• Title/Summary/Keyword: recovery time

Search Result 3,272, Processing Time 0.04 seconds

Experimental und Numerical Sensitivity Analyses on Push Pull Tracer Tests

  • Hwang, Hyeon-Tae;Lee, Gang-Geun
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2004.09a
    • /
    • pp.312-316
    • /
    • 2004
  • Single-well tracer tests, especially push pull tracer tests, are more effective to estimate hydraulic parameters and microbial metabolic activities in terms of duration and cost compared to multi-well tracer tests. However, there are some drawbacks in accuracy, complicated data analysis and uniqueness. These shortages are thought to be derived from the applied conditions which affect mass recovery curve and breakthrough curve. Factors such as extraction rate, resting period, hydraulic conductivity and hydraulic gradient are considered as the major factors determining the mass recovery rate and shape of the breakthrough curve. The results of the sensitivity analysis are summarized as follows: 1) the significant change in concentration of breakthrough curve is obtained when the extraction rate increases. This effect would also be much higher if the hydraulic conductivity is lower; 2) the mass recovery rate decreases with the increase of resting time, and the difference of mass recovery rates for different resting times is inversely proportional to the hydraulic conductivity; 3) the sensitivity values decrease with time. The hydraulic conductivity affects not only the early period, but the later period of the breakthrough curves; 4) The influence of the hydraulic gradient on the breakthrough curves is greater at earlier stage than at later stage. The mass recovery rate is inversely proportional to the hydraulic gradient.

  • PDF

Quench recovery characteristics of YBCO thin film type superconducting fault current limiter (YBCO 박막형 초전도 한류소자의 퀜치 회복 특성에 관한 연구)

  • Yim, Seong-Woo;Sim, Jung-Wook;Kim, Hye-Rim;Hyun, Ok-Bae;Kim, Ho-Min;Park, Kwon-Bae;Lee, Bang-Wook;Oh, Il-Sung
    • Proceedings of the KIEE Conference
    • /
    • 2006.07b
    • /
    • pp.711-712
    • /
    • 2006
  • For the application of superconducting fault current limiters(SFCLs) to the protection system, quench recovery characteristics of Au/YBCO thin film were investigated. The Au/YBCO thin film was designed as a SFCL element with a bi-spiral pattern. The SFCL element limited the fault current successfully. For the analysis of the recovery to superconducting state, we measured resistance variation of the SFCL element after the quench. In addition, in order to investigate the dependence of quench characteristics of SFCL on the $LN_2$ cooling condition, we measured the recovery time under a pressure of 1, 2 and 3 atm. As the results, the recovery time increased in proportion to the duration of the fault currents. In the sub-cooled condition, while the quench development was exactly the same, the recovery time was shortened as the pressure increased.

  • PDF

Effect of Recovery on Dynamic Strength after Isotonic or Isometric Cool-Down Exercise (등장성 혹은 등척성 정리운동이 동적근력회복에 미치는 효과)

  • Kim, Mun-Jung;Shin, Sung-Nyu;Im, Eun-Kyo;Yi, Chung-Hwi
    • Physical Therapy Korea
    • /
    • v.1 no.1
    • /
    • pp.67-74
    • /
    • 1994
  • Our purpose of this study was to determine the most effective cool-down exercise. The recovery times of dynamic strength after isometric and isotonic cool-down exercise were measured immediately post cool-down exercise, 30 seconds later and 60 seconds later in 30 normal, healthy men from 19 to 29 years, using dumbells(Model, Iron). The recovery time of dynamic strength had a significant positive correlation with isotonic and isometric cool-down exercise using the Chi-square method (p<0.01). Sources of significant differences were determined by the Wilcoxon signed-ranks test (p<0.01). The isometric cool-down exercise significantly shortened the recovery time of dynamic strength. We suggest that the isometric cool-down exercise may be more effective than isotonic cool-down exercise in shortening the recovery time of dynamic strength.

  • PDF

Characteristics on the Transformer-Type SFCL According to Reclosing Operation the Voltage Increase (전압증가 시 재폐로 동작에 따른 변압기형 초전도 한류기의 특성 분석)

  • Choi, Soo-Geun;Choi, Hyo-Sang
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.59 no.4
    • /
    • pp.477-480
    • /
    • 2010
  • Fault current in power system is expected to increase by demand of power capacity. Therefore, when the fault occurred, fault current was increased in the power system. Many studies have been progressed to limit the fault current. Superconducting fault current limiter (SFCL) is one of them which has been studied in worldwide. In this paper, we will analyze characteristics of a transformer-type SFCL by reclosing operation when the voltage increases. Twice opening times in the reclosing of circuit breaker were set as the 0.5 and 15 seconds, respectively. Turn's number of primary and secondary coils set 4:2 and we increased voltages from 120V to 280V for each experiment. By the current waveform, maximum fault current in second and third cycles was lowered when the voltage was increased. In the recovery waveform, recovery time was increased as the voltage was increased. The reason was that power burden of the SFCL increased when consumption power was increased, so the time to get back to SFCL took longer. We compared the characteristics of a resistive-type and transformer-type SFCL. As a result, we found that the fault current of a transformer-type was lower than resistive-type and recovery time of the SFCL was shorter. Consequently, transformer-type SFCL was more profitable for limitation of fault current and recovery time under the same condition for reclosing operation.

