• Title/Summary/Keyword: receiver function

Search Result 443, Processing Time 0.028 seconds

Performance Analysis of Cooperative Diversity on the Usage of Opportunistic Relay (기회주의적인 중계기 사용에 대한 협력 다이버시티의 성능 분석)

  • Kim, Tae-Wook;Kong, Hyung-Yun
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.14 no.3
    • /
    • pp.7-12
    • /
    • 2014
  • The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.

A Real Time Sensing Through The Eigenvalue Detection in Cognitive Radio (Cognitive Radio 환경에서 고유치 값 검출을 통한실시간 센싱 방법)

  • Sohn, Sung-Hwan;Jang, Sung-Jeen;Kim, Jae-Moung
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.3
    • /
    • pp.1-7
    • /
    • 2010
  • Cognitive Radio, which adaptively utilizes the vacant licensed spectrum band, is considered as an effective way to alleviate the scarcity of spectrum resource shortage. In order to guarantee the non-interference transmission of primary system, spectrum sensing, especially in quiet period, is proposed. However, it is insufficient to avoid the unacceptable interference caused by Cognitive Radios, because the primary user may appear anytime that is unpredictable. In this paper, we address the deficiency of conventional spectrum sensing and propose a novel Cognitive Radio receiver structure with monitoring function block to detect the appearance of primary user in a real-time manner. Simulations prove that the proposed eigenvalue based detection method together with the two-threshold decision procedure performs properly.

Analysis of free field for Acoustic Anechoic Chamber based on Time Stretched Pulse (Time Stretched Pulse를 이용한 무향실 자유음장 분석)

  • Kim, Keon-Wook
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.49 no.4
    • /
    • pp.111-119
    • /
    • 2012
  • Time Stretched Pulse (TSP) is used for transmitting and analyzing the impulse signal over the designated spatial place. However, if transfer functions of transmitter and receiver are unknown, performance investigation of free field in temporal domain is barely possible due to the overlap between the direct and indirect signal from the space. Generally, the free field or hemi-free field is evaluated by the Annex A of ISO 3745 in which utilizing the inverse square law with one-third octave band signals. In this paper, the author performs analysis of free field via applying TSP with inverse square law and the results are compared with the one-third octave band signals. According to the analysis of deviation between the corresponding signal and inverse square law model, the proposed TSP method provides the comparable performance index to the one-third octave band signal with reduced measuring time. Provided that the pre-whitening can be implementable by employing the speaker and microphone transfer function, further analyses from TSP compression are able to be performed such as multipath separation from time domain data. The anechoic chamber used in this experiment is verified conformance with ISO 3745 for free field and hemi-free field condition for limited frequency of the signal.

Economic Analysis of Optical Communication Control System in High Voltage Magnetizer (고전압 착자기에서의 누전 사고 방지를 위한 광통신 제어시스템의 도입 방안과 경제성 분석)

  • Bae, Young Woo;Kim, Wooju;Hong, June Seok
    • Journal of Information Technology Applications and Management
    • /
    • v.26 no.6
    • /
    • pp.103-117
    • /
    • 2019
  • Demand for high power motors is rapidly increasing as the 4th industry and convergence technology has recently emerged. In order to produce high-strength permanent magnets, the magnets used for magnetization have been increased from DC 300V in the 1970s to DC 2.5kV in the 2010s, Up to DC 10kV in the 2030s, It is expected that higher voltage will be used to magnetize. However, in the case of a magnetizer using an existing electric signal control device, it is necessary to use a control device with a high-voltage insulation function in case a high voltage used for magnetization is leaked to the control device. If a short circuit accident occurs, the controller must be shut down and serious problems such as excessive repair costs arise. In this study, a control system adopting optical communication method instead of electric signal control method is proposed to prevent leakage currents in high-voltage magnetizer. We design a transmitter(Tx) and a receiver(Rx) device for the optical communication control device and implemented a prototype connecting the optical cable. In order to demonstrate the utility of high-voltage magnetizer using the optical communication control device, we analyzed the initial cost and the yearly cost for the years to analyze the net present value. As a result, In the case of the low-voltage magnetizer, the electric signal control method cost less, As the operating voltage of the magnetizer becomes higher. It is confirmed that it takes less cost when the optical communication control device is used.

