• The Korean Journal of Emergency Medical Services
• /
• v.16 no.1
• /
• pp.7-18
• /
• 2012

Purpose: The purpose of this study is to help care workers to do their best as first respondents by analysing their recognition, knowledge, and self-efficacy on basic CPR (cardiopulmonary resuscitation) that is directly connected to the lives of patients and thus their education and methods can be improved for their positive basic lifesaving work. Method: For this purpose 360 structured questionnaires were used to the subjects in the eastern area of Jeonnam province from June 20 to July 4, 2011. Of these questionnaires 217 were used excluding 113 incomplete, 27 error, and 3 male ones. The collected data were analysed by the real number, the percentage, the average, the standard deviation, t-test, ANOVA, and Tukey with SPSS WIN 18.0. Results: 1. In the view of subjects, those aged over 51 accounted for 96(44.2%) as the majority, high school graduates, 95(43.8%), worked for 1 or more than 1 year-less than 2 years, 66(30.4%), experienced to see persons collapsed losing their consciousness, 46(21.2%), took the education, 184(85.7%), had 1 session of education, 80(43%), got the last education for 2 or more than 2 years 68(37%), and practiced through mannequin for the education aids, 86(46.7%). 2. There was significant difference in the view of recognition with the length of work (p=.010) and experienced to see persons collapsed losing their consciousness (p=.020), in the view of knowledge with academic background (p=.040) and the length of work, and in the view of self-efficacy with academic background (p=.002), the length of work (p=.010) and experienced to see persons collapsed losing their consciousness (p=.000). 3. There was significant difference in the session of education (p=.000), last education (p=.025) and education aids for basic CPR. Self-efficacy had significant difference according to the session of education for basic CPR (p=.001) and the time of education (p=.000). 4. There was correlation between recognition and self-efficacy (r=.41). The higher the recognition is, the better the self-efficacy improves. However the correlation between knowledge and self-efficacy was so low that the former did not have influence on self-efficacy. Conclusions: It needs to offer education to the lifesaving workers based on their experiences. If there is education more than 2 sessions in a year with mannequin and the simulation providing sufficient hours, care workers' recognition would be increased resulting in higher self-efficacy and thus they could keep the role of active lifesaving worker at the first practical site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.15-23
• /
• 2017

This paper reports a SOC(State-of-Charge) estimation method using the extended Kalman filter(EKF) algorithm, which can allow real-time implementation and reduce the error of the model and be robust against noise, to accurately estimate and evaluate the charging/discharging state of the EV(Electric Vehicle) battery. The battery was modeled as the first order Thevenin model for the EKF algorithm and the parameters were derived through experiments. This paper proposes the changed method, which can have the SOC to 0% ~ 100% regardless of the aging of the battery by replacing the rated capacity specified in the battery with the maximum chargeable capacity. In addition, This paper proposes the EKF algorithm to estimate the non-linearity interval of the battery and simulation result based on Ah-counting shows that the proposed algorithm reduces the estimation error to less than 5% in all intervals of the SOC.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.151-160
• /
• 1998