Correlation between the Time to Surgery and That to Recovery from Postoperative Diplopia Based on a Single-Center, Retrospective Experience: A Case Series of 11 Patients

  • Kim, Nam Hoon;Kang, Seok Joo
    • Archives of Plastic Surgery
    • /
    • v.41 no.5
    • /
    • pp.486-492
    • /
    • 2014
  • Background We conducted this study to identify the correlation between the time to surgery and that to recovery from postoperative diplopia. Methods In the current single-center, retrospective study, we enrolled a total of 11 patients (n=11) who were diagnosed with white-eyed blowout fracture and underwent surgical operation at our institution between January 2009 and January 2013. To identify the correlation between the time to surgery and that to recovery from postoperative diplopia, we divided our patients into the three groups: the group A (time to surgery, <2 days) (n=4), the group B (time to surgery, 3-7 days) (n=4) and the group C (n=3) (time to surgery, 8-60 days). Then, we compared such variables as sex, age, signs of soft tissue injury, preoperative nausea/vomiting, the degree of preoperative diplopia and the side of the fracture on computed tomography scans between the three groups. Results In our series, mean age at the onset of trauma was nine years (range, 5-16 years); the mean time to surgery was 30 days (range, 2-60 days); and the mean follow-up period was one year (range, 6 months-2 years). Our results showed that the time to recovery was shorter in the patients with a shorter time to surgery. Conclusions We found that the degree of recovery from impaired ocular motility and diplopia was the highest in the patients undergoing surgical operations within 48 hours of the onset of trauma with the reconstruction of the fracture sites using implant materials.

Enhancements to the fast recovery Algorithm of TCP NewReno using rapid loss detection (빠른 손실 감지를 통한 TCP NewReno의 Fast Recovery 개선 알고리듬)

  • 김동민;김범준;김석규;이재용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.7B
    • /
    • pp.650-659
    • /
    • 2004
  • Domestic wireless network environment is changing rapidly while adapting to meet service requirements of users and growth of market. As a result, reliable data transmission using TCP is also expected to increase. Since TCP assumes that it is used in wired networt TCP suffers significant performance degradation over wireless network where packet losses are not always result of network congestion. Especially RTO imposes a great performance degradation of TCP. In this paper, we propose DAC$^{+}$ and EFR in order to prevent performance degradation by quickly detecting and recovering loss without RTO during fast recovery. Compared with TCP NewReno, proposed scheme shows improvements in steady-state in terms of higher fast recovery Probability and reduced response time.

Impact of Enhanced Recovery Program on Colorectal Cancer Surgery

  • Lohsiriwat, Varut
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.8
    • /
    • pp.3825-3828
    • /
    • 2014
  • Surgical outcomes of colorectal cancer treatment depend not only on good surgery and tumor biology but also on an optimal perioperative care. The enhanced recovery program (ERP) - a multidisciplinary and multimodal approach, or so called 'fast-track surgery' - has been designed to minimize perioperative and intraoperative stress responses, and to support the recovery of organ function aiming to help patients getting better sooner after surgery. Compared with conventional postoperative care, the enhanced recovery program results in quicker patient recovery, shorter length of hospital stay, faster recovery of gastrointestinal function, and a lower incidence of postoperative complications. Although not firmly established as yet, the enhanced recovery program after surgery could be of oncological benefit in colorectal cancer patients because it can enhance recovery, maintain integrity of the postoperative immune system, increase feasibility of postoperative chemotherapy, and shorten the time interval from surgery to chemotherapy. This commentary summarizes short-term outcomes and potential long-term benefits of enhanced recovery programs in the treatment of colorectal cancer.

Tradeoff between the Output Voltage Deviation and Recovery Time of Boost Converters

  • Ge, Junjie;Yuan, Liqiang;Zhao, Zhengming;Lu, Ting;He, Fanbo;Feng, Gaohui
    • Journal of Power Electronics
    • /
    • v.15 no.2
    • /
    • pp.338-345
    • /
    • 2015
  • The time-optimal control for boost converters can achieve the minimum recovery time. However, their output voltage deviation is quite large. Since the minimum output voltage deviation and minimum recovery time cannot be obtained at the same time, a novel energy control is proposed to achieve a superior tradeoff between them in this paper. The peak value of the inductor current can be decreased as well. Its control parameter is easy to choose. When compared with the conventional control methods, the proposed control shows a better dynamic performance. Experimental results, which are in agreement with the theoretical analysis, are provided to verify the proposed control method.

Non-Iterative Threshold based Recovery Algorithm (NITRA) for Compressively Sensed Images and Videos

  • Poovathy, J. Florence Gnana;Radha, S.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.9 no.10
    • /
    • pp.4160-4176
    • /
    • 2015
  • Data compression like image and video compression has come a long way since the introduction of Compressive Sensing (CS) which compresses sparse signals such as images, videos etc. to very few samples i.e. M < N measurements. At the receiver end, a robust and efficient recovery algorithm estimates the original image or video. Many prominent algorithms solve least squares problem (LSP) iteratively in order to reconstruct the signal hence consuming more processing time. In this paper non-iterative threshold based recovery algorithm (NITRA) is proposed for the recovery of images and videos without solving LSP, claiming reduced complexity and better reconstruction quality. The elapsed time for images and videos using NITRA is in ㎲ range which is 100 times less than other existing algorithms. The peak signal to noise ratio (PSNR) is above 30 dB, structural similarity (SSIM) and structural content (SC) are of 99%.

Loop transfer recovery design for input-delayed systems (입력 시간지연 시스템의 루우프 전달복구 설계 기법)

  • 박상현;이상정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1996.10b
    • /
    • pp.1201-1204
    • /
    • 1996
  • The previous results on LTR methods for time delay systems need the solution of the operator-type Riccati equation. In addition, it can be difficult to make the target loop shape representing the design specification. This paper proposes a new LTR method for input-delayed systems using well-established LTR method for non-delay systems. For doing this, a time delay margin is derived and the time delay of the input-delayed systems is assumed less than equal to the time delay margin. A simple example is presented for illustrations.

  • PDF