연구로, LLDPE 및 HDPE의 2종의 플라스틱으로 제작된 잔골재를 사용하여 혼입률을 0, 25, 50, 75, 100%로 증가시키면서 플라스틱 잔골재의 종류 및 혼입률이 모르타르에 미치는 영향에 대하여 실험적으로 평가하였다. LLDPE 잔골재 및 HDPE 잔골재 혼입 모르타르는 유동성 및 재료분리저항성, 밀도 및 흡수율, 재령별 압축강도 및 휨강도에서 유사한 경향을 나타내었다. 플라스틱 잔골재를 혼입하지 않은 모르타르 대비 플라스틱 잔골재 혼입 모르타르의 유동성은 혼입률 50% 까지는 증가하다가 혼입률 75% 이상에서는 감소하였으며, 플라스틱 잔골재의 혼입에 따라 모르타르의 재료분리저항성은 급격하게 증가하였다. 한편, 플라스틱 잔골재의 낮은 밀도로 플라스틱 잔골재 혼입에 따라 모르타르의 밀도는 감소하였으며, 플라스틱 잔골재와 시멘트 사이의 낮은 부착력으로 인하여, 플라스틱 잔골재 혼입에 따라 재령별 압축강도는 플라스틱 잔골재 혼입률에 비례하여 감소하였으나. 재령별 휨강도는 플라스틱 잔골재 혼입률 50% 이상에서 일정 수준을 유지하며 감소하는 것으로 나타났다.
Nur A. Atikah Kamaruddin;Norzilah A. Halif;Siti A. Hussin;Mohd. N. Mazlee
Advances in materials Research
/
제13권3호
/
pp.173-181
/
2024
Fly ash, plastic waste, and clay are mineral materials and residues commonly found in Malaysia. In this study, these materials were fully utilized as raw materials for synthesizing carbon nanotubes (CNTs). Recycled polypropylene, previously used as a food container, served as a carbon source. Fly ash and clay were explored as potential substrates for CNTs growth. The recycled polypropylene was thermally decomposed at 900 ℃ in an inert environment for 90 minutes. Carbon atoms released during this process were deposited on fly ash and clay substrates, which had been immersed in a ferrocene solution to provide a metal catalyst for CNTs growth. The deposited products were characterized using a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). Morphological analysis revealed that both fly ash and clay were coated with fiber-like structures, confirmed to be CNTs based on a diffraction peak around 26° from the XRD pattern. In conclusion, clay and fly ash demonstrate the potential to be utilized as substrates for CNTs formation.
폐 자동차에서 떼어낸 범퍼는 분쇄 및 도장 (paint)제거 공정을 거친 후 신재 (pristine materials)와 일정 비율 혼합하여 자동차 부품을 제조하는 공정에서 재활용된다. 본 연구에서는 신재와 도장이 제거된 범퍼 분쇄품을 일정 비율 혼합하여 혼합비에 따른 기계적인 물성 및 화학적인 성질을 연구하였다. 신재에 범퍼 분쇄 품을 혼합하였을 때 인장강도 및 굴곡탄성율과 같은 강성은 두 물질의 조성 평균으로 나타났지만, 충격강도와 파단 신율과 같은 인성 (toughness)은 조성 평균보다 낮은 negative deviation을 보였다. 이는 두 물질간의 혼화성이 부족하여 발생하는 결과라는 것을 FT-IR 분석을 통하여 알 수 있었다. 범퍼 분쇄품의 혼합 비율이 30% 이상에서 두 물성이 급격히 저하되었다. 이를 활용하면 최적의 배합 비율을 선정할 수 있을 것이다. 또한 이전 연구에서 밝힌 바와 같이 도장 제거율을 80 % 수준까지는 달성하기는 쉽지만 나머지 20%를 제거하기 위하여 많은 노력과 에너지가 소요되는 바, 도장이 제거되지 않은 분쇄품과 도장이 제거된 분쇄품의 혼합 비율에 따른 기계적인 물성에 대하여 실험하였다. 도장이 제거되지 않은 범퍼 분쇄품이 소량만 첨가되어도 기계적인 물성은 급격히 저하가 되어 폐 범퍼를 재활용하기 위해서는 도장 제거 공정이 매우 중요하다는 사실을 알 수 있었다.
본 연구에서는 폐복합필름 기반 콘크리트용 골재와 시멘트 기재 간의 친화성 향상을 위한 골재표면 개질 연구를 수행하였다. 표면 개질은 산소 대기압 플라즈마 방법을 사용하였으며, 표면처리에 따른 골재표면 특성을 접촉각 측정기를 이용하여 관찰하였다. 그 결과 플라즈마 표면처리에 따른 접촉각은 처리시간과 반비례 관계를 가지며 104.5°에서 44.0°까지 감소하는 것을 확인하였으며, 플라즈마 처리 후 대기 중에 보관된 골재의 접촉각은 시간이 경과함에 따라 다시 증가하는 것을 알 수 있었다. 플라즈마 처리된 골재의 접촉각 감소는 X-ray 광전자 분광법 및 적외선 분광법 결과로부터 골재표면에 친수성 산소 작용기가 형성되었기 때문으로 판단되었다. 결과적으로, RF power 100W, O2 flow rate 15sccm, Ar flow rate 4sccm, 30초 동안 표면처리를 한 골재의 경우 가장 좋은 친수성 및 젖음성을 관찰할 수 있었으며, 산소 대기압 플라즈마는 골재와 시멘트 기재 간의 결합력을 증가시킬 수 있는 하나의 효과적인 방법임을 알 수 있었다.
Addition of fibers in cement or cement concrete may be of current interest, but this is not a new idea or concept. Fibers of any material and shape play an important role in improving the strength and deformation characteristics of the cement matrix in which they are incorporated. The new concept and technology reveal that the engineering advantages of adding fibers in concrete may improve the fracture toughness, fatigue resistance, impact resistance, flexural strength, compressive strength, thermal crack resistance, rebound loss, and so on. The magnitude of the improvement depends upon both the amount and the type of fibers used. In this paper, locally available waste fibers such as coir fibers, sisal fibers and polypropylene fibers have incorporated in concrete with varying percentages and l/d ratio and their effect on compressive, split, flexural, bond and impact resistance have been reported.
본 연구에서는 현재 생활계 폐기물로 폐기되는 커피 캡슐의 재질분리 공정 개발을 통해 폐플라스틱의 재활용 가능성을 평가하였다. 1차 파쇄, 세척 및 체질을 통해 커피찌꺼기를 제거하고 2차 파쇄 후, 총 3번의 코로나 방전형 정전선별을 수행하는 재질분리 공정이 개발되었다. 이때, -10 mm 시료는 최적조건에서 알루미늄 제거율과 플라스틱 회수율이 각각 95.4%와 98.3% 이었으며, -15 mm는 각각 91.3%와 97.2% 이었다. 재질분리 된 폐플라스틱의 재활용 가능성을 평가하기 위하여, 시료를 펠릿으로 제조하고 물성을 분석하였다. 분석결과, 유해물질은 검출되지 않았으며, Homo-PP와 유사한 결과를 보였다. 따라서 재생 PP로 충분한 기능성이 존재하는 것을 확인하였다. 다만, 어두운 색상으로 인해 검정 혹은 어두운 계열의 제품군에 한정적으로 적용 가능할 것으로 평가되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.