• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.329-330
• /
• 2006

This paper presents a recovery technique for images with block-based corruption by transmission losses. Conventional methods that do not consider edge directions can cause blocked blurring artifacts. In this paper, we present a block recovery scheme using Haar wavelet features. The adaptive selection of neighboring blocks is performed based on the energy ratio f wavelet subbands. The lost blocks are recovered by linear interpolation in the spatial domain using selected block pairs. The proposed directional recovery method is effective for the strong edge because it exploits the varying neighboring blocks adaptively according to the edges and the directional information in the image. The proposed method outperforms the previous methods that used only a predefined set of neighboring blocks.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.281-283
• /
• 2008

The superconducting fault current limiter (SFCL) using magnetic coupling of two coils with series connection, which was suggested by us, has the merit to increase the operational current and the limiting impedance of the SFCL through the adjustment of the inductance ratio and the winding direction of two coils. In addition, the recovery characteristics of the SFCL is affected by the winding direction of two coils as well as two coils' inductance ratio. In this paper, the fault current limiting and recovery characteristics of a SFCL using magnetic coupling of two coils with series connection were analyzed. Through the analysis based on the experimental results, the recovery characteristics and the current limiting characteristics of the SFCL were confirmed to be improved more in case of the additive polarity winding.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.15-21
• /
• 2024

전기차용 리튬이온배터리의 수요가 증가함에 따라 향후 발생할 폐리튬이온배터리 중의 유가금속 회수가 필요하다. 본 연구에서는 리튬이온배터리의 NCM계 양극재를 수소환원과 수침출에 의해 리튬을 수산화리튬으로 회수할 때의 회수율에 미치는 반응온도의 영향을 조사하였다. 반응온도가 상승함에 따라 수소에 의한 NiO, CoO의 환원에 의해 무게 감소율이 반응초기부터 급격하게 증가하였으며 동시에 H₂O 발생량도 증가하였다. 602 ℃ 이상에서는 양극재 중의 Ni, Co가 전부 환원되어 금속상으로 존재하였다. 그리고 수소환원 온도의 상승과 함께 Li 회수률도 증가하였으나 704 ℃ 이상에서는 약 92 % 이상의 유사한 수준을 나타내었다. 따라서 폐Li이온 배터리의 전처리로 수소환원하는 것에 의해 리튬만 사전에 회수하고 잔사를 재처리하면 효율적으로 유가금속을 분리하여 회수할 수 있을 것으로 기대된다.

• Korean Journal of Acupuncture
• /
• 제32권1호
• /
• pp.20-29
• /
• 2015

Objectives : The objectives of this study is to compare the effects of electroacupuncture(EA), warm needling(WN) and Radio Frequency warm needling(RFWN) stimulations on the acupoints at the artificially damaged ankles of Sprague-Dawley rats, which could be classified as the Grade 3. Methods : The foot weight bearing force ratio(FWBFR) of ankle sprain was measured first at 24 hours after without any other stimulations. Pain Recovery Index(PRI) represents the analgesic level, and modified Pain Recovery Index(mPRI) shows the accumulated recovery level. PRI was measured at 2 hours after each stimulus on GB34, GB39 and GB42, and mPRI was during 7 days. Results : EA stimulation of GB34 and GB39 acupoint in grade 3 ankle sprain showed a marked analgesic and recovery effect. RFWN of GB42 exhibited significant analgesic and pain recovery effect. RFWN of GB34 resulted in pain recovery effect but not analgesic effects, and RFWN of GB39 resulted in analgesic effect 2 hours after but not pain recovery. However, WN did not affect the pain recovery among three acupoints at all. Conclusions : In the Grade 3 ankle sprain model, the difference of analgesic effects were explained by the acupoints and the stimulation methods according to the accumulated recovery effects during 7 days. It is insufficient to determine that a certain acupoint has a specific analgesic effect depending on the stimulation method by the results of this study. Therefore, the effects of each stimulation on the acupoints in any other meridians at the sprained ankle should be compared and analyzed.

• 자원리싸이클링
• /
• 제30권6호
• /
• pp.61-67
• /
• 2021

이리듐이 함유된 염산 침출액으로부터 시멘테이션법을 이용한 이리듐 회수 연구를 실시하였다. 환원제로는 아연을 사용하였으며, 환원제 투입량, 이리듐 초기 농도, 초기 pH, 반응 시간 변화 및 초음파 처리에 따른 이리듐 회수율 특성 실험을 실시하였다. 교반기만 사용한 조건에서는 아연 투입량 증가에 따라 이리듐의 회수율이 지속적으로 증가하였으나, 아연 당량이 40 조건에서 70% 수준의 이리듐 회수율을 나타냈다. 초음파 처리에 따른 시멘테이션 조건에서는 아연 투입량이 20 당량 이하 조건에서 이리듐의 회수율이 감소하였고, 40 당량 조건에서는 이리듐 회수율이 급격히 증가하는 특성을 나타났다. 이는 초음파 처리에 따른 아연의 이온화 및 이리듐 재용해되어 나타난 결과로 판단된다. 초음파 장치를 교반기와 함께 사용한 조건에서 교반기만 사용한 동일 조건에 비해 27% 이상 이리듐 회수율이 증가함을 확인하였고, 99%의 이리듐 회수가 가능하였다(아연 40 당량, 초기 pH 0.01, 100 ml, 이리듐 초기 농도 1770 ppm, 60 min.).

