• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.183-190
• /
• 2018

This paper presents optimization of the main spar of Human-Powered Aircraft (HPA) wing. Mass minimization was attempted, while considering large torsional deformation of the beam. Sequential Quadratic Programming (SQP) method was adopted as a relevant tool to conduct structural optimization algorithm. An inner diameter and ply thicknesses of the main spar were selected as the design variables. The objective function includes factors such as mass minimization, constant tip bending displacement, and constant tip twist of the beam. For estimation of bending and torsional deformation, the geometrically exact beam model, which is appropriate for large deflection, was adopted. Properties of the cross sectional area which the geometrically exact beam model requires were obtained by Variational Asymptotic Beam Sectional Analysis (VABS), which is a cross sectional analysis program. As a result, maintaining tip bending displacement and tip twist within 1.45%, optimal design that accomplished 7.88% of the mass reduction was acquired. By the stress and strain recovery, structural integrity of the optimal design and validity of the present optimization procedure were authenticated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.839-846
• /
• 2004

The purpose of this study was to investigate the possibility of medicinal plants application as an edible functional food resource. This research was planned to apply Artesmisia capillaris, which is one of the most widely used oriental medicinal resource into beverages, and to evaluate the validity and the nutrients of the developed beverage with Artemisia capillaris. Following this plan, we analyzed contents of the general nutritional composition, mineral and amino acid contents. And to evaluate the improvement of blood circulation and the ability to recover from fatigue, we had a group of athletes to regularly take the beverage before and after exercise and checked the heart rates, and blood components before exercise and after exercise. Brix, pH and titratable acidity of develoued drink were 9.2%, 4.4 and 0.04%, respectively. The approximate nutritional composition of beverage was carbohydrate, 2.70%, crude protein, 6.00%, crude ash, 0.20%, and crude fat, 0.10%. And developed beverage contained essential amono acids and minerals (p, Ca, K, Na, Fe, Mn, Zn). Heart rates, lactic acid, glucose, creatinine, LDH, GOT, GPT and lipid concentratios in blood were decreased after taking the beverage with Artemisia capillaris for 6 weeks, both in stable condition and after exercise. Since the athletes who participated In our research were doing aerobic exercise regularly, we judged that this result was formed not only by aerobic exercise, but also by the function of developed beverage with Artemisia capillaris the athletes took for 6 weeks. We believe that taking the beverage regularly will help the improvement of the public health and the athleticism of the athletes. We hope that this result will be used as the basic resource in developing of the beverage with Artemisia capillaris in the near future.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.253-259
• /
• 2015

The information of contrast media concentration on target organ is very important to get reduce the side effect and high contrast imaging. We investigated alternation of signal intensity as a function of the modality of Gd-based contrast media on spin echo and ultra short time echo (UTE) of T1 effective pulse sequence at 3T MRI unit. Gadoxetic acid, which is a MRI T1 contrast medium, was used to manufacture an agarose phantom diluted in various molarities, and sterile water and agarose 2% were used as the buffer solution for the dilution. The gold standard T1 calculation was based on coronal single section imaging of the phantom mid-point with 2D Inversion recovery spine-echo pulse sequence MR imaging for testing of phantom accuracy. The 1-2mmol/L and 7mmol/L was shown the maximum signal intensity on spin echo and UTE respectively. We confirm the difference of contrast media concentration which was shown the maximum signal intensity depending on the T1 effective pulse sequence.

• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.208-211
• /
• 1998

Reflex sympathetic dystrophy is an important clinical entity that is characterized by excessive or prolonged pain, vasomotor and other autonomic disturbances, delayed recovery of function, and trophic changes. This syndrome is among the most frequently encountered problems in clinical medicine, and proper diagnosis and therapy are critical. Accidental or surgical trauma or one of a variety of disease states may become a precipitating factor. Proper recognition and treatment result in rapid elimination of symptoms and complete recovery. A 56-years old male accidented total amputation of the proxomal part of the left index finger in May, 1996. Emergently, complete replantation procedure was successfully performed in the department of reconstructive surgery, medical center, Korea University. Afterward, he began to suffer from uncontrolled, prolonged pain in left index finger, proximally spreading pain to the left upper extremity and limited joint movement of the left shoulder. Although many treatments were used for this syndrom, not all of them were effective. Furthermore, the treatments which proved effective had detrimental side effects. However, thoracoscopic left thoracic sympathectomy was performed in our department. This therapy successfully relieved the pain and improved shoulder joint movement.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.197-204
• /
• 2016

The objective of this work was to investigate the performance of pervaporation process for recovery of ester compounds from model aqueous solutions and how the fluxes of esters and water were affected by changes in feed concentration and temperature. The flux of ethyl acetate (EA), propyl acetate (PA), ethyl propionate (EP), butyl acetate (BA), and ethyl butyrate (EB) increased with an increase in feed concentration from 0.15 wt% to 0.60 wt%, and increased with temperature change from $30^{\circ}C$ to $50^{\circ}C$. The flux of esters (EA, PA, EP, BA, and EB) was in order of (EA) < (PA, EP) < (BA, EB). This result meant that the flux strongly depended on affinity between esters and membrane surface; EA is the least hydrophobic because it has one hydrophobic function group ($-CH_2-$), (PA, EP) have two ($-CH_2-$), and (BA, EB) are the most hydrophobic because these have three ($-CH_2-$). As well as such an influence of hydrophobicity of ester molecules on ester flux, the influence of hydrophobicity of membrane surface on ester flux needs further investigation. With increase in temperature, water flux of aqueous EA, PA, EP, BA, and EB solution increased. However, water flux of aqueous ester solutions did not change appreciably with increase in concentration. This experimental results may be used as fundamental data for pervaporation (PV) to improve the aroma recovery process as an alternative to thermal evaporation and distillation processes.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.47-51
• /
• 2006

