• 한국항행학회논문지
• /
• 제27권3호
• /
• pp.281-286
• /
• 2023

본 논문은 고정위성업무(FSS; Fixed-Satellite Service) 및 방송위성업무(BSS; Broadcasting-Satellite Service)의 다운링크 대역을 통합하는 Ku 대역의 위성통신용 광대역 혼합 패치 배열 안테나의 설계에 관한 것으로써, 제안한 안테나는 FR4 기판 상에 사각 패치를 6 x 2 형태로 배열하여 구현되었다. FSS 다운링크 대역(10.7~10.95 GHz, 11.2~11.45 GHz) 및 BSS 다운링크 대역(11.7~12.5 GHz, 12.2~12.75 GHz, 11.7~12.2 GHz)을 모두 포함하는 광대역(10.7~12.75 GHz) 안테나를 설계하기 위해 11.5 GHz 및 12.5 GHz에서 동작하는 사각 패치를 각각 교대로 배열하였고 이를 통해 중심주파수의 30.8%에 해당하는 광대역을 확보하였다. 안테나의 성능을 확인하기 위해 제안한 안테나를 제작 및 측정하였고 모의시험 결과와 유사함을 확인하였으며 따라서 제안된 안테나는 FSS 및 BSS 다운링크를 위한 안테나로 적용이 가능하다.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1825-1838
• /
• 2016

The detection of skin pigment is crucial in the diagnosis of skin diseases and in the evaluation of medical cosmetics and hairdressing. Accuracy in the detection is a basis for the prompt cure of skin diseases. This study presents a method to recognize and measure human skin pigment using Hemoglobin-Melanin (HM) coordinate. The proposed method extracts the skin area through a Gaussian skin-color model estimated from statistical analysis and decomposes the skin area into two pigments of hemoglobin and melanin using an Independent Component Analysis (ICA) algorithm. Then, we divide the two-dimensional (2D) HM coordinate into rectangular bins and compute the location histograms of hemoglobin and melanin for all the bins. We label the skin pigment of hemoglobin, melanin, and normal skin on all bins according to the Bayesian classifier. These bin-based HM projective histograms can quantify the skin pigment and compute the standard deviation on the total quantification of skin pigments surrounding normal skin. We tested our scheme using images taken under different illumination conditions. Several cosmetic coverings were used to test the performance of the proposed method. The experimental results show that the proposed method can detect skin pigments with more accuracy and evaluate cosmetic covering effects more effectively than conventional methods.

• 한국수산과학회지
• /
• 제53권4호
• /
• pp.637-649
• /
• 2020

An ideal 3D primitive equation model is implemented to investigate upper ocean response to typhoons, focusing on rightward bias (RWB) which means an appearance of an intensified sea surface cooling to the right side of the typhoon track. The model has 26-stratified levels and a flat bottom (1000 m), covering a rectangular domain of about 3,060 km×3,300 km with four open boundaries. The sea water is forced by an atmospheric pressure and a gradient wind of the typhoon. The model well reproduces the RWB in previous observations and theoretical analyses. For the fast moving typhoon (FMT) (-8m/sec), the model shows that in the mixed layer (ML), the RWB in the SST noticeably appears clearly illustrating the coupling between inertial motion and wind stress, but in the subsurface layer (-100m), the RWB does not emerge since a cyclonic current field (CCF) caused by wind stress curl is primarily dominant. For the slowly moving typhoon (SMT) (-3m/sec), however, the RWB does not emerge because the coupling is weakened and the CCF is rather predominant even in the ML. In the model, we conclude that the RWB noticeably emerges in the FMT but does not emerge in the SMT related to predominance of CCF.

• Earthquakes and Structures
• /
• 제10권6호
• /
• pp.1429-1449
• /
• 2016

The effect of porosity on bending and free vibration behavior of simply supported functionally graded plate reposed on the Winkler-Pasternak foundation is investigated analytically in the present paper. The modified rule of mixture covering porosity phases is used to describe and approximate material properties of the FGM plates with porosity phases. The effect due to transverse shear is included by using a new refined shear deformation theory. The number of unknown functions involved in the present theory is only four as against five or more in case of other shear deformation theories. The Poisson ratio is held constant. Based on the sinusoidal shear deformation theory, the position of neutral surface is determined and the equation of motion for FG rectangular plates resting on elastic foundation based on neutral surface is obtained through the minimum total potential energy and Hamilton's principle. The convergence of the method is demonstrated and to validate the results, comparisons are made with the available solutions for both isotropic and functionally graded material (FGM). The effect of porosity volume fraction on Al/Al2O3 and Ti-6Al-4V/Aluminum oxide plates are presented in graphical forms. The roles played by the constituent volume fraction index, the foundation stiffness parameters and the geometry of the plate is also studied.

• 대한전자공학회논문지
• /
• 제10권5호
• /
• pp.31-38
• /
• 1973

잔향시간은 이론적으로 게산하는데는 아직까지 기하음향학이론인 Sabine 의식을 사용하고 있다. 이것은 파동학이론으로 분석할때 한개의 측에 대한 정재파의 잔향시간과 같다. 잔향시간은 정재파기 영향을 크게 받으며 이것을 각 mode에 의한 주파수관계를 계산하여 측파, 사영파 그리고 oblique wave를 산출하였다. 이것은 간단한 구형교실을 model로 하였다. 따라서 감쇄곡선은 스펙토로그라프에 의하여 축파 및 사영파가 oblique wave 보다 잔향시간에 더큰 영향을 준다는 결과를 얻었다. 이것은 잔향시간을 조정하는데 큰도움을 줄것이다.

