• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.215-226
• /
• 2015

This study introduced food waste into re-vegetation base materials for surface loss recovery of carry-away highway cut slope. The object of this study is to derive the mixing ratio of food waste by conducting a test installation, monitoring, analysis and evaluation for recovery of carry-away highway cut slope. The following items were investigated and analyzed each experimental zone to draw mixing ratio of re-vegetation base materials and food waste : the physical and chemical properties of the vegetation base materials, soil-hardness, soil-humidity, left out and the collapsed point, established number of trees, species richness of grass species and tree species, coverage, pest status, and invasion of disturbance species. The re-vegetation method was evaluated by each experiment zone which has different mixing ratio. As a result, experiment zone A was rated 45 points out of 60 rating points as the best re-vegetation method. However, this study result has been derived from one construction and short-term monitoring. In order to derive the suitable and dependable mixing ratio, conducting an objective re-vegetation method evaluation and long-term experiment and monitoring is required.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.187-194
• /
• 1985

This field experiment was carried out to determine the effects of thirteen different fertilizer levels of nitrogen(N), phosphorus($P_2O_5$) and potassium($K_2O$) on the content of crude protein, crude fiber, mineral constituents of product and tree growth forest pasture with 40-50% shading. The experiment was arranged as a randomized block design and performed in the suburban forest of Suweon in 1984. The results obtained are summarized as follows: 1. Crude protein content and total protein yield were higher in the plot of 28 and 42kg $N/_{10a}$, regardless of $P_2O_5\;and\;K_2O$ level, while those were the lowest in zero fertilizer and N-zero fertilizer plots. 2. The contents of lignin and silica were significantly low in the high N fertilizer level, and the contents of NDF, ADF, cellulose and hemicellulose were not affected by different fertilizer levels. However, the content of crude fiber tended to be low with high N, regardless of $P_2O_5\;and\;K_2O$. 3. The contents of N,K and $SiO_2$ of grasses were influenced by different fertilizer levels. However, those of P,Ca,Ma and Na showed little differences. 4. The recovery percentage of NPK was higher in the plot of standard fertilizer level with 28-20-24 kg/10a, and higher recovery percentage was observed in $K_2O$, followed by N and $P_2O_5$ in that order. 5. The growth of tree was increased as the level of N fertilizer was increased, but no such trend was noted by $P_2O_5\;and\;K_2O$ levels. 6. Crude protein, crude fiber, some mineral contituents of grasses, and growth of tree were influenced by N level, regardless of $P_2O_5\;and\;K_2O$. And the optimum fertilizer level of $N-P_2O_5-K_2O$ seemed to be 28-20-24 kg/10a for the production of grasses with higher quality and more yield in the forest.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.656-667
• /
• 2003

Congestion control is a key task in reliable multicast along with error control. However, existing tree-based congestion control schemes such as MTCP and TRAMCC are designed for one-to-many reliable multicast and have some drawbacks when they are used for many-to-many reliable multicast. We propose an efficient congestion control mechanism, TMRCC, for tree-based many-to-many reliable multicast protocols. The proposed scheme is based on the congestion windowing mechanism and a rate controller is used in addition. The feedback for error recovery is exploited for congestion control as well to minimize the overhead at the receivers. The ACK timer and the NACK timers are set dynamically reflecting the network condition changes. The rate regulation algorithm in the proposed scheme is designed to help the flows sharing the same link to achieve the fair share quickly The performance of the proposed scheme is evaluated using ns-2. The simulation results show that the proposed scheme outperforms TRAMCC in terms of intra- session fairness and shows good level of responsiveness, TCP-friendliness, and scalability. In addition, we implemented the proposed scheme by integrating with GAM that is one of many-to-many reliable multicast protocols and evaluated the performance in a laboratory-wide testbed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.98-104
• /
• 2004

This paper represents the fast and efficient load transfer guide for fault or outage restoration in distribution system. For restoration guide, system trace is performed to reverse direction(source side) from tie breaker in tree-structured distribution network. Search space and breaker's combinational number for restoration guide are greatly reduced. It is proposed the load transfer method including first stage restoration(single load transfer, double load transfer, triple load transfer), second stage restoration(transferring load to neighboring feeder in order to expand the capacity margin) and load cutoff guide. The proposed method can be easily applied to primary customer restoration, multi-fault recovery and distribution automation system.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.255-260
• /
• 2008

In the recently years, there has been a big interest in ad hoc wireless network as they have tremendous military and commercial potential. An Ad hoc wireless network is composed of mobile computing devices that use having no fixed infrastructure of a multi-hop wireless network formed. So, the fact that limited resource could support the network of robust, simple framework and energy conserving etc. In this paper, we propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. And the ontology clustering adopts a tree structure to enhance resilient against mobility and routing complexity. This proposed multicast routing protocol utilizes node locality to be improve the flexible connectivity and stable mobility on local discovery routing and flooding discovery routing. Also attempts to improve route recovery efficiency and reduce data transmissions of context-awareness. We also provide simulation results to validate the model complexity. We have developed that proposed an algorithm have design multi-hierarchy layered networks to simulate a desired system.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.164-172
• /
• 2009

