• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.497-504
• /
• 2015

Apart from hydrates, asphaltenes, and inorganic minerals, paraffinic waxes are also very important in flow assurance area. Evaluation of wax gel behavior has been important as off-shore oil recovery becomes more popular in oil production. Restart after either planned or emergency shutdown requires pump operation in high pressure since a waxy oil forms troublesome gel. In this paper, vane method is introduced to determine wax gel strength by determining yield stress. Prediction of gel strength are discussed in qualitative and quantitative manners.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.78-82
• /
• 1984

Effects of various drying conditions of agar gel on the physico-chemical properties of dried agar were investigated. For drying of the agar gel$(1.0{\times}1.0{\times}34.0cm)$ by means of sun drying, simple solar drying, hot-air drying ($30^{\circ}C$, control, natural convection), hot-air drying ($30^{\circ}C$, pretreatment, natural convection) and freeze drying, it took 96, 75, 67, 50 and 21 hours, respectively. The gel strengths of dried agar gel prepared by sun drying, solar drying, freeze drying and spray drying were320, 370, 270 and $360g/cm^2$, respectively and that of hot air-dried agar gel was influenced by drying temperature, pretreatment an mode of heat transfer. The gel strength, the gelation temperature and other quality index of spray-dried agar were not inferior to those of sun-dried agar, but it was not expected to be economical because of it recovery rate. In case of hot air drying, the gel strength value of agar increased as the drying rate increased. No significant differences among various products were noted in the gelation temperature, the melting temperature, the ash and $SO_3$ content.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.123-134
• /
• 2007

This study was carried out for evaluating correlation of aging level and deformation resistance of asphalt mixtures conditioned by artificial aging treatment. The specimens were made of the short-term aged loose asphalt mixture which was kept in a convection oven at $154^{\circ}C$ for 2 hours, and then were artificially aged at $110^{\circ}C$ for 24, 48, 72 and 96 hours for long-term aging. Deformation strength ($S_D$) and large molecular size ratio (LMS(%)) were measured after short-term and each long-term aging treatment to evaluate aging extents of each mixture with aging time using GPC(Gel-permeation chromatograph) test. It is shown that the $S_D$ and LMS(%) were increased with aging time increment, and that LMS(%) quantity and $S_D$ have relatively good correlation each other. This study found that the aged asphalt mixture had better resistance against rutting and it was possible to estimate rutting characteristics of asphalt mixtures by using LMS(%) without a binder recovery.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.328-334
• /
• 2007

Chemical heat pump system of 2-propanol/acetone/hydrogen is most suitable to the recovery of waste heat of power plant. various types of 5 wt% Pt-alumina catalysts were prepared for 2-propanol dehydrogenation using sol-gel method. The characteristics and the dehydrogenation reaction rate of each catalyst were investigated. Pt-alumina xerogel catalyst has excellent reaction rate and good durability in comparison with the existing alumina supported Pt catalysts. Pt-alumina aerogel catalyst had the highest reaction rate in all prepared catalysts, but sufficient aging time was necessary to maintain its reaction rate. A potential advantage of the aerogel catalyst is the fact that the high temperature heat treatment is not required. Without heat treatment or with low temperature heat treatment, the Pt-alumina aerogel catalyst has excellent reaction rate as well as durability and this gives us the economic advantage. Alumina xerogel supported Pt catalyst prepared by incipient wetness method showed good reaction rate, and had good mechanical strength. Blank alumina xerogel prepared by sol-gel method can be used for the support of metal catalysts.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.495-500
• /
• 1994

Mackerel water-soluble protein solution Mackerel meat washing water were concentrated by isoelectric point shifting precipitation process, and the concentrates were utilized as a material for processing of an elastic gel food such as kamaboko. The water-soluble proteins were partly polymerized during the isoelectric point shifting precipitation process. Then, the water soluble protein concentrates were partly substituted for frozen minced Alaska pollack meat in processing of a good quality kamaboko. The maximum substitution percentage for good quality kamaboko manufacturing was concluded to be below $30\%$, according to the criteria of color difference, jelly strength and folding tests using the substituted recovered protein concentrates.