• 한국정보과학회논문지:정보통신
• /
• 제28권4호
• /
• pp.559-569
• /
• 2001

인터넷의 급속한 성장과 함께 멀티캐스트 프로토콜을 사용하는 어플리케이션들이 증가하고 있는 추세이다. 이러한 멀티캐스트 프로토콜에서 중요하게 요구되는 사항은 신뢰성과 확장성이다. 그 중 확장성을 향상시키기 위해서 여러 지역적 오류 복구 기법이 사용되고 있다. 본 논문에서는 기존의 지역적 오류 복구 기법에서 발생하는 제한점을 설명하고, 이 문제를 해결하기 위해서 보다 안정적이고 효과적인 프로토콜을 제안하였다. 제안된 프로토콜은 다음과 같은 세 가지 특성을 가진다. 첫 번째는 NAK 메시지를 기능에 따라 오류 복구 요청과 NAK-suppression으로 분리하여 각각 전송함으로써, 각 기능에 대해 최적화를 시키는 것이다. 두 번째는 점진적, 분산적으로 선정된 지역 대표가 오류 복구를 보다 결정적으로 수행하도록 하는 것이다. 세 번째는 제어 메시지의 TTL값을 동적으로 조정함으로써, 오류 복구 영역을 최소화시키는 것이다. 제안된 프로토콜은 시뮬레이션 상에서 다른 프로토콜과의 비교 실험을 통해 성능평가를 하였다. 실험 결과, 제안된 프로토콜은 오류 복구 시간과 네트워크 오버헤드를 감소시킴으로써 확장성을 향상시킨다는 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.49-58
• /
• 1997

In this paper, a transfer function was obtained for a PWM high speed solenoid valve controlled metal belt CVT system. The transfer function was defined as the ratio of speed ratio to PWM duty ratio and derived in time domain by linear regression analysis from the experimental results. The transfer function obtained showed different dynamic characteristics for the up and down shift. Also, LQG/LTR controller was designed for the CVT system using the transfer function. It is seen from the experimental results that LQG/LTR control showed good performance for the speed ratio tracking and disturbance rejection. The phase difference and relatively slow response are considered due to the inaccuracy os the transfer functions, which resulted from the inherent nonlinearities of the transmission characteristics of the metal belt CVT.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.129-136
• /
• 1992

압력식(壓力式) 파고계(波高計)에서 측정(測定)되어진 압력파형(壓力波形)으로부터 수위변동(水位變動)을 추정(推定)하는 방법(方法)에 대해서 1) Fast Fourier Transform Method(FFTM), 2) Local Curvature Method(LCM), 3) Individual Wave Method(IWM)의 3가지 방법(方法)을 비교(比較)하여, 천해역(淺海域)에 있어서의 파랑측정(波浪測定)에 대한 압력식(壓力式) 파고계(波高計)의 적용성(適用性)에 대해 검토(檢討)했다. 그 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1) 측정(測定)되어진 압력파형(壓力波形)으로부터 수위변동(水位變動)을 추정(推定)할 때에 사용(使用)되어지는 이론선형응답함수(理論線形應答函數)(Hp=coshkh/coshk(h+z)의 적용가능범위(適用可能範圍)(cut-off-frequency)는 $kh{\leq}3.0$이다. 그리고 kh > 3.0의 영역(領域)에 있어서의 이론선형응답함수(理論線形應答函數)는 일정치(一定値)를 부여함으로써 매우 정도높은 수위변동(水位變動)을 얻을 수 있다. 2) LCM에 의한 수위변동(水位變動)의 변환(變換)에 있어서는 측정(測定)된 압력파형(壓力波形)속에 포함되어 있는 단주기파(短週期波)들에 의해 크게 영향(影響)을 받는다. 그러므로, kh > 1.5인 영역(領域)의 압력변동(壓力變動)을 무시할 필요(必要)가 있다. 3) FFTM 및 IWM에 의해 추정(推定)되어진 통계량(統計量)의 재현성(再現性)은 양호하고, 특(特)히 평균주기(平均週期)의 재현성(再現性)으로부터 비선형성(非線型性)이 강한 영역(領域)에 있어서는 IWM이 유효(有效)한 수단이라고 사려되어진다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• PNF and Movement
• /
• 제20권2호
• /
• pp.147-156
• /
• 2022

Objective: Electrical stimulation is an assistive technology used to aid the recovery of upper limb use after stroke. The purpose of this systematic review was to determine the effects of electrical stimulation on upper extremity function in individuals with hemiparetic stroke and to develop an evidence base that supports the use of electrical stimulation for upper limb recovery after stroke. Design: A systematic review based on randomized controlled trials (RCTs). Methods: Studies published before April 20 2021 were collected for this review by searching PubMed, four other databases, and RCTs that reported the effects of electrical stimulation on upper extremity function in individuals with the characteristic stroke type. Information on the following parameters was extracted from each study: surname of first author, published year, country, participants, intervention, intervention's intensity, comparison, outcomes, additional therapy, and summary of results. This review also evaluated the bias within each study, including any selection bias, performance bias, detection bias, attrition bias, and reporting bias. Results: This review included five RCTs, and 208 stroke patients were included in the analysis. Stroke patients who underwent electrical stimulation showed significantly improved grip and pinch strengths, wrist range of motion, and basic daily living compared to those in the control group; however, there was no improvement in upper extremity function. Of the selected papers, 60% showed a "high risk" of performance bias, and 20% showed a "high risk" of detection bias. Conclusions: The results of this systematic review suggest that electrical stimulation provides some benefits to stroke patients, such as improved hand strength and range of motion. However, future studies are needed to provide clinical evidence of the effects of electrical stimulation on upper extremity function in stroke patients.

