• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.245-255
• /
• 2015

This study used high density network of integrated meteorological sensor, which are operated by SK Planet, with KMA weather stations to estimate the quantitative precipitation field in Seoul area. We introduced SK Planet network and analyzed quality of the observed data for 3 months data from 1 July to 30 September 2013. As the quality analysis result, we checked most SK Planet stations observed similar with previous KMA stations. We developed the real-time quality check and adjustment method to reduce the error effect for hydrological application by missing and outlier value and we confirmed the developed method can be corrected the missing and outlier value. Through this method, we used the 190 stations(KMA 34 stations, SK Planet 156 stations) that missing ratio is less than 20% and the effect of the outlier was the smallest for quantitative precipitation estimation. Moreover, we evaluated reproducibility of rainfall field high density rain gauge network has $3km^2$/gauge. As the result, the spatial relative frequency of rainfall field using SK Planet and KMA stations is similar with radar rainfall field. And, it supplement the blank of KMA observation network. Especially, through this research we will take advantage of the density of the network to estimate rainfall field which can be considered as a very good approximation of the true value.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3262-3271
• /
• 2000

Continuous media objects, due to large volume and real-time consiraints in their delivery,are likely to consume much network andwidth Generally, proxy servers are used to hold the fiequently requested objects so as to reduce the network traffic to the central server but most of them are designed for text and image dae that they do not go well with continuous media data. So, in this paper, we propose a two-layered network cache management policy for continuous media object delivery on the wide area networks. With the proposed cache management scheme,in cach LAN, there exists one LAN cache and each LAN is further devided into a group of sub-LANs, each of which also has its own sub-LAN eache. Further, each object is also partitioned into two parts the front-end and rear-end partition. they can be loaded in the same cache or separately in different network caches according to their access frequencics. By doing so, cache replacement overhead could be educed as compared to the case of the full size daa allocation and replacement , this eventually reduces the backbone network traffic to the origin server.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.15-15
• /
• 2011

The radar observation system in Japan is operated by two governmental groups: Japan Meteorological Agency (JMA) and the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) of Japan. The JMA radar observation network is comprised of 20 C-band radars (with a wavelength of 5.6 cm), which cover most of the Japan Islands and observe rainfall intensity and distribution. And the MLIT's radar observation system is composed of 26 C-band radars throughout Japan. The observed radar echo from each radar unit is first modified, and then sent to the National Bureau of Synthesis Process within the MLIT. Through several steps for homogenizing observation accuracy, including distance and elevation correction, synthesized rainfall intensity maps for the entire nation of Japan are generated every 5 minutes. The MLIT has recently launched a new radar observation network system designed for flash flood observation and forecasting in small river basins within urban areas. It is called the X-band multi parameter radar network, and is distinguished by its dual polarimetric wave pulses of short length (3cm). Attenuation problems resulting from the short wave length of radar echo are strengthened by polarimetric wavelengths and very dense radar networks. Currently, the network is established within four areas. Each area is observed using 3-4 X-band radars with very fine resolution in spatial (250 m) and temporal (1 minute intervals). This study provides a series of utilization procedures for the new input data into a real-time forecasting system. First of all, the accuracy of the X-band radar observation was determined by comparing its results with the rainfall intensities as observed by ground gauge stations. It was also compared with conventional C-band radar observation. The rainfall information from the new radar network was then provided to a distributed hydrologic model to simulate river discharges. The simulated river discharges were evaluated again using the observed river discharge to estimate the applicability of the new observation network in the context of operations regarding flood forecasting. It was able to determine that the newly equipped X-band polarimetric radar network shows somewhat improved observation accuracy compared to conventional C-band radar observation. However, it has a tendency to underestimate the rainfall, and the accuracy is not always superior to that of the C-band radar. The accuracy evaluation of the X-band radar observation in this study was conducted using only limited rainfall events, and more cases should be examined for developing a broader understanding of the general behavior of the X-band radar and for improving observation accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1575-1583
• /
• 2008

Wireless sensor network has merit of low-power, low-cost and self-organization network, so there are many researches substituted for existing wire network. As structure reinforcement work need a high accuracy, many sensors are installed in structure and connected with data logger for monitoring. However this wire data logger method takes a long time to install wires and installed wires obstruct to work. Additionally, wire data logger method represent sensor data by only numeric and graph, it is not able to support a rapid decision-making for working. To resolve wiring problem and support decision-making, we designed and implemented the monitoring system based in wireless sensor network. For verifying performance, accuracy and availability, we simulated and tested our system in real field. Consequently, wireless sensor network method is easier to install and deploy than wire data logger method, user is able to monitor instinctively and overall by 3D representation of structure and sensors, and it show not only accuracy but also performance for many sensors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.18-29
• /
• 2022