실시간 교통정보 처리과정은 현장설비로부터 수집되는 각종 교통상황자료를 분석/처리하여 소통상황, 주행속도, 통행시간 등의 교통상황을 단기 예측하는 과정으로서 이는 주행안내시스템의 핵심요소기술이다. 주행안내 시스템 개발의 필요성은 선진국을 중심으로 제기되어 왔으며, 주행안내시스템은 각국 정부의 강력한 지원정책을 바탕으로 연구개발 단계를 거쳐 시범운영의 단계에 있다. 국내에서도 교통정체의 해소와 안전주행의 연구개발 단계를 거쳐 시범운영의 단계에 있다. 국내에서도 교통정체의 해소와 안전주행의 여건마련을 위하여 교통정보를·처리·제공하는 기술의 개발이 활발하게 진행되고 있다. 그러나 국내 기술수준을 보면 전자통신기술을 바탕으로 교통정보의 수집과 제공에 관한 연구는 어느 정도 진행되고 있으나 운전자가 필요로 하는 교통정보의 분석과 처리에 관한 연구는 매우 저조한 실정이다. 본 연구의 목적은 다양한 시스템에서 수집되는 자료를 종합적으로 처리, 저장,관리하고 이의 분석결과를 제공하는 교통정보센터의 프로토타입(Prototype)을 설정하는 것이다. 이러한 목표를 수행하기 위해서 요구되는 교통정보실험실의 기능은 수집된 교통자료의 신뢰성 분석, 교통정보의 종합적인 처리·저장·관리, 그리고 교통정보의 제공은 구분할 수 있다. 따라서, 현재 교통정보실험실에서 운영중인 정보의 형태를 제시하며, 이들 정보의 신뢰성을 실측자료와 비교한 실험적 결과를 예시한다. 또한, 개별 정보이용자에게 실시간 교통정보를 제공하기 위한 통신기술의 검토가 이루어진다. 차내 이용자에게 정보를 실시간으로 제공하기 위해서는 궁극적으로 무선통신기술의 응용이 필요하며, 정보이용자에게 다양한 정보를 제공하기 위해서 인터넷 통신과 연계시키는 것이 합리적으로 판단된다. 결론 부분에서는 교통정보실험실의 기능을 강화시키기 위한 향후의 연구과제를 제시한다.Si결정의 크기를 비교하였을 때 45$\mu\textrm{m}$ 이하의 분말을 섞어 압출하였을 때 가장 작은 초정 Si입자 크기를 얻음 을 볼 수 있었다. 주의 Fairfax County에 소재한 주간 고속도로 66번(I-66)과 인접 교통망의 교통자료를 사용하여 각종 돌발교통 혼잡 상황을 전제로 한 Traffic Simulation과 정보제공시나\리오를 INTEGRATION Model을 이용해 실행하였다. 그 결과 적응형 알고리즘이 개개인의 최단시간 경로를 제공하는 사용자 평형 경로안내전략에 비해 교통혼잡도와 정체시간의 체류정도에 따라 3%에서 10%까지 전체통행시간을 절약할 수 있다는 결론을 얻었다.출발참, 구성대외개방선면축심, 실현국제항선적함접화국내항반적전항, 형성다축심복사식항선망; 가강기장건설, 개피포동제이국제기장건설, 괄응포동개발경제발전적수요. 부화개시일은 각 5월 26일과 5월 22일이었다. 11. 6월 중순에 애벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as com

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.119-130
• /
• 2003

SP data have been widely used in assessing new transport policies and transport related plans. However, one of criticisms of using SP is that respondents may show different reaction between hypothetical experiments and real life. In order to overcome the problem, combination of SP and RP data has been suggested and the combined methods have been being developed. The purpose of this paper is to suggest a new SP and RP combined method using error component method and to verify the method. The error component method decomposes IID extreme value error into non-IID error component(s) and an IID error component. The method estimates both of component parameters and utility parameters in order to obtain relative variance of SP data and RP data. The artificial SP and RP data was created by using simulation and used for the analysis, and the estimation results of the error component method were compared with those of existing SP and RP combined methods. The results show that regardless of data size, the parameters of the error component method models are similar to those assumed parameters much more than those of the existing SP and RP combined models, indicating usefulness of the error component method. Also the values of time for error component method are more similar to those assumed values than those of the existing combined models. Therefore, we can conclude that the error component method is useful in combining SP and RP data and more efficient than the existing methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1537-1542
• /
• 2011

This paper presents the power management strategies for a compound hybrid excavator. The compound hybrid excavator has been replaced the hydraulic swing motor to the electric swing motor. This excavator requires a proper control algorithm to regulate the energy flow between the mechanical coupling and the electric devices. The controller should improve fuel economy and maintain the super capacitor voltage within a proper range. A thermostat controller and ECMS controller are designed such that these objectives can be achieved. The thermostat controller regulates the power of the engine-assist motor on the basis of the super capacitor voltage, and the ECMS controller determines it using the real-time fuel minimization strategy based on the concept of equivalent fuel. Simulation results showed that by using the hybrid excavator, the fuel economy becomes about 20% higher than that obtained using the conventional excavator and that the ECMS controller outperforms the thermostat controller.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2008

According to recent frequent local flash flood due to climate change, the very short-term rainfall forecast using remotely sensed rainfall like radar is necessary to establish. This research is to evaluate the feasibility of GIS-based distributed model coupled with radar rainfall, which can express temporal and spatial distribution, for multipurpose dam operation during flood season. $Vflo^{TM}$ model was used as physically based distributed hydrologic model. The study area was Yongdam dam basin ($930\;km^2$) and the 3 storm events of local convective rainfall in August 2005, and the typhoon.Ewiniar.and.Bilis.collected from Jindo radar was adopted for runoff simulation. Distributed rainfall consistent with hydrologic model grid resolution was generated by using K-RainVieux, pre-processor program for radar rainfall. The local bias correction for original radar rainfall shows reasonable results of which the percent error from the gauge observation is less than 2% and the bias value is $0.886{\sim}0.908$. The parameters for the $Vflo^{TM}$ were estimated from basic GIS data such as DEM, land cover and soil map. As a result of the 3 events of multiple peak hydrographs, the bias of total accumulated runoff and peak flow is less than 20%, which can provide a reasonable base for building operational real-time short-term rainfall-runoff forecast system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.96-103
• /
• 2000