Recently, CMP (Chemical Mechanical Polishing) is one of very important processing in semiconductor technology because of large integration and application of design role. CMP is a planarization process of wafer surface using the chemical and mechanical reactions. One of the most important components of the CMP system is the polishing pad. During the CMP process, the pad itself becomes smoother and glazing. Therefore it is necessary to have a pad conditioning process to refresh the pad surface, to remove slurry debris and to supply the fresh slurry on the surface. A conditioning disk is used during the pad conditioning. There are diamonds on the surface of diamond disk to remove slurry debris and to polish pad surface slightly, so density, shape and size of diamond are very important factors. In this study, we characterized diamond disk with 9 kinds of sample.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.279-284
• /
• 2007

Purpose: The vein graft was considered as a useful conduit for nerve defect. But the problem is that it might be collapsed in long vein graft state. A new experimental model using vein graft filled with hyaluronic acid was considered. Methods: Thirty rats were used for the experimental animal. In group I, one side of the femoral nerve was exposed and a segment was removed about 15mm. The neural gap was connected with nerve graft. In group II, the nerve gap was connected with vein graft only. In group III, the nerve gap was connected with vein graft filled with hyaluronic acid. A walking track analysis was made periodically for 2 months and NCV(nerve conduction velocity) was executed at the end of the experiment. And morphologic studies were also done for all groups Results: In a walking track analysis, the toe-spread was widen and the foot-length was lengthened. The recovery of the toe-spread and foot length was checked 2 weeks interval, periodically for two months. The SFI (sciatic function index) was $-52.5{\pm}8.2$ in group I, $-68.1{\pm}4$ in group II, $-55.3{\pm}7.9$ in group III. In electrophysiological study, NCV(nerve conduction velocity) was $26.71{\pm}3.11m/s$ in group I, $17.94{\pm}4.35m/s$ in group II, $25.69{\pm}2.81m/s$ in group III. The functional recovery in group I and III was superior to that the group II statistically(p < 0.05) Under electromicroscopic study, the number of the myelinated axons were $1419.1{\pm}240$ in group I, $921.7{\pm}176.8$ in group II, $1322.2{\pm}318$ in group III. The number of the myelinated axons were much more in group I and III than group II statistically (p<0.05). Conclusion: This study suggested that the vein graft filled with hyaluronic acid is more effective than vein graft only for the conduit of the nerve gap. It was thought that the technique could be used in clinical cases with nerve defects as an alternative method to classical nerve grafts.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Clinics in Shoulder and Elbow
• /
• v.16 no.2
• /
• pp.148-152
• /
• 2013

We report a case of simultaneous anterior and posterior interosseous nerve syndrome in association with shoulder arthroscopy. Shoulder arthroscopy was performed in a 45-year-old male patient with left shoulder instability. In the right lateral decubitus position, under general anesthesia, traction was applied with elbow extension for 2 hours. One week after surgery, the patient revisited the clinic for weakness of the flexor of the thumb, index finger, and extensor of the fingers. Recovery was not achieved after four months of observation. Therefore, nerve exploration was performed in the anterior and posterior interosseous nerve and hourglass-like fascicular constriction was detected in the posterior interosseous nerve. The area of constriction was removed and epineural neurorrhaphy was performed. Three months after exploration, the extension function of the fingers was recovered. Recovery was achieved gradually, and, five months after nerve exploration, the symptoms were completely recovered. Simultaneous anterior and posterior interosseous nerve syndrome following shoulder arthroscopy is rare. However, it could occur due to the traction and position of the patient. Thus, the operator should be careful of traction and position of the patient.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.39-46
• /
• 2004

The amount of electric furnace dust has been steadily increasing due to the increase of iron scraps which are usually recycled by electric furnace melting process. To date, this electric furnace dust has usually been treated by landfilling, however, because of shortage of landfill sites and heavy metal leaching more desirable treatment schemes are urgently needed. Among several possible schemes for the proper treatment of electric furnace dust, its recycling can be said to be most desirable. In present study, the triboelectrostatic separation of zinc and zinc-containing components from electric furnace dust was attempted based on its physicochemical properties such as particle shape, size distribution, and chemical assay. The dust was found to be mixed with spherical and non-spherical shaped particles and its major component materials were $ZnFe_2$$O_4$, ZnO, Fe, Zn, and FeO. The content of zinc-containing components in the entire dust was observed to be in the range of 15～30 wt%, which reasonably justified that zinc is recyclable. The triboelectrostatic characteristic of each component material was found to be different each other since their work functions were different, and based on this characteristic zinc and zinc-containing component could be flirty separated from the dust. After selecting a proper tribo-elec-trification material, the separation features of zinc and zinc-containing component were examined by taking the distance of electrodes, electric field strength, and scavenging as the experimental variables. The highest zinc-content obtained under the optimal separating condition was found to be up to 50wt%.