Recently, cooperative intelligent transport systems (C-ITS) testbeds have been deployed in great numbers, and advanced autonomous driving research using V2X communication technology has been conducted actively worldwide. In particular, the broadcasting services in their beginning days, giving warning messages, basic safety messages, traffic information, etc., gradually developed into advanced network services, such as platooning, remote driving, and sensor sharing, that need to perform real-time. In addition, technologies improving these advanced network services' throughput and latency are being developed on many fronts to support these services. Notably, this research analyzed the network latency requirements of the advanced network services to develop a remote driving service for the droid type low-speed robot based on the 3GPP C-V2X communication technology. Subsequently, this remote driving service's performance was evaluated using system modeling (that included the operator behavior) and simulation. This evaluation showed that a respective core and access network latency of less than 30 ms was required to meet more than 90 % of the remote driving service's performance requirements under the given test conditions.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.458-464
• /
• 2024

This study proposes a fault-tolerant caching system to address the issue of caching content imbalance caused by the dynamic departure and participation of cache servers in a heterogeneous cache server network, and validates it in both real and virtual environments. With the increase of large-scale media content requiring various types and resolutions, the necessity of cache servers as key components to reduce response time to user requests and alleviate network load has been growing. In particular, research on heterogeneous cache server networks utilizing edge computing and low-power devices has been actively conducted recently. However, in such environments, the irregular departure and participation of cache servers can occur frequently, leading to content imbalance among the cache servers deployed in the network, which can degrade the performance of the cache server network. The fault-tolerant caching algorithm proposed in this study ensures stable service quality by maintaining balance among media contents even when cache servers depart. Experimental results confirmed that the proposed algorithm effectively maintains content distribution despite the departure of cache servers. Additionally, we built a network composed of seven heterogeneous cache servers to verify the practicality of the proposed caching system and demonstrated its performance and scalability through a large-scale cache server network in a virtual environment.

• Spatial Information Research
• /
• v.22 no.4
• /
• pp.67-76
• /
• 2014

Recently, through the development of IT and mobile technology, spatial information plays a role of infrastructure of the people life and the national economy. Many kinds of applications including SNS and social commerce is to leverage the spatial information for their services. In the case of domestic, spatial open platform that can provide national spatial data infrastructure services in a stable manner has been released. And many people have been interested to the open platform services. However, the open platform currently has many difficulties to analyze its service status and load in real time, because it does not hold a real-time monitoring system. Therefore, we propose a method that can analyze the real-time service status of the open platform using the analysis of the web server log information. In particular, we propose the results of the analysis as follows: amount of data transferred, network bandwidth, number of visitors, hit count, contents usage, and connection path. We think the results presented in this study is insufficient to understand the perfect service status of the open platform. However, it is expected to be utilized as the basic data for understanding of the service status and for system expansion of the open platform, every year.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.55-64
• /
• 2006

In this paper, a new web-based remote 3D imaging communication system employing an adaptive matching algorithm is suggested. In the proposed method, feature values are extracted from the stereo image pair through estimation of the disparity and similarities between each pixel of the stereo image. And then, the matching window size for disparity estimation is adaptively selected depending on the magnitude of this feature value. Finally, the detected disparity map and the left image is transmitted into the client region through the network channel. And then, in the client region, right image is reconstructed and intermediate views be synthesized by a linear combination of the left and right images using interpolation in real-time. From some experiments on web based-transmission in real-time and synthesis of the intermediate views by using two kinds of stereo images of 'Joo' & 'Hoon' captured by real camera, it is analyzed that PSNRs of the intermediate views reconstructed by using the proposed transmission scheme are highly measured by 30dB for 'Joo', 27dB for 'Hoon' and the delay time required to obtain the intermediate image of 4 view is also kept to be very fast value of 67.2ms on average, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1150-1158
• /
• 2010

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problem. First, in preprocessing part, we use a CCD camera to obtain a picture frame in real-time. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. We use an AdaBoost algorithm proposed by Viola and Jones, which is exploited for the detection of facial image area between face and non-facial image area. As the feature extraction algorithm, PCA method is used. In this study, the PCA method, which is a feature extraction algorithm, is used to carry out the dimension reduction of facial image area formed by high-dimensional information. Secondly, we use pRBFNNs to identify the ID by recognizing unique pattern of each person. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. Coefficients of connection weight identified with back-propagation using gradient descent method. The output of pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of the Particle Swarm Optimization. The proposed pRBFNNs are applied to real-time face recognition system and then demonstrated from the viewpoint of output performance and recognition rate.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.113-122
• /
• 2007

The rapid growth of aerial survey and remote sensing technology has enabled the rapid acquisition of very large amounts of geographic data, which should be analyzed using real-time visualization technology. The level of detail(LOD) algorithm is one of the most important elements for realizing real-time visualization. We chose the triangulated irregular network (TIN) method to generate normalized digital elevation model(DEM) data. First, we generated TIN data using contour lines obtained from a two-dimensional(2D) digital map and created a 2D grid array fitting the size of the area. Then, we generated normalized DEM data by calculating the intersection points between the TIN data and the points on the 2D grid array. We used constrained Delaunay triangulation(CDT) and ray-triangle intersection algorithms to calculate the intersection points between the TIN data and the points on the 2D grid array in each step. In addition, we simulated a three-dimensional(3D) terrain model based on normalized DEM data with real-time visualization using a Microsoft Visual C++ 6.0 program in the DirectX API library and a quad-tree LOD algorithm.