• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.232-236
• /
• 2000

In this paper a novel estimation algorithm of mechanical parameters in two-mass system is proposed. The inertia of a load and a motor and the stiffness are estimated by using RLS (Recursive Least Square) algorithm and acceleration information of motor. The effectiveness of the proposed scheme is verified with simulation and experiments results.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.435-439
• /
• 2007

This paper deals with RLS algorithm using Newton-Raphson method based adaptive forgetting factor for a passive telemetry RF sensor system in order to estimate the time variant parameter to be included in RF sensor model. For this estimation with RLS algorithm, phasor typed RF sensor system modelled with inductive coupling principle is used. Instead of applying constant forgetting factor to estimate time variant parameter, the adaptive forgetting factor based on Newton-Raphson method is applied to RLS algorithm without constant forgetting factor to be determined intuitively. Finally, we provide numerical examples to evaluate the feasibility and generality of the proposed method in this paper.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2007

This paper presents a PID automatic gain-tuning algorithm for the electronic throttle valve which is driven by wire. Since the system characteristics of position control for electronic throttle valve are so complicated that both the real time robustness and the manufacturing cost must be considered for mass production. To resolve this paradox, a kind of algorithm called RLS (Recursive Least Square) is adopted for the control of the ETB (Electronic Throttle Body). Using this algorithm, the PID gains can be adjusted automatically with the estimated system parameters. Furthermore, a pre-filter is supplemented for the sake of the robustness against the friction and loads. From the industrial requests for the system, the design specifications are decided as follows: the settling time should be less than 1sec and the overshoot should be kept below 3%. The results of the experiments based on this approach show that the high robustness can be achieved while the system stability is satisfied steadily. A parameter estimation scheme and a gain-tuning algorithm have been properly combined and utilized in this research and the effectiveness is verified through the real experiments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.4
• /
• pp.505-510
• /
• 2005

The RPO(randomized policy optimizer) algorithm, which utilizes probabilistic policy for the action selection, is a recently developed tool in the area of reinforcement learning, and has been shown to be very successful in several application problems. In this paper, we propose a modified RPO algorithm, whose critic network is adapted via RLS(Recursive Least Square) algorithm. In order to illustrate the applicability of the modified RPO method, we applied the modified algorithm to Kimura's robot and observed very good performance. We also developed a MATLAB-based animation program, by which the effectiveness of the training algorithms on the acceleration or the robot movement were observed.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.760-762
• /
• 1999

본 논문에서는 기존의 적응필터인 LMS(Least Mean Square)와 RLS(Recursive Least Square)의 수렴속도의 향상과 안정성을 개선하기 위한 방안을 제안하였다. 제안된 알고리즘은 기존의 시간영역 LMS 알고리즘보다 상당히 빠른 수렴속도를 보일 수 있도록 설계하였다. RLS 알고리즘는 역행렬연산으로 인한 연산량이 많고 자기상관행렬이 positive definite 특성을 잃어버릴 경우 시스템이 수치적으로 불안정하게 되어 발산하는 단점이 있다. 이런한 단점을 보완하기 위해 제안된 알고리즘을 사용하였다. 기존의 알고리즘은 전력 정규화 과정에서 입력신호의 변환이 백색화가 완전히 이루어지지 않게 되어 자기상관행렬이 순수한 대각행렬이 되지 않는 단점을 지니고 있으나, 본 연구에서는 이러한 대각화 과정에서 좀더 많은 정보를 포함하도록 설계하였다. 아울러 제안된 알고리즘을 적응 등화기에 적용하여 수렴속도가 개선됨을 검증하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2012

The accurate information of mass properties is required for the precise control of the spacecraft. The mass properties, mass and inertia, are changeable by some reasons such as consumption of propellant, deployment of solar panel, sloshing, environmental effect, etc. The gyro-based attitude data including noise and bias reduces the control accuracy so it needs to be compensated for improvement. This paper introduces a real-time inertia estimation method for the attitude determination of STSAT-3, Korea Science Technology Satellite. In this method we first filter the gyro noise with the Extended Kalman Filter(EKF), and then estimate the moment of inertia by using the filtered data from the EKF based on the Recursive Least Square(RLS).

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.492-501
• /
• 2018

In the rotor-flux oriented control used in induction motors, the electrical parameters of the motors should be identified. Among these parameters, the mutual inductance and rotor resistance should be accurately tuned for better operations. However, they are more difficult to identify than the stator resistance and stator transient inductance. The rotor resistance and mutual inductance can change in operations due to flux saturation and heat generation. When detuning of these parameters occurs, the performance of the control is degenerated. In this paper, a novel method for the concurrent identification of the two parameters is proposed based on recursive least square estimation and model reference adaptive control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1234-1238
• /
• 2004

A Controlled neural networks are proposed in order to measure nonlinear environments in adaptive and in realtime. The structure of it is similar to recurrent neural networks: a delayed output as the input and a delayed error between tile output of plant and neural networks as a bias input. In addition, we compute the desired value of hidden layer by an optimal method instead of transfering desired values by backpropagation and each weights are updated by RLS(Recursive Least Square). Consequently, this neural networks are not sensitive to initial weights and a learning rate, and have a faster convergence rate than conventional neural networks. This new neural networks is Error Estimated Neural Networks. We can estimate nonlinear models in realtime by the proposed networks and control nonlinear models. To show the performance of this one, we have various experiments. And this controller call prove effectively to be control in the environments of various systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.525-526
• /
• 2008

For measuring nonlinear Vehicle Modeling based on 7-Depth Sensor, the neural networks are proposed m adaptive and in realtime. The structure of it is similar to recurrent neural networks; a delayed output as the input and a delayed error between the output of plant and neural networks as a bias input. In addition, we compute the desired value of hidden layer by an optimal method instead of transfering desired values by backpropagation and each weights are updated by RLS(Recursive Least Square). Consequently, this neural networks are not sensitive to initial weights and a learning rate, and have a faster convergence rate than conventional neural networks. This new neural networks is Error Estimated Neural Networks. We can estimate nonlinear models in realtime by the proposed networks and control nonlinear models.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.234-237
• /
• 2005

강화학습을 위한 많은 방법 중 정책 반복을 이용한 actor-critic 학습 방법이 많은 적용 사례를 통해서 그 가능성을 인정받고 있다. Actor-critic 학습 방법은 제어입력 선택 전략을 위한 actor 학습과 가치 함수 근사를 위한 critic 학습이 필요하다. 본 논문은 critic의 학습을 위해 빠른 수렴성을 보장하는 RLS(recursive least square)를 사용하고, actor의 학습을 위해 정책의 기울기(policy gradient)를 이용하는 새로운 알고리즘을 제안하였다. 그리고 이를 실험적으로 확인하여 제안한 논문의 성능을 확인해 보았다.