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.8-20
• /
• 2006

For large scale separation hydrogen from different mixing ratio(60/40 and 80/20 vol.%) of hydrogen and methane $1Nm^3/hr$ and $4Nm^3/hr$ 2bed-6step pressure swing adsorption(PSA) process was used, respectively. The effects of the feed gas pressure, adsorption time, the feed flow rate and the P/F(purge to feed) ratio on the process performance were evaluated. In the $1Nm^3/hr$ PSA results, 11 atm adsorption pressure and 0.10 P/F ratio might be optimal values to obtain more than 75 % recovery and 99 % purity hydrogen in these processing. The optimum feed flowrate was 22 LPM and 17 LPM in the ratio 60/40 and 80/20, respectively. In the $4Nm^3/hr$ PSA results, 10 atm adsorption pressure might be simulated values to obtain more than 80 % recovery and 99 % purity hydrogen in these processing.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.645-654
• /
• 2019

In this paper, a new high step up DC/DC converter with a modified super-lift technique is presented. The coupled inductor technique is combined with the super-lift technique to provide a tenfold or more voltage gain with a proper duty cycle and a low turn ratio. Due to a high conversion ratio, the voltage stress on the semiconductor devices is reduced. As a result, low voltage ultra-fast recovery diodes and low on resistance MOSFET can be used, which improves the reverse recovery problems and conduction losses. This converter employs a passive clamp circuit to recycle the energy stored in the leakage inductance. The proposed convertor features a high conversion ratio with a low turn ratio, low voltage stress, low reverse recovery losses, omission of the inrush currents of the switch capacitor loops, high efficiency, small volume and reduced cost. This converter is suitable for renewable energy applications. The operational principle and a steady-state analysis of the proposed converter are presented in details. A 200W, 30V input, 380V output laboratory prototype circuit is implemented to confirm the theoretical analysis.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.13-14
• /
• 2013

The aim of this study is to investigate the parametric characteristics on regenerative system with oxy-fuel combustion by experiment. Regenerative system with a pair of oxygen burners and regenerators is used for evaluating regenerator characteristics according to design parameters such as ball (regenerator medium) size, regenerator weight, and bypass of exhaust gas. The temperature profiles with time are varied by ball size and regenerator weight. The bypass of exhaust gas shows that the heat recovery ratio increases while the regenerating temperature efficiency slightly decreases.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.205-213
• /
• 2006

A cost-effective magnetic-coupled AC-PDP sustain driver with low switching loss is proposed. The transformer reduces current stress in the energy recovery switches which affects circuit cost and reliability. The turns-ratio can be used to adjust the sustain pulse slopes which affect gas discharge uniformity. Dividing the recovery paths prevents abrupt changes in the output capacitance and thereby switching losses of the recovery switches is reduced. In addition, the proposed circuit has a more simple structure because it does not use the recovery path diodes which also afford a large recovery current. By reducing the current stress and device count in the energy recovery circuit, the proposed driver may have decreased circuit cost and improved circuit reliability.

• 자원리싸이클링
• /
• 제24권5호
• /
• pp.33-39
• /
• 2015

음이온 교환막을 이용한 확산투석에 의해 폐솔더 박리액으로부터 질산을 효율적으로 회수하기 위한 기초 연구를 실시하였다. 우선 모의용액 실험의 경우 유속, 유속비, 질산농도, 금속이온 종류 및 농도 등이 질산 회수율에 미치는 영향을 조사하였다. 유속이 증가함에 따라 질산 회수율은 감소하였고 급액에 대한 순수의 유속비(W/F)가 증가할수록 질산 회수율은 증가하여 유속비가 1.5이상에서 약 99%의 질산 회수율을 보였다. 급액중 질산용액의 농도가 증가함에 따라 3.0 M 까지는 산회수율이 증가 하였으나 3.0 M 이후로는 회수율은 점차 낮아 졌다. 확산투석막을 통과하는 금속이온의 투과율은 Pb, Na, Cu순 이었고, Fe과 Sn은 투과되지 않았다. 실제 폐솔더액을 사용하여 유속 $0.9L/hr-m^2$, W/F = 1.3 으로 확산 투석을 실시한 결과 약 94%의 질산 회수율을 얻을 수 있었다.