Recently, 2-dimensional flat light sources have been attracting much attention for its use in LCD backlight applications because of its high luminous efficiency and uniformity. A long-gap discharge, mercury-tree flat fluorescent lamp has been developed, which shows a high brightness ($>5000\;cd/m^2$) and high luminous efficacy (60 lm/W). Additionally, it has a wide operating margin and stable driving condition with the aid of an auxiliary electrode. For driving the lamp, a narrow pulse power to maintain the glow discharge state is required. Since there has been no research for this kind of lamp driving, this paper proposes a newly developed short-pulse, high-voltage lamp-driving scheme. The proposed lamp system uses a ballast with a coupled-inductor in order to raise the short pulse voltage up to the lamp ignition level and to obtain energy-recovery action during the glow discharge mode. The operation principles are presented and also the system performances such as the lighting efficiency, spatial and angular uniformities are evaluated by hardware experiments. The results show that the proposed lighting system is a good candidate for the next-generation of LCD backlight systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1507-1515
• /
• 2008

It is essential for electric power companies to have a quick restoration system of the faulted pole transformers which occupy most of transformers to supply stable electricity. However, it takes too much time to restore it when a transformer is out of order suddenly because we now count on operator in investigating causes of failure and making decision of recovery methods. This paper presents the concept of 'Fault pattern analysis and Restoration prediction model using Data mining techniques’, which is based on accumulated fault record of pole transformers in the past. For this, it also suggests external and internal causes of fault which influence the fault pattern of pole transformers. It is expected that we can reduce not only defects in manufacturing procedure by upgrading quality but also the time of predicting fault patterns and recovering when faults occur by using the result.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.88-91
• /
• 2011

NAND 플래시 메모리는 저전력과 빠른 접근 속도의 특징 때문에 차세대 저장장치로 주목 받고 있다. 특히 플래시 메모리로 만들어진 SSD(solid state disk)는 인터페이스가 기존의 하드디스크와 동일하고 대용량화 되고 있기 때문에 가까운 미래에 다양한 저장시스템의 저장장치로 사용될 것으로 예상된다. 그러나 NAND 플래시메모리 기반 저장장치는 쓰기 전 소거 구조와 같은 독특한 하드웨어 특징을 가지고 있기 때문에 특정 지역에 반복적인 쓰기 요청을 발생하는 B트리를 구축하는 것은 심각한 성능저하를 야기 할 것이다. 이러한 문제를 해결하기 위해 버퍼를 이용하여 B트리 구축 성능을 개선한 방법들이 제안되었다. 그러나 이러한 기법들은 갑작스러운 전원 차단 시 버퍼에 유지하고 있던 데이터를 모두 유실하기 때문에 고장회복을 위한 추가적인 방법이 필요하다. 따라서 본 논문에서는 버퍼를 이용한 방법 중 IBSF기법을 기반으로 NAND 플래시 메모리 기반 저장장치에서 고성능의B트리 구축 방법뿐만 아니라 전원 차단시 효율적인 고장회복을 할 수 있는 기법을 제안한다. 본 논문에서 제안하는 기법은 B트리 변경시 변경 된 정보를 로그에 저장하여 관리한다. 또한 루트노드가 변경될 때 검사점(checkpoint)을 수행한다. 마지막으로 다양한 실험을 통하여 본 논문의 고장회복 성능을 보여준다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.100-107
• /
• 2005

As a result of this study, vitality of natural monuments (large trees) looks relatively good but they require continuous management. Also, the management for condition recovery and condition maintenance, and minimum measures are needed at least to avoid natural calamity. Major points induced are as follows : The first, although most of natural monument large trees showed favorable growth environment, most of them are aged and have dense twigs with requirement for weed trimming to remove complicated and unnecessary branches. In addition, as most of large trees grow alone in a large space with potential natural calamity, thus, minimum measures are required at least. Secondly, change in electric resistance in surveyed large trees was relatively favorable, however, large trees with soil covering showed high electric resistance and were found to have low vitality. As shown, this study was conducted to find out the measurement techniques of natural monuments, Basic foundation is suggested through the measurement of electric resistance, and the vitality of natural monuments; more accurate investigation will be remained for further discussion.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.513-519
• /
• 2003

In order to deliver multicast traffic efficiently, multicast routing and reliable transmission mechanisms are required. The reliable delivery implies that lost packets must be retransmitted, which in turn requires that transmitted packets be stored in a retransmission buffer. Therefore how to manage a retransmission buffer is important and, in this paper, we try to solve the problem of how many packets should be maintained in the buffer. Our proposed scheme, the timer-based buffer management (TBM), maintains only necessary amount of buffer based on the timer value calculated from the NAKs between the replier and receivers on a multicast tree and can adjust to the dynamic network conditions. By performing simulations, we show that TBM manages the buffer efficiently regardless of the error situation, network size, and so on.