• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.469-485
• /
• 2004

The purpose of this study is to investigate the hydrochemical characteristics of groundwater in the Umsung area, and to elucidate the effect of host rock type, well depth and mineralization zone on the groundwater chemistry. The geology of the study area consists of Jurassic granite and Cretaceous sedimentary rocks, which are bounded by a fault. Most of shallow groundwaters exploited in the Jurassic granite area are used for agricultural purpose, whereas the deep groundwaters in the Cretaceous sedimentary rocks are used for a drinking water. The shallow groundwater shows weak acidic pH, the electrical conductivity ranging from $142\;to\;903\;{\mu}S/cm$, and the chemical type of $Ca-HCO_3\;to\;Ca-Cl(SO_4,\;NO_3)$. A few of shallow groundwaters are contaminated by nitrate, and show high concentration of Fe, Mn and Zn, that reflects the effect of a mineralization zone. The deep groundwater shows neutral to weak alkaline pH, higher electrical conductivity than that of shallow groundwater, and the chemical type of $Ca-HCO_3$. The seepage water from the abandoned mines does not have the characteristics such as acidic pH, high concentration of heavy metals and high sulfate content. The hydrogen and oxygen isotopes of groundwater indicates an altitude effect of the recharge area between deep groundwater and shallow groundwater. In conclusion, the chemical composition of groundwater complicately reflects the effects of their host rocks, well depth, agricultural activity and mineralization zone in the study area.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.86-97
• /
• 2007

The principal component analysis was performed to identify the general characteristics of groundwater level changes from 202 deep and 112 shallow wells monitoring data, respectively, which came from the National Groundwater Monitoring Stations operated by KWATER with time spans of 156 continuous weeks from 2003 to 2005. Eight principal components, which accounted for 80% of the variability of the original time series, were extracted for water levels of shallow and deep monitoring wells. As a result of cluster analysis using the loading value of three principal components for shallow wells, shallow monitoring wells were divided into 3 groups which were characterized with a response time to rainfall (Group 1: 4.6 days, Group 2: 24.1 days, Group 3: 1.4 days), average long-term trend of water level (Group 1: $2.05{\times}10^{-4}$ m/day, Group 2: $-7.85{\times}10^{-4}$ m/day, Group 3: $-3.51{\times}10^{-5}$ m/day) and water level difference (Group 1 < Group 2 < Group 3). Additionally, they showed significant differences according to a distance to the nearest stream from well (Group 3 < Group 2 < Group 1), topographic slope of well site (Group 3: plain region, Group 1: mountainous region) and groundwater recharge rate (Group 3 < Group 2 < Group 1) with a p-value of 0.05.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.31-44
• /
• 2012

Seasonal changes in groundwater geochemistry exist in Ddan-sum island. In the farming season of April, the spatial distribution of ions explains that $Fe^{2+}$, Fe(total), $Mn^{2+}$, $Ca^{2+}$, $Mg^{2+}$, $SiO_2$, ${HCO_3}^-$, and ${NO_3}^-$ are high in the center of the island, but $Na^+$ and $K^+$ are relatively low and these high anions indicates the effect of fertilizer used for strawberry cultivation. Spatial variation of ion concentration is smaller in August than April because of low agricultural activity and heavy rainfall. Geochemical type of groundwater shows that the center of island has the characteristics of recharge zone but the rim area corresponds to a mixing zone between groundwater and stream water. According to the analysis of saturation index for Fe and Mn ions, hematite, goethite, and rhodochrosite under supersaturation have a possibility of additional mineral deposition, and siderite, $Fe(OH)_3$, manganite, pyrolusite, and pyrochroite under unsaturation may exist as a type of dissolved ion.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.71-88
• /
• 2003

The DRASTIC system is widely used for assessing regional groundwater pollution susceptibility by using hydrogeological factors such as depth to water, net recharge, aquifer media, soil media, topography, vadose zone media, hydraulic conductivity. This study is providing Modified Drastic Model to which lineament density, land use, influence of groundwater drawdown caused by tunnel excavation are added as additional factors using geographic information system, and then to evaluate groundwater contamination potential of ${\bigcirc}{\bigcirc}$ area. For statistical analysis, vector coverage per each factor is converted to grid layer and after each correlation coefficient between factors, covariance, variance, eigenvalue and eigenvector by principal component analysis of 3 direction, are calculated, correlation between factors is analyzed. Also after correlation coefficients between general DRASTIC layer and rated lineament density layer, between general DRASTIC layer and rated land use layer, between general DRASTIC layer and rated tunnel excavation influence layer are calculated, final modified DRASTIC model is constructed by using them with each weighting. When modified DRASTIC model was compared with general DRASTIC model, contamination potential in modified DRASTIC model is fairly detailed and consequently, vulnerable area which has high contamination potential could be presented concretly.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.384-384
• /
• 2011