• 한국항행학회논문지
• /
• 제24권3호
• /
• pp.232-237
• /
• 2020

본 논문에서는 GPS 대역과 휴대용 기기에 적용을 위한 마이크로스트립 급전 이중대역 평면형 안테나를 제안하였다. 이중 대역 특성을 얻기 위하여 개방 L-형 슬롯과 구부러진 사각형 슬롯이 사용된다. 제안된 안테나는 유전상수(𝜖_r)가 4.3, 두께가 1.6 mm, 크기가 57 × 57 ㎟ 인 FR4 기판에 설계 및 제작 되었다. 제안된 안테나의 제작 및 측정 결과 임피던스 대역폭(|S₁₁|≤ -10dB)이 GPS 대역에서 60 MHz (1550 ~ 1610 MHz), DCS / IMT-2000 대역에서 670 MHz (1690 ~ 2360 MHz)로 GPS와 DCS / IMT-2000 대역을 충분하게 만족한다. 또한, 사용하고자 하는 대역에서 안정되고 우수한 무지향성 방사패턴을 얻을 수 있었으며, 2.36 dBi 이상의 높은 이득과 90% 이상의 효율을 얻을 수 있었다.

• 한국전자통신학회논문지
• /
• 제10권10호
• /
• pp.1189-1196
• /
• 2015

본 논문에서는 GPS/WiMAX/WLAN 시스템에 적용 가능한 다중밴드 대역을 갖는 모노폴 안테나를 설계, 제작 및 측정 하였다. 제안된 안테나는 마이크로스트립 급전을 바탕으로 두 개의 사각 링과 한 쌍의 L 선로로 구성되어 삼중 대역의 특성을 갖도록 설계하였다. 최적화된 수치를 얻기 위해 상용 툴인 HFSS을 사용하여 시뮬레이션을 수행하였다. 제안된 안테나는 $27.0{\times}54.0{\times}1.0mm3$의 크기로 유전율 4.4인 RF 4 기판 위에 제작되었다. 제작 결과, 제안된 안테나는 -10dB 임피던스 대역폭을 기준으로 300 MHz(1.325~1.625 GHz), 400 MHz (2.275~2.675 GHz), 그리고 600 MHz (3.15~3.75 GHz)의 대역폭을 얻었다. 또한 제안된 안테나는 요구되는 3개 대역에서 측정된 이득과 방사패턴의 특성을 얻었다.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.777-781
• /
• 2005

Syndactyly and polysyndactyly are one of the most common congenital anomalies of upper limb. Although there are many surgical approaches, most of them require skin graft for covering the raw surfaces. Therefore these methods involve many disadvantages such as grafted skin contracture, web recurrence, skin graft loss and long operation time, and the grafted hyperpigmented skin and donor site of skin graft, which lead to poor results aesthetically. The authors treated seven cases with a Hayashi's new method in four patients. In this method, tissue of interdigital space are regarded as forming 4 facets of a two piled cube. A dorsal rectangular flap on dorsum of interdigital web makes a new interdigital space. One side of divided digit is coverd with lateral based plantar flap and the other side of divided digit is covered with subcutaneous pedicled flap and remnant web skin. The authors could obtain natural deep interdigital space without web recurrence and scar contracture in 7 cases. Moreover this method does not require skin grafting, accordingly produces better aesthetic results without hyperpigmentation and donor site scaring. Therefore we report this operation technique, which might be used as one of the standard in surgical correction of syndactyly and polysyndactyly.

• 동굴
• /
• 제68호
• /
• pp.5-22
• /
• 2005

Since earlier in 1947 the writer had been devoting part of his time to study alluvial fans in Korea based on his own interest in geomorphology. However, it was in 1958 when a new geography department was set up and the Research Center of National Lands was established in the university of Kyung Hee, the writer started scientific investigation for alluvial fans. The Following alluvial fans have been studied by the writer: those of Mt. Kwanak and Mt. Chungge in 1947; those of Pulkuksa in 1948; those of Suhnamsa, Suh Myun, Pusan in 1950; those of Shindonae, Mt. Kerrong, in summer of 1958; those of Hwaomsa, Kure and Yongsan Myun, Changhung, in winter of 1958. The article is the comparative study of the above mentioned alluvial fans including Suhkwangsa Fan, Chugaryng Rift Valley. Of course this is not the study covering all af alluvial fans in Korea. Within the limits of his surbey, the writer has com to a conclusion which may be helpful for the Korean alluvial fm study. 1. Korean alluvial fans are generally found in rift valleys or basins. 2. They are formed in places of below 220-meter contour line. 3. The slope from fna apex to river valley is 20-40 degree. The slope of fan surface is 5-20 degree, but most of them under 16 degree. A sudden change of slope is taken place or the fan apex and fan center. 4. Hills (100-200m) are developed on the surfaces of alluvial fans. 5. Most of rivers in alluvial fans are geyser rivers. 6. The depth of well : from ground surface to the well water surface is 4-8 m; water depth is 1-2m. 7. Land utilization; cultivated land 30%: non cultivatedland 70%. The area occupied by upland fields is twice of paddy field area. 8. Settlement : agglomerated settlement is developed on the top or the end of fan and surrounded by windbreakers. 9. Farming pattern at the top of fan fields are rectangular and parallel to flumes but at the center of fan, they are irregular and perpendicular to flumes.