• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.691-694
• /
• 2003

This paper describes how to use Profibus networks to support real-time industrial communications, that is, how to ensure the transmission of real-time messages within a maximum bound time. Profibus is based on a simplified timed token protocol, which is a well-proved solution for the real-time communication systems. However, Profibus differs from the timed token protocol, thus the usual timed token protocol has to be modified in order to be applied in Profibus. In fact, the real-time solutions for networks based on the timed token protocol rely on the possibility of allocating specific bandwidth for the real-time traffic. This means that a minimum amount of time to transmit the real-time messages is always guaranteed whenever each token is arrived. In other words, with the Profibus protocol, at least, one real-time message should be transmitted per every token visit in the worst case. It is required to control medium access properly to satisfy the message deadlines. In this paper, we have presented how to obtain the optimal network parameter for the Profibus protocol. The selected network parameter is valid regardless of the behavior of asynchronous messages.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2016

In this paper, the existing domestic HVAC systems, devices TCP / IP does not support the most, thereby, not performed remote management, it is necessary to regularly field service, inefficiency and cost bring a burden. This is through a comparison of the IoT-based primary, real-time protocol of what has become a hot topic recently, to be able to control and real-time monitoring through the CCU device in the HVAC system. Compare for this Internet of Things device for real-time monitoring and control of the XMPP, CoAP, MQTT main real-time protocol is used on. Finally, flexibility, light weight, based on MQTT a two-way messaging protocols with reliable message delivery, implements the protocol on the real-time HVAC system in the cloud platform.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.218-225
• /
• 2001

This paper analyses the performance of network system using the CAN(Controller Area Network) protocol. Given messages are assumed to be scheduled by the DMS(Deadline Monotonic Scheduling) algorithm. The mathematical models for time-delay that can be occurred between CAN nodes are defined. The effectiveness of modeling is shown by comparing the difference of time-delay between simulations and practical experiments. We analyse the results according to the variation of factors, such as the number of nodes, the transmission speed, the message size and the number of aperiodic messages through simulation and confirm the real-time performance of lower priority messages. We also investigate the real-time performance of periodic messages when aperiodic message generates.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.291-296
• /
• 2008

Wireless network technologies are becoming more widely used in industrial environment. The industrial communication system requires a real-time delivery of messages. The sensors periodically senses the physical environment and wants to deliver the data in real-time to the sink. This paper proposes a real-time protocol for periodic messages on wireless sensor and actor networks to be used in industrial communications. The proposed protocol delivers the data message using the shortest path from the source and the nearest actor. The protocol considers the energy consumption by reducing the number of broadcast messages during flooding. We have evaluated the performance of the proposed protocol using QualNet simulator. The simulation results show that the data messages have been delivered in real-time and the number of broadcast messages is reduced from 90% to 35% compared the existing protocols.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.668-678
• /
• 2023

FlexRay is an in-vehicle network with maximum two channels and maximum transmission speed of 10Mbps per channel. FlexRay exploits TDMA (Time Division Multiple Access) and FTDMA (Flexible Time division Multiple Access) to ensure real-time communication with efficient transmission, so it is used for real-time electronic control of safety-critical vehicular modules such as powertrain. This paper explains FlexRay protocol, time hierarchy, message frame, communication controller, and conformance test in detail based on ISO 17458 standard and FlexRay consortium documents.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1209-1215
• /
• 2009

This paper discusses a common message protocol for green power systems such as tidal, wind, photovoltaic, and solar systems. For this investigations and analysis, existing protocols such as ELCOM-90, TASE.1, ICCP/TASE.2 and SCADA were analyzed for the application of green power systems in view of real-time property and reliability. For the analysis, the practical example of green power system using SACADA and ICCP are investigated and discussed. As a future direction of this investigations, the feasibility analysis of manufacturing message specification(ISO-9560) for green power system is discussed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.39-44
• /
• 2018

Communication in real-time distributed system should have high reliability. To develop group communication Protocol with high reliability, potential fault should be known and when fault occurs, it should be detected and a necessary action should be taken. Existing detection method by Ack and Time-out is not proper for real time system due to load to Ack which is not received. Therefore, group communication messages from real-time distributed processing systems should be communicated to all receiving processors or ignored by the message itself. This paper can make be sure of transmission of reliable message and deadline by suggesting and experimenting fault detection technique applicable in the real time distributed system based on ring, and analyzing its results. The experiment showed that the shorter the cycle of the heartbeat signal, the shorter the time to propagate the fault detection, which is the time for other nodes to detect the failure of the node.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.150-161
• /
• 1999

This paper deals with the design and development of a real-time integrated communication architecture for heterarchical SFCS(Shop Floor Control System). In autonomous agent-based heterarchical SFCS, each functional unit of parts and resources is equipped with an intelligent controller (agent) that acts as the representative of the entity. The controllers communicate and negotiate with other controllers on a real-time basis through message passing and bidding protocol to achieve mutual agreements for task sharing. ICPL(Integrated Communication Protocol and Language) is proposed for this purpose. ICPL is a language and a protocol for supporting communication among intelligent controllers. Based on the speech act theory, this paper proposes a semantic description for ICPL that associates the description of the cognitive states of controllers with the use of language primitives (message_type). Semantics for the basic set of ICPL messages is described. Eventually, an ICPL-based communication architecture can provide the implementation of the distributed and heterarchical SFCS, and makes the intelligent controller transparent to the negotiation problem.