• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.241-245
• /
• 2013

In the case of the existing train control system, the driver monitors the condition of the vehicle through a composite controller device that displays various information on a screen in the vehicle. However, when problems arise such as car trouble, it is difficult for the drivers to take action immediately. In addition, maintenance personnel have to manually save data one by one after storing the vehicle to analyze control information of the main devices such as the brake controller and auxiliary power. To improve these points, a system that sends and receives all information in real time should be established by installing a sensor communication network and a surveillance system. This study attempts to improve the safety and maintenance of rail vehicles by suggesting a standardized method for train control and surveillance system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.880-885
• /
• 2007

In the last decades, the resource used in the construction process has become much more various in kinds and increased in number as construction has become enlargement and complexity. Resource management on a construction site has been recognized as a detrimental factor to influence project success, therefore various technologies have been applied by the construction industry to streamline resource management. RFID/USN interworking system composed of RFID technology and sensor network supports automation of resource management and real-time information networking. Most of research efforts for RFID technology in the construction industry have been limited to object identification technology. The study proposed herein it to verify the applicability of RFID/USN interworking system to the construction industry. The identification rates of RFID/USN interworking system by distance and degree and by type of materials was identified and analyzed.

• IMMUNE NETWORK
• /
• v.9 no.3
• /
• pp.106-113
• /
• 2009

Background: We previously demonstrated remarkable differences in the expression of IL-8/CXCL8 in aortic tissues and vascular smooth muscle cells (VSMC) from spontaneously hypertensive rats (SHR) compared to VSMC from normotensive Wistar-Kyoto rats (WKY). In the present study, we investigated the direct effect of IL-8/CXCL8 on expression of 12-lipoxygenase (LO), a hypertensive modulator, in SHR VSMC. Methods: Cultured aortic VSMC from SHR and WKY were used. Expression of 12-LO mRNA was determined by real-time polymerase chain reaction. Phosphorlyation of ERK1/2 and production of 12-LO and angiotensin II subtype 1 ($AT_1$) receptor were assessed by Western blots. IL-8/CXCL8-stimulated DNA synthesis was determined by measuring incorporation of [$^3H$]-thymidine. And effect of IL-8/CXCL8 on vascular tone was determined by phenylephrine-induced contraction of thoracic aortic rings. Results: Treatment with IL-8/CXCL8 greatly increased 12-LO mRNA expression and protein production compared to treatment with angiotensin II. IL-8/CXCL8 also increased the expression of the $AT_1$ receptor. The increase in 12-LO induced by IL-8/CXCL8 was inhibited by treatment with an $AT_1$ receptor antagonist. The induction of 12-LO mRNA production and the proliferation of SHR VSMC by IL-8/CXCL8 was mediated by the ERK pathway. The proliferation of SHR VSMC and the vascular contraction in the thoracic aortic ring, both of which were induced by IL-8/CXCL8, were inhibited by baicalein, a 12-LO inhibitor. Conclusion: These results suggest that the potential role of IL-8/CXCL8 in hypertensive processes is likely mediated through the 12-LO pathway.

• Journal of the Korean Institute of Gas
• /
• v.8 no.1 s.22
• /
• pp.30-36
• /
• 2004

Although the usage of gas as one of the most economical energy source is ever expanding, numerous gas accidents occur as a result of negligence in safety management. The main reason behind such accident is that the current safety control system relies heavily on the manual control mechanism. This paper designed and developed a prototype of a computerized gas safety control system that automates such critical functions as the alarm sensing and the valve control. Since the system is connected through a digital network, the control can be performed remotely. Most importantly, the accidental risk or damage can be greatly reduced since the system monitors and reacts actively to gas leakage in real time.

