• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.59-67
• /
• 2016

This paper proposes a model-prediction-based collision-avoidance algorithm for excavators for which the recursive-least-squares (RLS) estimation of the excavator's rotational inertia is used. To estimate the rotational inertia of the excavator, the RLS estimation with multiple forgetting and two updating rules for the nominal parameter and the forgetting factors was conducted based on the excavator-swing dynamics. The average value of the estimated rotational inertia that is for the minimizing effects of the estimation error was computed using the recursive-average method with forgetting. Based on the swing dynamics, the computed average of the rotational inertia, the damping coefficient for braking, and the excavator's braking angle were predicted, and the predicted braking angle was compared with the detected-object angle for a safety evaluation. The safety level defined in this study consists of the three levels safe, warning, and emergency braking. The analytical rotational-inertia-based performance evaluation of the designed estimation algorithm was conducted using a typical working scenario. The results of the safety evaluation show that the predictive safety-evaluation algorithm of the proposed model can evaluate the safety level of the excavator during its operation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.169-173
• /
• 2012

This paper investigates the performance of Turbo equalization in wireless multipath channels. Turbo equalization mainly consists of a SISO(soft-in soft-out) equalizer and a SISO decoder. Iterative channel estimators can improve the accuracy of channel estimates by soft information fed back from the SISO decoder. Comparing iterative channel estimators with LMS(least mean square) and RLS(recursive least squares) algorithms, which are the most common algorithms to estimate and track a time-varying channel impulse response, the iterative channel estimator with RLS converges more faster than the one with LMS. However, the difference of BER(bit error rate) performances gradually decreases as the number of iterations for Turbo equalization increases.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.312-315
• /
• 2007

운전자의 변의와 안전을 위한 장치로 센서를 차량에 많이 부착하게 되었다. 레이더도 그런 센서 중의 하나로 다른 센서들 보다 정확하게 주변상황을 인식하게 해 준다. 하지만 그런 레이더 데이터에는 차량의 정보들 뿐만 아니라 주변의 장애물, 건물 동의 원하지 않는 데이터가 같이 들어 오며 이런 물체들은 뒤에 있는 물체들을 가리기 까지 한다. 이 논문에서는 RLS(Recursive Least Square)를 사용하여 이런 가려지는 물체들의 데이터들을 버리지 않고 사용할 수 있는 알고리즘을 제안한다.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.54-60
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square(RLS) modeling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for the on-line system identification and monitoring of an end-milling for this purpose. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF(Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.984-990
• /
• 2013

This paper develops a new Intelligent Electronic Device (IED), and then presents an application method of a monthly load forecasting algorithm on the smart IEDs. A Multiple Linear Regression (MLR) model implemented with Recursive Least Square (RLS) estimation is established in the algorithm. Case Study proves the accuracy and reliability of this algorithm and demonstrates the practical meanings through designed screens. The application method shows the general way to make use of IED's smart characteristics and thereby reveals a broad prospect of smart function realization in application.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.87-93
• /
• 2005

A new method for real-time estimating left ventricular relaxation time constant (T) from the left ventricular (LV) pressure waveform, based on the isovolumic relaxation model, is proposed. The presented method uses a recursive least squares (RLS) algorithm to accomplish real-time estimation. A new criterion to detect the end-point of the isovolumic relaxation period (IRP) for the estimation of T is also introduced, which is based on the pattern analysis of mean square errors between the original and reconstructed pressure waveforms. We have verified the performance of the new method in over 4,600 beats obtained from 70 patients. The results demonstrate that the proposed method provides more stable and reliable estimation of τ than the conventional 'off-line' methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.965-969
• /
• 1993

In this paper, the GPC algorithm is developed for ACS(advanced control system). ACS equals to DCS(distributed control system) with some advanced control algorithm, for example, fuzzy logic controller, autotuning. By its embedded structural control language, which uses simple function codes corresponding to each function blocks, it is possible to construct multiloop controller. The developed GPC function code is divided by RLS (recursive least square) parameter estimator and GPC controller. Simulation result show the availability of GPC function code using the control language.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.754-759
• /
• 1993

An adaptive model predictive control (AMPC) strategy using auto-regression moving-average (ARMA) models is presented. The characteristic features of this methodology are the small computer memory requirement, high computational speed, robustness, and easy handling of nonlinear and time varying MIMO systems. Since the process dynamic behaviors are expressed by ARMA models, the model parameter adaptation is simple and fast to converge. The recursive least square (RLS) method with exponential forgetting is used to trace the process model parameters assuming the process is slowly time varying. The control performance of the AMPC is verified by both comparative simulation and experimental studies on distillation column control.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.546-549
• /
• 2002

In this paper, a simulation system, which is almost same with the real motor-mechanical control system, is established. The real system is identified by using the data from DSP(TMS320F240). The RLS(Recursive Least Square) algorithm is used for the identification and MATLAB Simulink program is used for simulation. The exact simulation system obtained by using the proposed method is very useful for analysis and design of motor-mechanical control systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.371-376
• /
• 1994

This paper presents an on-line modeling method approach for the machine condition. the machine condition is continuously monitored with a sensor such as, a vibration, a current, an acoustic emission (AE) sensor. In this study, neural network modeling by radial basis function is designed for analysis a prediction error. An on-line learning algorithm is designed using the RLS(recursive least square) estimation and the existing clustering method of Kohonen neural network. Experimental results show that the proposed RBNN modeling is suitable for predicting simulated data.