• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.13-13
• /
• 2002

A Spatial light modulator (SLM) is a real-time programmable device having the modulation function of the amplitude, phase or polarization of an optical wavefront as a function of position via electrical or optical control signals. Various types of reusable SLMs with two-dimensional pixel arrays are centrally important devices in volumetric recording, data processing, pattern recognition, optical computer and other optical system. (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.68-74
• /
• 1998

The ESPI(Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique that allows static and dynamic deformation analysis and surface shape measurements of engineering structures. e .g. turbine blades. vehicle engine components, body panels, etc. This technique is very similar to holographic interferometry, but uses a solid static camera and an image processing board for recording and digital processing of speckle patterns. In this paper it is presented that FEM results for the free vibration of symmetrically laminated composite as [30/-30/90]s. The natural frequencies of laminated composite rectangular plates having the particular boundary condition are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculation by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.1
• /
• pp.31-35
• /
• 2011

In microholographic data storage system (MDSS), compact recording is required to achieve high capacity.[1] When the data is recorded, neighbor monomer is also affected by reaction at the focal point.[2,3] This unintended process caused more monomer consumption and degradation of total capacity. To avoid this extra consumption of dynamic range, it is required to define the effective dynamic range for MDSS. In this paper, we experimentally investigate the relation between dynamic range consumption and micro grating formation. Dynamic range consumption was monitored by real time read-out system. Micrograting was recorded with different consumption ratio and compared by diffraction efficiency of track direction. Finally, we define suitable dynamic range for MDSS.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.43-48
• /
• 2023

This paper discusses the design of 32Mbyte asynchronous nonvolatile memory modules, which includes self-diagnosis and RTC (Real Time Clock) functions to enhance their data stability and reliability. Nonvolatile memory modules can maintain data even in a power-off state, thereby improving the stability and reliability of a system or device. However, due to the possibility of data error due to electrical or physical reasons, additional data loss prevention methods are required. To minimize data error in asynchronous nonvolatile memory modules, this paper proposes the use of voltage monitoring circuits, self-diagnosis, BBT (Bad Block Table), ECC (Error Correction Code), CRC (Cyclic Redundancy Check)32, and data check sum, data recording method using RTC. Prototypes have been produced to confirm correct operation and suggest the possibility of commercialization.

• Journal of information and communication convergence engineering
• /
• v.21 no.3
• /
• pp.216-224
• /
• 2023

Smart lighting systems have become increasingly popular in several public sectors because of trends toward urbanization and intelligent technologies. In this study, we designed and implemented a web application platform to explore and monitor data acquired from lighting devices at Thammasat University (Rangsit Campus, Thailand). The platform provides a convenient interface for administrative and operative staff to monitor, control, and collect data from sensors installed on campus in real time for creating geographically specific big data. Platform development focuses on both back- and front-end applications to allow a seamless process for recording and displaying data from interconnected devices. Responsible persons can interact with devices and acquire data effortlessly, minimizing workforce and human error. The collected data were analyzed using an exploratory data analysis process. Missing data behavior caused by system outages was also investigated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.301-304
• /
• 2006

As is different from formerly used fixing camera method in this paper, proposed method that can measure the speed of vehicles and logarithm of vehicles in video. Vehicles that proposed method runs with 50km/h, 80km/h, 90km/h's the speed recording on Video Tape beginning point and time of reaching point draw, and calculated 47.57km/h, 81.20km/h, the 90.00km/h speed by time and distance, the tracking cars and the velocity detection in video with the 'begin-line mark' and the 'end-line mark' processing.

• Journal of the Korean Society of Costume
• /
• v.16
• /
• pp.111-123
• /
• 1991

We suppose that Poback-cheok appeared with wearing clothes in the ancient times. At first, man used body as a scale, and it is gradually diversified with social development. It is clear that also in the time of Shilla-Dynasty, the United Shilla-Dynasty and the Goryeo-Dynasty, the system of degree existed in historical relation to that of China. But we don't know it's real length, because there is no recording until the beginning of the Yi-Dynasty. The first recording about Poback-cheok appeared in the time of the King Sejong. Hwangjong-Cheok which is a original vessel of the degree system appears in the 7th years of the King Sejong. In the 12th years of the King Sejong, Ju-cheok, Youngjo-cheok and Joyegi-cheok appeared. In the 13th years of the King Sejong, Poback-cheok appeared as a new changed one. At that time, the length of Poback-cheok is recorded as 44.75cm in chapter of Oye and Jonsoo Pobaek-cheok is recorded as 46.73cm in Jeonjesangjeongso's picture, and it is recorded as 46.80cm in the Kyunggugdaijeon. The scale system is put in good order in the time of King Sejong. But it is confused by the war of 1636 after King Seonjo period. In the 26 th year of King Youngjo, it is reappeared as one of the King Sejong, and it is fixed as 46.80cm. The length is used until the proclamation in the 6th years of the Kwangmu(1902), and then the length of Pobaek-cheok is changed as 48.48 cm, that is measured by a Gok-cheok. After that time, the scale system is very confused during the introduction of new civilization and the Korean-Japanes Unit. So it is used longer or shorter(that is, 49.24cm or 48.91cm). And the metric system is introduced by Japanes in 1926, and it reached the present time. According to use, the actual thing with is used in the end of the Yi-Dynasty is various from 30cm to 70cm. And according to material and craft-man, it can be devided into Hwa-gag scale, Najeon-blacklacquer-scale, bamboo-scale, wooden-scale. The way of expression of measure is always followed by the decimal system. The other half part, except the part of expression of graduation, is put on decorate with a pattern. Also we can see the idea of living on this point.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.141-149
• /
• 2022

With the development of artificial intelligence and unmanned technologies, the remote surveillance/autonomous driving systems have been actively researched. For an effective performance analysis of the developed remote control system, it is important to record the data of it in real time. In addition, in order to analyze the performance between the control system and the remote system, the recorded data from them should be synchronized with time. In this paper we proposed a novel time synchronization method for the remote control system. The proposed remote control system satisfies the time difference of the recorded data within 1 ms, and we can reduce the time difference by using a CPU shielding and affinity setting. The performance of the proposed method was proved through various network data storage experiments. And the experiments confirmed that the proposed method can be applied to recording devices of unmanned ground vehicles and control vehicles. The proposed method will be used as a method for analyzing network data of UGV-R (Unmanned Ground Vehicle - Reconnaissance).

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.29-36
• /
• 2008

This paper proposes algorithm for the system that can search for an image of a frame unit, and we implement it. A system already inserts in images after generating the cord that mechanical decoding and identification are possible. We are independent of an external noise in a frame unit, and a system to propose at these papers can search for an image recorded by search condition to include recording date, recording time, a recording place or filming course etc. This system is composed by image insertion wealth to insert data to an image to data image code generation wealth, a frame generating data image code you apply a code generation rule to be fixed in order to express to a price to have continued like data entry wealth, GPS locator values and direction price receiving an image signal, image decoding signals and an image search signal to include search condition, and to have continuity from users each of an image. Also, image decoding we decipher about the noise that was already added from the outsides in a telerecording process, a copy process or storage processes inserted in images by real time, and searching image information by search condition. Consequently we implement decoder, and provide the early system that you use, and we easily insert data code among images. and we can search. and maximization can get precision regarding an image search and use satisfaction as we use algorithm to propose at these papers.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.