• Journal of the Optical Society of Korea
• /
• v.17 no.2
• /
• pp.213-218
• /
• 2013

Although infrared focal plane array (IRFPA) detectors have been commonly used, non-uniformity correction (NUC) remains an important problem in the infrared imaging realm. Non-uniformity severely degrades image quality and affects radiometric accuracy in infrared imaging applications. Residual non-uniformity (RNU) significantly affects the detection range of infrared surveillance and reconnaissance systems. More effort should be exerted to improve IRFPA uniformity. A novel NUC method that considers the surrounding temperature variation compensation is proposed based on the binary nonlinear non-uniformity theory model. The implementing procedure is described in detail. This approach simultaneously corrects response nonlinearity and compensates for the influence of surrounding temperature shift. Both qualitative evaluation and quantitative test comparison are performed among several correction technologies. The experimental result shows that the residual non-uniformity, which is corrected by the proposed method, is steady at approximately 0.02 percentage points within the target temperature range of 283 K to 373 K. Real-time imaging shows that the proposed method improves image quality better than traditional techniques.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.61-69
• /
• 2018

In this paper, we propose a method for recognizing ground target using dual polarization channels in millimeter waveband air-to-surface radar. First, the Push-Broom target detection method is described and the received signal is modeled considering flight-path scenario of air-to-surface radar. The scattering centers were extracted using the RELAX algorithm, which is a time domain spectral estimation technique, and the feature vector of the target was generated. Based on this, a DB for 4 targets is constructed. As a result of the proposed method, it is confirmed that the target classification rates is improved by more than 15% than the single channel using the data of the dual polarization channel.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.620-626
• /
• 2019

With the development of robot technology, the expectation of autonomous mission operations has increased, and the research on robot control architectures and mission planners has continued. A scalable and robust control architecture is required for unmanned surface vehicles (USVs) to perform a variety of tasks, such as surveillance, reconnaissance, and search and rescue operations, in unstructured and time-varying maritime environments. In this paper, we propose a robot control architecture along with a new utility function that can be extended to various applications for USVs. Also, an additional structure is proposed to reflect the operator's command and improve the performance of the autonomous mission. The proposed architecture was developed using a robot operating system (ROS), and the performance and feasibility of the architecture were verified through simulations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.319-330
• /
• 2017

In remote USV (Unmanned Surface Vehicle) maritime operation, the remote operation and control technic and autonomous control technic is required and the emergency mode algorithm is needed certainly for sailing and accomplishing various surveillance, reconnaissance, and underwater search missions of USV. In this paper, we review the countermeasures in emergency situation of the existing USV system (Barracuda) and propose the emergency mode algorithm considering the operation and control, and autonomous control level for the stable USV operation in case of emergency. We analyzed the autonomous control level in view of the mission complexity and environmental difficulty, and human interface, and verified the performance of the autonomous control level when we apply four emergency mode algorithms. It is expected that more stable and reliable operation and cotrol are possible if the proposed algorithm is applied to the environments requiring the various multi-mission USV sailing and mission achievement.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.63-68
• /
• 2017

SAR(Synthetic Aperture Radar) uses electromagnetic signals to acquire ground information and has been used for wide coverage reconnaissance missions regardless of weather conditions. However SAR is known to be vulnerable to interference signals by other communication devices or radar instruments and may suffer from undesirable performance degradations and image quality. In this paper, a modified Eigen-subspace based filter is proposed that can be easily applied to SAR images affected by interference signals. The method of constructing Eigen-subspace based filter is briefly described and various simulations are performed to show the performance of the interference mitigation process. The suppression filter is applied to a ALOS PALSAR raw data affected by interfering signals in order to verify its superiority over the Notch filter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.633-638
• /
• 2017

The small unmanned robot developed in this paper can perform tasks such as surveillance and reconnaissance in the battle field. The noise generated during the operation of the robot may expose the operation area. Therefore, in this study, we developed a method to quantitatively measure the noise of the developed small unmanned ground robot. The criteria for noise measurement in indoor and outdoor are presented. It was used for statistical verification method to verify the reliability of the developed noise measurement method. The noise was measured at different places, and the correlation was analyzed. Thus, we proposed a method to predict the noise level in the operation area where the robot is operated by the noise test data measured during the development process.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.57-67
• /
• 2015

In this paper, we proposed the geolocation method using target detection information in infrared images. Our method was applied to geolocation system of hostile targets in ground-to-ground field. The major distortion that has bad effect of geolocation was composed of optic, topography, GPS(Global Positioning System) and IMU(Inertial Measurement Unit) of reconnaissance unit. We proposed enhanced geolocation method to cope with optic and topography distortion using polynomial fitting and slant-range calculation model to overcome earth curvature problem, and the result showed that the performance of our method was good for system requirements.

• Journal of Sensor Science and Technology
• /
• v.23 no.6
• /
• pp.377-382
• /
• 2014

Detecting and segmenting diffuse targets in laser ranging data is a critical problem for tactical reconnaissance. In this study, we propose a new method that facilitates the characterization of diffuse irregularly shaped objects using "spin images," i.e., local 2D histograms of laser returns oriented in 3D space, and a clustering process. The proposed "cluster-based spin imaging" method resolves the problem of using standard spin images for diffuse targets and it eliminates much of the computational complexity that characterizes the production of conventional spin images. The direct processing of pre-segmented laser points, including internal points that penetrate through a diffuse object's topmost surfaces, avoids some of the requirements of the approach used at present for spin image generation, while it also greatly reduces the high computational time overheads incurred by searches to find correlated images. We employed 3D airborne range data over forested terrain to demonstrate the effectiveness of this method in discriminating the different geometric structures of individual tree clusters. Our experiments showed that cluster-based spin images have the potential to separate classes in terms of different ages and portions of tree crowns.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.151-156
• /
• 2018

Military robots are expected to play an important role in the future battlefield, and will be actively engaged in dangerous, repetitive and difficult tasks. During the robots perform the tasks a human operator controls the robots in a supervisory way. The operator recognizes battlefield situations from remote robots through an interface of the operator control center, and controls them. In the meantime, operator workload, controller interface, robot automation level, and task complexity affect robot operability. In order to assess the robot operability, we have developed ROSim (Robot Operational Simulator) incorporating these operational factors. In this paper, we introduce the results of applying ROSim experimentally to the assessment of reconnaissance robot operability in a battle field. This experimental assessment shows three resulting measurements: operational control workload, operational control capability, mission success rate, and discuss its applicability to the defense robot research and development. It is expected that ROSim can contribute to the design of an operator control center and the design analysis of a human-robot team in the defense robot research and development.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.