전 세계적으로 유역단위 수문해석 모형으로 많이 사용되는 SWAT모형은 유역 내 수문 모의시, DEM을 기반으로 유역 평균경사도를 이용하여 경사도-경사장 관계식 산정 경사장을 유역 내모든 수문학적 반응단위(HRU:Hydrologic Response Unit)에 동일하게 적용하는 문제점이 있다. 특히 SWAT모형은 미국지형 기반으로 개발되었기 때문에 유역 평균 경사도가 25% 미만일 경우 유역 평균 경사장 인자가 매우 작은 값으로 산정되어 모두 동일하게 적용된다. 이는 SWAT모형의 수문 및 지하수 함양량 산정 시 우리나라 유역 특성이 제대로 반영되지 않는 채 모의가 이루어질 수 있는 문제를 초래할 수 있다. 따라서 이러한 문제점을 해결하기 위하여 본 연구에서는 강원 발전연구원에서 전수 조사한 실측 경사장 자료가 있는 강원도 양구군 해안면 만대천 유역을 연구 대상지역으로 선정하였고 지하수 함양량을 시공간적으로 분석 할 수 있게 개발 된 SWAT HRU Mapping module에 실측 경사장 자료를 이용하여 2009년 실측 경사장(274m) 적용과 임의의 경사장(5m) 적용에 따른 유출량 및 지하수 함양량을 비교 분석 하였다. 임의의 경사장을 5m로 선정한 이유는 SWAT모형에서 소유역의 경사도가 25%이상일 경우 소유역의 경사장을 모두 0.05m로 산정하여 모두 동일하게 적용하기 때문에 실측 경사장(평균 274m)과 대조군으로 비교하기 위하여 임의의 경사장을 5m로 선정하였다. 2009년 해안면 만대천 유역의 총 강우량은 1341mm이며 실측경사장 및 임의 경사장 적용에 따른 유출특성별 유출량을 비교해보면 직접유출 결과는 두 가지 경사장 모두 큰 차이를 나타내지 않았지만 평균 경사장이 증가 할수록 중간유출은 줄어들고 기저유출이 급격하게 증가하는 것으로 분석되었다. 또한 2009년 만대천 유역의 월별지하수 함양량은 실측경사장과 임의의 경사장 적용에 따라 각각 591mm/yr(함양율 44%) 와 293mm/yr(함양율 22%) 로 나타났으며, 중간유출이 줄고 기저유출이 증가 할수록 지하수함양량 역시 증가 하는 것으로 나타났다. 따라서 SWAT모형에서 기저유출을 정확히 해석하고 지하수함양량을 제대로 산정하기 위해서는 실측 경사장에 적용에 따른 모형의 검 보정이 반드시 이루어져야 한다고 판단된다.

• Journal of Korea Water Resources Association
• /
• v.51 no.6
• /
• pp.515-521
• /
• 2018

Seawater intrusion areas were calculated in Yeosu region considering sea level rise and the effects of countermeasures for seawater intrusion were analyzed using SEAWAT program. The estimated seawater intrusion area was $14.90km^2$ in 2015. When we applied climate change scenarios the area was changed to $19.19km^2$ for RCP 4.5 and $20.43km^2$ for RCP 8.5 respectively. The mitigation effects by artificial recharge with total $50m^3/d$, $100m^3/d$, and $300m^3/d$ are from 3.75% to 10.68% for RCP 4.5, and from 5.82% to 10.77% for RCP 8.5 respectively. If we install barrier wall with the thickness 0.8 m, 1.3 m, and 1.8 m, the mitigation effects are from 6.67% to 12.04% for RCP 4.5, and from 6.17% to 14.98% for RCP 8.5 respectively. The results of this study can be used to be a logical means of quantitative grounds for policy decisions to prevent groundwater contamination by seawater intrusion and subsequent secondary damage in coastal areas.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.99-104
• /
• 2009

