• 한국건설순환자원학회논문집
• /
• 제7권2호
• /
• pp.116-122
• /
• 2019

본 연구는 석탄가스화 용융슬래그(이하 CGS)를 콘크리트용 잔골재로의 활용성을 검토하기 위한 기초 단계로 시멘트 모르타르 조건에서 CGS 치환율에 따른 특성을 평가하였는데, 그 결과를 요약하면 다음과 같다. 플로는 양호한 품질의 부순 잔골재(이하 CSa) 및 불량 입도의 부순 잔골재와 해사를 혼합한 잔골재(이하 CSb+SS) 공히 CGS 치환율이 증가할수록 증가하였으나, 공기량은 반대의 경향으로 감소하였다. 압축강도는 CGS 치환율이 증가할수록 포물선의 경향을 보였으며, 재령 28일을 기준으로 CSa를 사용한 경우는 CGS 50%, CSb+SS를 사용한 경우는 CGS 75%에서 가장 높은 강도값을 나타내었다. 휨강도는 CGS 25% 및 50%에서 최대치를 나타냈으나 전반적으로는 압축강도와 유사한 경향으로 나타났다. 상호비교로서 CSb+SS와 대비하여 CSa에서 압축강도 및 휨강도가 약 5% 정도 높게 나타났으며, CGS 사용 유무에 따라서는 CGS를 사용하였을 때 높은 강도일수록 크게 나타났다. CGS 치환율에 따른 모르타르의 품질을 종합적으로 검토한 결과, CGS를 잔골재에 50% 전후로 혼합하여 사용한다면 유동성 확보 및 강도증진에 긍정적으로 기여하여 자원 재활용 및 품질향상을 동시에 도모할 수 있을 것으로 사료된다.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.141-147
• /
• 2005

The development of automobile, vessel, rail road, and machine industry leads an increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 700,000 tons a year, but most WFS has been buried itself and only $5{\~}6\%$ WFS is recycled as construction materials. Therefore, it is necessary for most WFS to research other ways which can be used in a higher value added product. The study on recycling it as a fine aggregate for concrete or green sand has been in progress in America and Japan since 1970s and 1980s respaectively. In this study, two types of WFS were used as a fine aggregate for concrete. Nine types of concrete aimed at the specified strength of 30 MPa were mixed with washed seashore coarse sand in which salt was removed, and WFS and then appropriate mixture proportion of concrete was determined. Moreover, basic properties such as air contents, setting time, bleeding, workability and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• 청정기술
• /
• 제12권4호
• /
• pp.238-243
• /
• 2006

본 연구에서는 용융 전로슬래그를 고속의 공기를 이용하여 급랭한 전로슬래그의 골제 특성을 조사하고 이를 잔골재로 재활용한 모르타르의 특성을 분석하였다. 급랭전로슬래그의 입자형태는 구형이었으며 냉각 속도의 차이로 인해 표면층과 내부층 그리고 외부와 연결된 공동을 가지고 있었다. 표준사를 구형 급랭전로슬래그로 대체한 혼합 잔골재의 특성을 분석한 결과 대체 비율이 증가하면서 비중, 단위용적중량 그리고 조립율이 증가하였으며 실적률은 대체 비율 75%에서 최대를 나타내었다. 흡수율은 대체 비율 50%에서 최소값을 보였다. 혼합 잔골재의 구형 급랭전로슬래그 대체 비율이 증가할수록 굳지 않은 모르타르의 유동성이 증가하여 동일한 플로우값을 얻기 위한 물/시멘트 비는 감소하였다. 구형 급랭전로슬래그 대체 비율이 증가할수록 양생한 모르타르 시편의 조직은 치밀하였으며 비중은 증가하였다. 압축강도의 경우는 대체율 75%에서 최대값을 보였다.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.537-546
• /
• 2020

Exterior walls in buildings are exposed to various forms of thermal loads, which depend on the positions of walls. Therefore, one of the efficient methods for improving the energy competence of buildings is improving the thermal properties of insulation plaster mortar. In this study, lightweight fine aggregate (LWFA) and micro rubber ash (MRA) from recycled tires were used as partial replacements for sand. The flow ability, unit weight, compressive strength, tensile strength, thermal conductivity (K-value), drying shrinkage and microstructure scan of lightweight rubberized mortar (LWRM) were investigated. Ten mixtures of LWRM were prepared as follows: traditional cement mortar (control mixture); three mixes with different percentages of LWFA (25%, 50% and 75%); three mixes with different percentages of MRA (2.5%, 5% and 7.5%); and three mixes consisting both types with determined ratios (25% LWFA+5% MRA, 50% LWFA+5% MRA and 75% LWFA+5% MRA). The flow ability of the mortars was 22±2 cm, and LWRM contained LWFA and MRA. The compressive and tensile strength decreased by approximately 64% and 57%, respectively, when 75% LWFA was used compared with those when the control mix was used. The compressive and tensile strength decreased when 5% MRA was used. By contrast, mixes with determined ratios of LWFA and MRA affected reduced unit weight, K-value and dry shrinkage.

• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.282-288
• /
• 2023

본 연구에서는 신규 건설된 특수개질 아스팔트 포장체와 기존 도로로써 일반 아스팔트 포장체의 도로변 미세먼지의 발생량을 분석하였다. 충청남도 지자체로써 차량 통행이 높은 C 도시의 고속버스터미널과 상업 시설 지역에 위치한 도로변에서 2022년과 2023년 하절기 동안 3일 간격으로 1,000 g(100 g/day)의 먼지 샘플을 채집하였다. 채집된 먼지 샘플은 크기와 밀도 분리를 통해 75-150 ㎛ 범위의 미세먼지 및 타이어와 도로 마모입자로 전처리하여 분리하였다. 기존 도로로써 일반 아스팔트 포장체 구간인 No.1-3 구역의 미세먼지 및 타이어와 도로 마모입자의 평균은 각각 24.27 g과 24.36 g 및 0.53 g과 0.53 g으로, 2022년과 2023년의 미세먼지 발생량 데이터를 비교할 때 정량적 결과가 유사하게 분석되었다. 신규 건설된 특수개질 아스팔 트 포장체 구간인 No.4-6 구역은 2022년 분석 결과와 비교할 때 2023년 미세먼지는 14.8 %, 타이어와 도로 마모입자는 29.6 % 감소되었다. 또한, 열중량분석 결과에 의하면, No.1-3 구역의 타이어와 도로 마모입자는 타이어와 도로 성분이 각각 30 %와 70 %로 분석되었다. 그러나, No.4-6 구역의 2023년에는 타이어와 도로 성분이 각각 35 %와 65 % 분석되었다. 이러한 결과로부터 신규 건설된 특수개질 아스팔트 포장체에서 도로변 미세먼지 및 타이어와 도로 마모입자 발생을 낮출 수 있는 미세먼지 저감 효과를 확인 할 수 있었다. 그러나, 다양한 환경 및 기후적 변수를 고려한 공간적 제약 및 샘플 수집 기간의 한계로부터 추후 지속적인 연계성을 확보한 연구가 필요하다고 판단된다. 따라서, 향후에는 미세먼지를 저감할 수 있는 아스팔트 포장체의 기술적 접근과 도심지 도로변에서 발생되는 미세먼지 및 타이어와 도로 마모입자의 정량적 분석에 대한 다양한 사례 연구를 진행할 계획이다.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.54-60
• /
• 2014

The purpose of this study is to examine whether cementitious powder separated from waste concrete can be used as an alternative raw material to limestone and reduce the usage of natural resource (limestone) and $CO_2$ emission based on recycling cementitious powder from waste concrete. Experiments actually analyzed the chemical composition of cementitious powder and performed hyperthermia analysis, measurement of free CaO and XRD analysis to measure the degree of recovery of hydration in the model of cementitious powder manufactured based on chemical composition. These were performed in each cementitious powder model at different calcination temperatures such as $900^{\circ}C$, $1200^{\circ}C$, $1300^{\circ}C$, $1400^{\circ}C$ and $1450^{\circ}C$. Through the experiments, it was found that the recovery of hydration was at a level which can be used as the alternative raw material for limestone, but the replacement ratio was directly affected by the degree of mixing of fine aggregate in less than $150{\mu}m$, which cannot be separated from cementitious powder. It was shown that there was no difference in the production of compounds involved in hydration at calcination temperatures of $1200^{\circ}C$ or higher. Therefore, to pursue the replacement of limestone and reduction of greenhouse gas by recycling cementitious powder, the development of technology to efficiently separate aggregate fine powder is required.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.29-34
• /
• 2001

석탄회 분말을 다중자연낙하법에 의한 공기분급에 의하여 미립 및 조립의 분말로 정제 및 분급한 후 각각의 분말을 사용하여 뮬라이트 및 제올라이트를 합성하였다 평균 입경이 $6.5mu$m인 미립 석탄회에$ A12$ $O_3$를 첨가한 후 145$0^{\circ}C$ 이상의 온도에서 소성하여 뮬라이트 상의 소결체를 얻었다. 평균 입경 $56.3\mu$m인 조립 석탄회를 사용하여 3.5 M NaOH수용액과 $120^{\circ}C$에서 수열 반응시켜 phillipsite형 제올라이트를 합성하였다. 이와 같은 방법으로 모든 입도의 석탄회 분말을 무기재료의 합성에 이용할 수 있었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.279-284
• /
• 2009

Traditionally, so-called "industrial waste gases", such ad exhaust from boilers at industrial installations and a large quantity of soot discharged from power station, before their release into the atmosphere, have been on occasion subjected to an air cleaning process to remove fine particles that may pollute the atmosphere (such as mist and dust containing various powdery or oily substances and moisture from industrial waste gases). The release of industrial waste gases containing these particles directly into the atmosphere poses a serious threat to the earth environment; and recovery of these noxious substances is required by law in some countries and local governments. in urban areas, air pollution from automobile exhaust and others creates a serious condition. Some homes are equipped with and use indoor air purifiers. In many of the kitchens of restaurants, smoke generated during cooking and otherwise contaminated air are cleansed by air purifiers before being released outside or recycled inside. For the dust collecting devices to recover the fine particles contained in contaminated air, the cause for air pollution and how to purify air, many types based on various principles are known. Specifically, classified based on theories of particle collection, filtration, gravity, inertia, centrifugation, electricity, and cleaning types are cited as available processes. Among them, an appropriate type is selected according to the size or type of fine particles to be collected and conditions for installation. For the efficiency of dust collection, a filtration system (by using bag filters and others) and electric system are particularly outstanding and are therefore used widely in various areas of industry. In this research, rotary type high performance oil mist and smoke collecting system with self auto cleaning device equipped with the cleaning fluid spraying section is investigated.