• Journal of Information Technology and Architecture
• /
• v.9 no.4
• /
• pp.391-400
• /
• 2012

This work describes a derivation of functional architecture of Cooperative Engagement (CE) for a Theater Ballistic Missile Defense (TBMD). The TBMD is composed of multi-layered defense systems as system of systems which includes network-based sensors, shooters and battle management. The Cooperative Engagement Capability (CEC) is a typical real-time battle management system, and the key function of the CEC is CE. The CE is a warfighting concept designed to defeat threats through the synergistic integration of distributed resources among two or more units. In this point of view, this paper proposed functional architecture through analyzing the CE concept, and was conducted as a pre-study to develop a CE based combat system of TBMD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.298-305
• /
• 2003

In this paper, we proposed a high performance lookup controller for IP packet forwarding engine of ATM based label edge routers. The lookup controller is designed to provide services such as MPLS, VPN, ELL, and RT services as well as the best effort. For high speed searching for IP addresses, we employed a TCAM based hardware search device not using traditional algorithmic approaches. We also implement lookup control functions into FPGA for fast processing of packet header and lookup control. The proposed lookup controller is designed to support differenciated services for users and to process in pipelined mechanism for performance improvement. A two-step search scheme is also applied to perform lookup for the key combined with multi-field of packet header. We found that the proposed lookup controller provides the performance of about 16M packets per second through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.774-782
• /
• 2003

Generally, in the Mobile IP technologies, the use of RSVP(Resource ReSerVation Protocol) is recommended in order to provide a mobile node real-time service. However, the handoff of a mobile node increases the registration delay, RSVP reservation delay and signalling overhead in the Mobile IP and RSVP interworking. Specially, the resource reservation on the path between a mobile node and a correspondent node is the duplicated reservation and then causes unnecessary creation of the signalling overhead and waste of the resource, since the majority of the path before handoff and after handoff is same. If the radius of a cell providing a wireless interface to a mobile node is small, the number of handoff will increase and also signalling overhead and duplicated resource reservation will increase. In this paper, we proposed the integration model of Cellular IP and RSVP with RSVP proxy scheme. Here, Cellular IP protocol minimizes registration delay, transfer delay, and loss by handoff in micro cell network, the RS VP proxy that minimizes the duplication of resource reservation prevents the path for RSVP session from change using the address for reservation of a mobile node. Proposed scheme was evaluated in comparison with the existing Mobile IP and RSVP interworking scheme using the probability of resource reservation fail to the radius of a cell and the handoff rate.

• The KIPS Transactions:PartB
• /
• v.16B no.1
• /
• pp.25-34
• /
• 2009

DVR(Digital Video Recorder) system stores video inputs in compressed digital formats and retrieve them. DVR system has several advantages over traditional analog tape recorder system which are (1) improved real-time monitoring, recording and searching capability, and (2) other capabilities such as watermarking and remote monitoring through network. AVI format is the most popular format used for DVR systems. However, AVI format has drawbacks in recording and searching due to structural problem. Some vendors develop and use their own format, do not open the format to the public. In this paper, ESP format is proposed. ESP format solves the drawbacks of AVI format, and the advantages of AVI format apply to ESP format. Moreover, ESP format provides multistream recording/replay and event-recording. In result, ESP format enchances functionality of recording and searching in DVR system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.9
• /
• pp.227-234
• /
• 2018

Guaranteeing the end-to-end delay deadline is an important issue for quality of service (QoS) of delay sensitive systems, such as real-time system, networked control system (NCS), and cyber-physical system (CPS). Most routing algorithms typically use the mean end-to-end delay as a performance metric and select a routing path that minimizes it to improve average performance. However, minimum mean delay is an insufficient routing metric to reflect the characteristics of the unpredictable wireless channel condition because it only represents average value. In this paper, we proposes a deadline-aware routing algorithm that maximizes the probability of packet arrival within a pre-specified deadline for CPS by considering the delay distribution rather than the mean delay. The proposed routing algorithm constructs the end-to-end delay distribution in a given network topology under the assumption of the single hop delay follows an exponential distribution. The simulation results show that the proposed routing algorithm can enhance QoS and improve networked control performance in CPS by providing a routing path which maximizes the probability of meeting the deadline.