A Joint SD-MRC Method for Downlink Performance Improvement at Coverage Boundaries of Cellular Systems (셀룰러 시스템의 셀 경계에서의 하향 링크 성능 향상을 위한 Joint SD-MRC 수신 방식)

  • Lee, Sang-Dae;Chang, Jae-Won;Sung, Won-Jin
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.5
    • /
    • pp.506-514
    • /
    • 2008
  • At coverage boundaries of cellular systems including the recent WiBro standard which operate with full frequency reuse for increased spectral efficiency, interference signals from the base stations(BS) of adjacent cells degrade the receiver performance. In this paper, a detection method for multiple-antenna mobile stations(MS) is proposed for downlink performance improvement at coverage boundaries of cellular systems. For the performance verification, we obtain the probability density function(pdf) of the effective signal-to-interference and noise ratio(SINR) according to the variation of the interference signals from adjacent cells as well as the number of MS antennas, and calculate the transmission efficiency. We also verify the performance of proposed method with simulation results, to demonstrate a significant performance improvement is achieved over the maximal ratio combining(MRC) and spatial demultiplexing(SD) methods in terms of the effective SINR and the spectral efficiency.

Analysis of Cross-Correlation of Extended Non-Linear Binary Sequences (확장된 비선형 이진수열의 상호상관관계 분석)

  • Choi, Un-Sook;Cho, Sung-Jin;Kwon, Sook-Hi
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.7 no.2
    • /
    • pp.263-269
    • /
    • 2012
  • Code-Division Multiple-Access(CDMA) allows several users simultaneous access to a common channel by assigning a distinct pseudonoise sequence called spectrum code to each user. Each user in a CDMA system uses a assigned spectrum code to modulate their signal. Choosing the codes used to modulate the signal is very important in the performance of CDMA systems. The best performance will occur when there is good separation between the signal of a desired user and the signals of other users. The receiver synchronizes the code to recover the data. The use of an independent code allows multiple users to access the same frequency band at the same time. In this paper we propose a generalized model of non-linear binary sequence using trace function and analyze cross-correlation of these sequences. These sequences with low correlation, large linear span and large family size, in a direct-sequence spread spectrum communication system, help to minimize multiple access interference, increase security degree of system and enlarge user number.

Premature Ejaculation and Erectile Dysfunction in Iranian Prostate Cancer Patients

  • Lin, Chung-Ying;Burri, Andrea;Pakpour, Amir H
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.17 no.4
    • /
    • pp.1961-1966
    • /
    • 2016
  • Background: To investigate the prevalence of premature ejaculation (PE) and erectile dysfunction (ED) in a sample of patients with prostate cancer and to determine the utility of the previously suggested cutoffs of the Premature Ejaculation Diagnostic Tool (PEDT) for the diagnosis of PE and that of International Index of Erectile Function (IIEF-5) for ED. Materials and Methods: A total of 1,202 men with prostate cancer were invited from urology clinics at the universities of Iran, Tehran, Qazvin, Ahvaz, Guilan and Tabriz. Clinical characteristics were collected through medical records. PE and ED diagnoses were made by trained urologists. In addition to the clinical diagnoses, PE and ED were measured through self-report using the PEDT and the IIEF-5. Questionnaire cutoff scores were determined using receiver operating characteristic (ROC) curves and confirmed by predictive ability using logistic regression. Results: The prevalence of PE was 63.7% and that of ED was 66.2%. Prevalences of PE decreased and that of ED increased with advanced TNM stages. According to ROC, the suggested cutoff for the PEDT to diagnose a PE was ${\geq}11$ (sensitivity=0.988, 1-specificity=0.084, and predictive ability=0.914) and ${\leq}17$ for the IIEF-5 (sensitivity=0.966, 1-specificity=0.031, and predictive ability=0.967). Conclusions: Prevalence of sexual problems was high in prostate cancer patients in Iran, therefore oncologists should take into account these potential problems when deciding on treatment modalities.