For recycling of waste foundry sands, researchers recently try to recycle them rather than depend on reclamation, and are studying on how to combine waste foundry sands with cement and use them for various kinds of construction material as the effective recycling method of waste foundry sand. In this research, The ways to find the proper replacement rate of waste foundry sands and to make use of them were suggested through the experiments on the range to apply waste foundry sands with two levels of 1:3 mixture rate of W/C 43% and 50%. The research result showed that in terms of liquidity as the characteristic of unhardened mortar, as the replacement rate of waste foundry sands increased, its flow tended to decrease. The amount of air also displayed a similar tendency to that of liquidity in that the higher the replacement rate of waste foundry sands became, the lower it became. With regard to the solidity trait of hardened mortar, it increased when the waste foundry sands were replaced more, and the replacement of waste foundry sands caused increased initial solidity. As for the amount of water permeated and that of water absorbed as the water tight proofing properties, the amount of permeated water was proved to decrease because of the gap recharge effect by the fine powder of waste foundry sands, and the replacement of waste foundry sands in the structures requiring watertightness is concluded to be very effective.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.499-508
• /
• 2004

Changwon City first constructed riverbank filtration plants in Book-Myeon and Daesan-Myeon in Korea in the year 2001. This study evaluated hydrogeological characteristics and groundwater flow simulation between the Nakdong River and the fluvial aquifers adjacent to the river in Book-Myeon, Changwon City. The groundwater simulation calculated the influx rate from the Nakdong River and the fluvial aquifers to pumping wells through the riverbank filtration system. The groundwater flow model utilized drilling, grain size analysis, pumping test, groundwater level measurements, river water discharge and rainfall data. Hydraulic heads calculated by the steady-state model closely matched measured heads in pumping and observation wells. According to the transient flow model, using a total pumping amount of 14,000 $m^3$/day, the flux into the pumping wells from the Nakdong River accounts for 8,390 $m^3$/day (60%), 590 $m^3$/day (4%) is from the aquifer in the rectilinea. direction to the Nakdong River, and 5,020 $m^3$/day (36%) is from the aquifer in the parallel direction to the Nakdong River. The particle tracking analysis shows that a particle from the Nakdong River moves toward the pumping wells at a rate of about 1.85 m/day and a particle from the aquifer moves toward the pumping wells at a rate of about 0.75 m/day. This study contributes to surface water/groundwater management modeling, and helps in understanding, how seasonal change affects pumping rates, water quality, and natural recharge.

• The Journal of Engineering Geology
• /
• v.21 no.2
• /
• pp.125-131
• /
• 2011

The discharge characteristics of the Seodo Mulgol Spring-the only groundwater-producing area in Dokdo-were evaluated by measurements of discharge rate and electrical conductivity (EC) on five occasions. The Seodo Mulgol Spring is fed by rainfall in upstream areas of the Mulgol cave, and the rainwater of the area moves down along cooling joints developed in trachyandesite II and trachyte, finally discharging at the Mulgol cave. The discharge rate of the Seodo Mulgol Spring varied from 1.12 to 7.02 $m^3/d$ during the study period and EC varied from 2,650 to 3,390 ${\mu}S/cm$, showing a sharp increase during heavy rainfall. The observed variations in discharge rate and EC at the Seodo Mulgol Spring are attributed to the relatively short distance between the recharge area and the Mulgol cave, and to the rapid movement of groundwater through columnar joints developed in trachyandesite II and trachyte. Additional discharge measurements, combined with precise rainfall data, are required at Dokdo to elucidate the discharge characteristics of the Seodo Mulgol Spring.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.415-418
• /
• 1999

The characteristics of VRLA (valve regulated Iead-acid) battery with the tubular positive plate and gel type electrolyte were examined as a function of active material filling density. The filling density of positive plate was 3.2 g/mL, 3.4 g/mL, and 3.6 g/mL, respectively. These VRLA batteries were cycled with 100% DOD (depth of discharge) at the $C_5/5$ rate, followed by IU-type recharge with $I_{max}=0.2C_{10}/10$ and a final voltage V=2.40 V/cell. The test was performed in a thermostatic room at $25{\pm}1^{\circ}C$. The result indicated that the initial capacity was independent of active material filling density, i.e., the highest initial capacity was 3.4 g/mL of filling density and the lowest was 3.6 g/mL. On aspect of the cycle-life performance of the VRLA battery, the filling density of 3.6 g/mL was similar to that of 3.4 g/mL in the positive plate, and both were higher than that of 3.2 g/mL. Water-loss and degradation of the VRLA battery were decreased according to an increase of the filling density in the positive plate. The optimum filling density of the active material was 3.4~3.6 g/mL.