• 동의생리병리학회지
• /
• 제23권5호
• /
• pp.1080-1086
• /
• 2009

This study was designed to investigate the effects of Gastrodiae Elata Pharmacopuncure at GB20 on motor control and cognitive dysfunction recovery after mild traumatic brain injury in rats. Rats were divided into three groups; (1) no treatment after traumatic brain injury(experiment I), (2) Treatment with NPA after traumatic brain injury(experiment II), (3) Treatment with GEP after traumatic brain injury(experiment III). In our study, we carried out behavioral test(Rotarod, Morris water maze) and immunohistochemistry study of the change BDNF in the hippocampus(pre, $7^{th}$, $14^{th}$ day). In Rotarod test(motor control function) was significantly increased in the experimental group III as compared with experimental group I, II on $7^{th}$(p<0.01) and $14^{th}$ day(p<0.001). In Morris water maze test(cognitive function) was significantly decreased in the experimental group III as compared with experimental group I, II on $14^{th}$ day(p<0.001). In immunohistochemistric response of BDNF in the hippocampus, the experimental group III was more immune response than the other groups on $14^{th}$ day. These results imply that Gastrodiae Elata Pharmacopuncure at GB20 can play a role in facilitating recovery of motor control and cognitive function after mild traumatic brain injury in rats.

• 대한의생명과학회지
• /
• 제24권4호
• /
• pp.411-417
• /
• 2018

The aim of this study was to investigate the impact of participation in the 622 km hyper-ultra-marathon on hepatic metabolism and renal function in middle-aged men. Healthy middle-aged male amateur ultra-marathoners between the ages of 40 and 60. Blood was collected at the pre-race, immediately after 300 km, 622 km hyper-ultra marathon race, 72 hours (3 day) and 144 hours (6 day) after the race, AST (aspartate aminotransferase), ALT (alanine aminotransferase), ALP (alkaline phosphatase), ${\gamma}$-GTP (gamma glutamyl transferase), T-Bil (total bilirubin), D-Bil (direct bilirubin), T-protein (total protein), albumin, uric acid, BUN (blood urea nitrogen), creatinne were analyzed. ALP was significantly increased at 300 km, 622 km, day 3 and day 6 than the pre-race. ${\gamma}$-GTP, T-protein, albumin, uric acid, BUN and creatinine were not significantly different between the distances and the recovery period respectively. AST and ALT were significantly increased at 300 km, 622 km, day 3 and day 6 than the pre-race, respectively (P<0.05) at day 3 and day 6 they showed significant decrease from 300 km and 622 km, respectively (P<0.05). T-Bil and D-Bil increased significantly at 300 km and 622 km, respectively (P<.05) and significantly decreased at day 3 (P<0.05) compared to the pre-race, at day 3 and day 6 they were decreased significantly than 300 km and 622 km, respectively (P<0.05). In conclusion, no disturbance of renal function was observed according to the distances and between the recovery period of 622 km hyper-ultra marathon race, but reversible hepatocyte function could be degraded and some hemolysis of blood vessels was induced.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.759-764
• /
• 2001

The separation performance of zigzag air classifier with angle of 90 degrees was studied using narrow size fractions of thin square samples and granular samples. The simulation results of air velocity inside the classifier indicated that the zigzag geometry induces a new pattern consisting of an upward flow and a circulation flow, Experimental results showed that overflow product recovery was described as an integral calculus of normal distribution as a function of dimensionless air velocity ( $V_{A}$ $V_{A50}$), where $V_{A}$ is superficial air velocity and $V_{A50}$ is the $V_{A}$ at the fifty percent recovery. The $V_{A}$ values were predicted using the equations derived from dynamics for a particle dropping in air. A monitoring system that utilizes changes in acoustic signals emitted during the process of air classification was developed to separate PET with desired recovery or grade. The technical feasibility of the on-line monitoring of the PET recovery and grade was demonstrated by measuring relative energy of the signals.signals.als.

• Journal of Photoscience
• /
• 제9권3호
• /
• pp.65-70
• /
• 2002

In the rice leaves treated with methyl viologen (MV), the photochemical efficiency of PSII (or $F_{v/}$F $m_{m}$) was significantly decreased, and significant portion of the photoinactivation process was reversible during the dark-recovery. The dark-reactivation process was relatively slow, reaching its plateau after 2-2.5 h of dark incubation. The damaged portion of functional PSII was 13％, based on the value of I/ $F_{o}$- I/ $F_{m}$ after this dark-recovery period. The reversible photoinactivation process of PSII function in the MV-treated leaves consisted of a xanthophyll cycle-dependent development of NPQ and a xanthophyll cycle-independent process. The latter process was reversible in the presence of nigericin. As well as the increase in the values of Chl fluorescence parameters, the epoxidation process during the dark-recovery after the MV-induced photooxidation was very slow. These results suggest that the photooxidative effect of MV is partly protected by the down-regulation of PSII before inducing physical damages in core proteins of PSII.I.I.I.I.