Estimation of a transition point of sound propagation condition using transmission loss data measured in SAVEX15 (SAVEX15 실험 해역에서 측정된 전달손실 자료를 이용한 음파 전달 조건의 변환점 추정)

  • Kwon, Hyuckjong;Choi, Jee Woong;Kim, Byoung-Nam
    • The Journal of the Acoustical Society of Korea
    • /
    • v.37 no.1
    • /
    • pp.1-11
    • /
    • 2018
  • Sound propagation in shallow water changes from spherical spreading to cylindrical spreading, depending on boundary conditions, and this point is defined as a transition point of the sound propagation condition. Theoretically, the transition point can be estimated using the transmission loss as a function of source-receiver range. In this paper, the transmission loss curve in a Pekeris waveguide is predicted using a parabolic-equation based acoustic propagation model and using this transmission loss curve, the range from the source of the transition point is estimated, which is compared to the critical distance calculated using the sound speed ratio of water to sediment. In addition, the effects of the sound speed profile and source depth change on the transition point are investigated. Finally, the transition point is estimated using the transmission loss data measured during the period of the SAVEX15 (Shallow Water Acoustic Variability EXperiment 2015) conducted 65 km southwest of Jeju Island in May 2015, and it is compared to the ocean environmental parameters to understand the properties of sound propagation in the experimental area.

A study on the multiband interpolant filter for the second-order BPS system (2차 BPS 시스템을 위한 다중 대역 interpolant 필터 설계에 대한 연구)

  • Kim, Hyuk;Baek, Jein
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.10a
    • /
    • pp.69-72
    • /
    • 2012
  • In the bandpass sampling(BPS), the sampling frequency is lower than the frequency of the RF(radio frequency) signal being sampled. In this method, the baseband spectrum directly appears by the sampling itself, so that it is not necessary to use any down converter, making the receiver's hardware simpler. The second-order BPS uses two identical BPS samplers operating with an offset timing to each other. By a processing with their two sampled signals, it can be possible to cancel the aliasing or interference component if any due to the bandpass sampling. The interpolant filter, which is to manipulate the phase characteristics of the sampled signal, affects the performance of the cancellation. In this paper, a multiband interpolant filter is introduced, with which multiple interference signals from multiple RF bands can be cancelled simultaneously. We suggest several phase characteristics for the interpolant filter and have evaluated their performances through computer simulations. It has been shown that the filter with a continuous phase function gives the better performance.

  • PDF

A Research on the FCB Detection Algorithm for the GSM Mobile System (GSM 무선시스템에서 주파수정정 버스트 (FCB) 검출 알고리즘에 관한 연구)

  • 김범진;한재충;홍승억
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.24 no.12A
    • /
    • pp.1876-1882
    • /
    • 1999
  • In this paper, we have proposed a FCB detection algorithm for the GSM system which is european cellular standard. The detection algorithm can be implemented using received signal sampler, correlator, and post detection combiner. GSM mobile phone can use the proposed algorithm for detection of the Broadcasting Channel, and to obtain the initial timing estimate. The proposed algorithm has a architecture which is suitable for DSP or ASIC implementation, and required memory size is small. The performance of the algorithm is a function of the processing data window size and the threshold values. Proper window size and the threshold values can be determined by analyzing the correlator and combiner. The proposed algorithm has been implemented using DSP, and the performance was verified using baseband simulation. The simulation assumed frequency offset values of 0ppm and 15ppm with the receiver filter bandwidth set at both minimum and maximum. It is shown that the algorithm is robust under various assumptions, and suitable for real implementations.

  • PDF