• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.1
• /
• pp.1-7
• /
• 1993

The radiation characteristics of a phased array antenna consisted of rectangular waveguides with a slant grid are investigated here. In particular, the effects of the slant angle on the radiation patterns are calculated by solving numerically the integral equation to the electric field over the waveguide aperture in view of the modal analysis. And it is found that the blindness on the radiation pattern can be moved by inserting a dielectric plug or sheath properly.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.65-67
• /
• 2002

An approximate, numerically-efficient solution for a microstrip T-junction is discussed. The microstrip T-junction is modeled as a rectangular waveguide with top/bottom electric walls and side magnetic walls. Comparisons of our solution with others show favorable agreements.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.56-65
• /
• 1989

In this paper, a new model is presented which characterizs the coupling of the radiating edges between two rectangular microstrip patch antennas. This model, namely Radiating Edges-Coupling (REC) model, is derived from the equivalent circuit of the slitted parallel-plate waveguide filled with homogeneous dielectric. Applying the REC model to two coupled rectangular microstrip patch antennas, we obtain numerical S-parameter values of |$S_{11}$| and |$S_{12}$|for the various coupling separations, $S_e$=0.5, 1.0, 1.5, and 2.0mm. Theoretical results are in fairly good agreement with experimental results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.29-37
• /
• 1974

Theoretical analysis is carried out for the curtoff wavelength characteristics of rectangular waveguide containing a step-ridge. In order to obtain the cutoff wavelength of step-rigde waveguide, an transmission matriz is formulated by the method of equivalent transverse resonance. The characteristic equation, in which the wavelength is obtainable by the numerical method, is derived from the equation. An approximate determination of the dominant mode fields in step-ridge waveguides at all frequencies has been made. Using these fields, the characteristic impedance equation is derived from power considerations. Analyzing the results of the calculations, the following characteristics are noted. The values of λ /a of TE10 mode increase with decreasing gap lengths and with increasing step width S or S , or both. Experimental results of cutoff characteristics are in good agreement with the theoretical analusis. It is shown that a waveguide within which a step-ridge is placed has a lower cutoff frequency and impedance than empty guide without it. Therefore, the role of a step-ridge guide is to broadening the bandwidth 2 to 3 times more than that of an empty guide of the same demension.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.360-370
• /
• 2015

In case that an infinite length waveguide structure is connected with a finite length structure, it is required to combine a wave approach for the waveguide structure and a modal approach for the finite length structure to investigate the dynamic response of the connected target structure. In this study, the wavenumber finite element (WFE) analysis is adopted for the infinite length waveguide substructure and a finite element (FE) method is applied for the finite length substructure and then their results are coupled in terms of the impedance or mobility at the connected points between the substructures. As a structural model, an infinite length cylindrical shell with a rectangular plate inside is regarded. These two substructures are connected at the four corner points of the plate, rigidly or resiliently. From this investigation, it was confirmed that the wave approach (WFE method) and modal approach (FE method) can be combined by the impedance coupling.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.91-96
• /
• 2018

In this paper, dual axes waveguide rotary joint, which operates at high power and has low loss characteristic, is designed and fabricated for a Ka-band millimeter-wave small radar. Its electrical performance is verified through the S-parameter at room temperature, high power and operation temperature test. Rotary joint functionally consists of the mode converter transforming rectangular waveguide into circular waveguide and the choke at the rotation part. At the configuration design, linking a fixed transmitter to an antenna rotating dual axes electrically for minimum loss and light weight body are considered. In Fc(center frequency)${\pm}500MHz$, the designed rotary joint has VSWR 1.5:1 below return loss, -2.0 dB above insertion loss. It is found that rotary joint characteristics is similar to design results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.586-594
• /
• 2013

This paper proposes a new coupling element of microwave slot coupler for designing waveguide slot array which can reduce the effect of undesired higher order mode coupling between coupling and radiating slots in the branch waveguide. The proposed device is composed of a centered longitudinal shunt-series coupling slot at the center of broad wall shared by two crossed rectangular waveguides and an asymmetric compound iris that excites the coupling slot. We first have obtained scattering parameters for the proposed coupler by use of EM S/W tool HFSS and then extracted the parameters of T- network equivalent circuit for the coupling slot. We also have analyzed the resonant properties such as resonant length and normalized admittance by changing the geometrical dimensions. The measured results for the fabricated coupler with short-circuited block ${\lambda}_g/4$ away from the coupling slot are well agreed with the simulated ones.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.299-304
• /
• 2011

In this paper, the circular polarized horn antenna composed of circular polarizer and impedance transformer is designed, and fabricated. For the circular polarizer, two types of the polarizer are designed and the electrical performance of them is compared; rectangular waveguide polarizer with $45^{\circ}$-inclined dielectric slab and oval shaped one. Straight type mode converter has a stepped impedance structure and plays a role of converting waveguide TE mode into coaxial TEM mode, and the proposed antenna is designed to directly connect with active components using the feed-through in the input port of the mode converter. Fabricated antenna has the wideband performance, VSWR<1.5 and Axial ratio < 1.0dB, ranging from 30.085 to 30.885 GHz, and the antenna gain is 6.7~7.0 dBi.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.569-571
• /
• 2007

In this paper, hem antenna composed of rectangular hern, circular polarizer and straight-type mode convertor is designed and fabricated. The circular polarizer is designed as a dielectric type having broadband characteristic, and it is inserted into the rectangular hem with $45^{\circ}$ inclination. The straight-type mode convertor has a terrace-type structure in order to convert the TEM mode signal of coaxial cable to the TE mode of rectangular waveguide, and this structure minimizes conversion loss. Fabricated hem antenna operates at $30.085\sim30.885GHz$ and has VSWR < 1.5, Axial ratio < 1.0dB and antenna gain of $6.7\sim7.0dBi$ in the band.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.17-23
• /
• 2008

We have investigated the properties of the novel rectangular ring lasers containing active and passive regions in a InP material system. The rectangular ring laser consists of four low loss total internal reflection mirrors and a directional coupler made out of passive three waveguide. Two different lasers haying active lengths of 250 and $350{\mu}m$ and total cavity lengths of 580 and $780{\mu}m$ are fabricated, respectively. For both devices lasing thresholds of 38 mA is obtained at room temperature and under continuous wave operation. Lasing is predominantly single mode with the side mode suppression ratio better than 20 dB.