• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.211-219
• /
• 2014

Closed cracks are difficult to detect using conventional ultrasonic testing because most incident ultrasound passes completely through these cracks. Nonlinear ultrasound inspection using sub-harmonic frequencies a promising method for detecting closed cracks. To implement this method, a sub-harmonic phased array (PA) is proposed to visualize the length of closed cracks in solids. A sub-harmonic PA generally consists of a single transmitter and an array receiver, which detects sub-harmonic waves generated from closed cracks. The PA images are obtained using the total focusing method (TFM), which (with a transmitter and receiving array) employs a full matrix in the observation region to achieve fine image resolution. In particular, the receiving signals are measured using a laser Doppler vibrometer (LDV) to collect PA images for both fundamental and sub-harmonic frequencies. Oblique incidence, which is used to boost sub-harmonic generation, inevitably produces various surface waves that contaminate the signals measured in the receiving transducer. Surface wave interference often degrades PA images severely, and it becomes difficult to read the closed crack's position from the images. Various methods to prevent or eliminate this interference are possible. In particular, enhancing images with signal processing could be a highly cost-effective method. Because periodic patterns distributed in a PA image are the most frequent interference induced by surface waves, spatial frequency filtering is applicable for removing these waves. Experiments clearly demonstrate that the spatial frequency filter improves PA images.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.365-377
• /
• 2006

We define the incomplete medium sharing system as a multi-channel shared medium communication system where any types of constraints are imposed to the set of channels that may be allocated to any transmitter-receiver node pair. A set of distributed MAC schemes are proposed, all of which are based on the CSMA/CA scheme employed in IEEE 802. 11 WLAN standards. Distributed MAC schemes are proposed in three different forms, which can be differentiated by the number and the location of back-off timers; that is, (1) one timer for all queues destined for different receiver nodes, (2) multiple timers at individual transmission queues, (3) multiple timers for individual channels. Through an extensive set of computer simulations, the performances of the proposed MAC schemes show that the MAC scheme with timers at individual transmission queues outperform the others in terms of throughput and delay for most cases considered. The complexity of the proposed schemes is also compared, and the first scheme obviously turned out to be the simplest, and the complexity of the second and third schemes depends on the number of receiver nodes and the number of channels, respectively.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1564-1570
• /
• 2004

Recently, The Analog TV has been being replaced by digital TV. This dues to the advantage of digital TV that sends data as well as audio/video stream to the receiver. But there are no standards or rules for processing the data. So, most companies or developers process the data in separate methods. This absence of standards or rules for processing the data causes many confusions and waste of time, money, man power. This Thesis proposes the solution of the problem not based on standardized respect but methodological respect. This solution is using XML in producing and playing the broadcasted multimedia contents and data. We believe that this solution saves much man power, time, money and increase reusability of expensive broadcasting contents.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.43-48
• /
• 2016

One of the main problems with gaseous fire extinguishers is the decrease in fire suppression capability due to the leakage of the fire extinguishing agents, either naturally or caused by obsolete equipment. Therefore, in this study, a real-time detector module for monitoring pressure leakages was developed and an assessment on its performance was carried out. Currently, there are no domestic or global standards for testing pressure leakage detection systems. Therefore, similar global standards, such as ISO 7240 and FM 1421, and the domestic law on "Receiver type-approval and technical standards for product inspection" were used as a reference for assessing the performance of the newly developed module. Its basic performance was assessed by applying compressed air to the module, and, as a result, the minimum working pressure was identified as 0.3 bar. Its environmental qualification was carried out to confirm the proper functioning of the module in different climates and the module was confirmed to function properly at both high ($50^{\circ}C$) and low ($-10^{\circ}C$) temperatures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.4
• /
• pp.25-31
• /
• 1994

A system for EMAT, which generates ultrasound by electro-magnectic forces and performs nondestructive testing in noncontact, was established. By linking it with a 3 axis scanning system and a data acquisition and processing system the automation of EMAT testing was attempted. A EMAT sensor was fabricated and the directivity pattern of it was measured. To be suitable automation, it has a transmitter and a receiver in one case and the main beam direction of it can be controlled by the frequency of driving signal. A program which controls the EMAT system, the 3 axis scanner and the data acquisition and processing system was developed. It also processes acquired data and displays the processing results. IBM-PC/AT compatible PC was used as main controller and the stratage of the program is emulation of real devices on the PC monitor. To provide the performance of the established EMAT system, two aluminium blocks containing artificial flaws and a welded aluminium block were tested. The result of the tests were satisfactory.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.400-408
• /
• 2018

Wide area augmentation system is a system that generates and transmits correction and Integrity information for use in wide area. Typical system is SBAS. In the United States, it operates under the name WAAS, EGNOS in Europe, MSAS in Japan, SDCM in Russia, GAGAN in India. it is developing Korean SBAS which named KASS by 2022 in Korea. SBAS is a standard System that is operated as civil aviation service base and set as international standards by ICAO. So the correction data can only is used for civil SPS receiver. In this paper, we discuss C1P1 DCB estimation which need to use SPS correction service for PPS receiver. Then we analyze C1P1 DCB correction effect under standalone Satellite Navigation and method to use PPS receiver under SPS DGPS. Finally we organize wide area augmentation system for PPS receiver and analysis performance.

• The Journal of Information Technology
• /
• v.4 no.4
• /
• pp.25-35
• /
• 2001

This paper presents a digital signature scheme for document image which directly embeds a signature onto the document. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and transfers it and the receiver makes a check of any forgery on the signature and the document, This scheme is compatible with the ITU-T.4(CCITT G3 or G4 facsimile standards).

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.144-150
• /
• 2006

A serious problem with traditional 'command & control' spectrum management techniques is that they do not easily accommodate new technologies and new services. This paper describes the necessary principles of flexible-use spectrum rights which may allow a wide variety of spectrum uses in a single general-purpose band. Based on the electrospace description of the radio spectrum, these principles allow general aggregation or division of licensed electrospace regions via secondary markets, providing rules for how regulatory limits change under aggregation or division. These flexible-use principles limit transmitter behaviors that tend to create a more difficult operating environment for receivers, while making receivers responsible for handling any remaining interference. The author shows how flexible-use principles could provide a basis for real-world flexible-use frequency bands.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.76-81
• /
• 2011

Fossil fuel, the energy source of internal combustion engine automobiles, is limited in resource and has caused environmental issues for decades. Accordingly, automobile manufacturers from many countries around the world are developing or producing eco-friendly vehicles that utilize alternative sources of energy. These vehicles are equipped with many electronic and electrical components which operate on high voltage and/or large current that were not used in conventional combustion engine automobiles. In this paper, in order to analyze the electro-magnetic interference noise, electric vehicles and fuel cell electric vehicles are tested under the guidelines of KMVSS (Korean Motor Vehicle Safety Standards) as well as under test modes that are not stipulated under the guidelines.