The voice traffic is one of the most important real-time objects in WATM(Wireless Asynchronous Transfer Mode) networks. In this paper, we propose a new MAC(Medium Access'Control) protocol for the efficienttransmission of voice traffic over WATM networks in the multimedia environment and compare the performanceto existing similar protocols. The new protocol separates the reservation slot period for voice and that for data toguarantee some level of QoS(Quality of Service) in voice traffic. This is denoted by a slot assignment functiondepending on the frame size. According to the characteristics of voice traffic which is repeatedly in silent states,the protocol allocates voice reservation request slots dynamically with respect to the number of silent(off state)voice sources and also sends the first block of talkspurt restarted after silent period with a reservation requestslot to reduce the access delay.The simulation results show that the proposed protocol has better performance than Slotted Aloha in bandwidthefficiency, and can serve a certain level of QoS by the given slot assignment function even when the number ofvoice terminals varies dynamically. This means we can observe that the new MAC protocol is much better thanthe NC-PRMA(None Collision-Packet Reservation Multiple Access) protocol.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.165-178
• /
• 2011

A gigantic ship is constructed by assembling various types of ship blocks, each block being made by cutting and piecing the steel-plates together. The steel-plate piling process as the initial stage of ship construction sorts and manages the steel-plates according to the ship blocks that the steel-plates are used to make. The steel-plate piling process poses some problems such as process delay due to piling errors, safety vulnerability due to the handling of extra heavy-weight objects, and the uncertainty of work plan due to lack of information management in the pile spaces. We constructed a steel-plate piling process system based on the context-aware computing to resolve such problems. We built simulation system that can simulate the piling process and then established a smart space within the system by using tags, sensors and a real-time location system in order to collect context information. Workers receive an appropriate or intelligent service from the system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.218-224
• /
• 2012

Recently, as the needs of developing the micro autonomous underwater vehicle (AUV) are increasing, the acquisition of the elementary technology is urgent. While they mostly utilizes information of the forward looking sonar (FLS) in conventional studies of the local path control as an elementary technology, it is desirable to use the obstacle avoidance sonar (OAS) because the size of the FLS is not suitable for the micro AUV. In brief, the local path control system based on the OAS for the micro AUV operates with the following problems: the OAS offers low bearing resolution and local range information, it requires the system that has reduced power consumption to extend the mission execution time, and it requires an easy design procedure in terms of its structures and parameters. To solve these problems, an intelligent local path control algorithm based on the beam modeling of OAS with the evolution strategy (ES) and the fuzzy logic controller (FLC), is proposed. To verify the performance and analyze the characteristic of the proposed algorithm, the course control of the underwater flight vehicle (UFV) is performed in the horizontal plane. Simulation results show that the feasibility of real application and the necessity of additional work in the proposed algorithm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.49-55
• /
• 2006

Nowadays, flood hazard maps have been generated to minimize the damages from the flooding. To generate such flood hazard maps, LiDAR data can be used as data source with higher data accuracy. LiDAR data, however, requires relatively higher cost and longer processing time. In this background, this study proposed DEM generation using NGIS digital topographic maps. For that, breaklines were processed to count directions of water flows. In addition, the river profile data, unique data source to represent real topography of the river area, were integrated to the breaklines to generate DEM. City of Kuri in Kyunggi Province was selected for this study and 1:1,000 and 1:5,000 topographic maps were integrated to process breaklines and river profile data were also linked to generate DEM. The generated DEM showed relatively lower vertical accuracy from mixing 1:1,000 and 1:5,000 topographic maps since 1:1,000 topographic maps were not available for some portion of the area. However, the DEM generated demonstrated reasonable accuracy and resolution for flood map generation as well as higher cost saving effects. On the contrary, for more efficient utilization of NGIS topographic maps, periodic map updating needs to be made including technical consideration in building breaklines and applying interpolation methods.