• 정보처리학회논문지A
• /
• 제9A권2호
• /
• pp.181-190
• /
• 2002

IEEE1394는 디지털 캠코더, 디지털 TV, 퍼스널 컴퓨터를 포함한 가정내의 디지털 네트웍을 구성하기 위한 대표적인 인터페이스이다. 최근 IEEE1394는 기존의 멀티미디어 데이터를 지원하는 장비의 인터페이스에서 벗어나 실시간성이 요구되는 제어 시스템에 적용이 되고 있으며 더불어 IICP(Instrument and Industrial Control Protocol)의 제정등 응용분야가 점차 확대되고 있다. 또한 홈 네트웍에서 제어 네트웍과 데이터 네트웍의 연동을 위해 기반 망으로 사용됨으로써 제어 네트웍에서 요구되는 실시간성의 보장이 IEEE1394에서도 요구되고 있다. 이 논문에서는 홈 네트윅에서 IEEE1374의 실시간성 보장을 위해 이벤트 채널 모델을 사용한 서비스의 우선순위에 따른 처리기법과 1394 디바이스 드라이버 레벨에서의 우선순위 보장을 위한 구조를 제안한다. 서비스의 우선순위에 따른 실시간성 보장기법은 서비스 이벤트의 우선순위에 따라 이벤트 채널을 통해 높은 우선순위 서비스의 예측가능성을 보장하며, 디바이스 드라이버 레벨에서는 우선순위 큐를 이용한 패킷의 전송과 등시성 전송을 위한 효율적인 버퍼관리 기법을 제공한다. 이러한 구조는 향후 IEEE1374기반의 홈 네트웍 미들웨어 뿐만이 아니라 실시간 응용이 요구되는 다양한 어플리케이션과 서비스 등에 사용될 수 있을 것으로 보인다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1682-1691
• /
• 2015

In this paper, a real time implementation of selective harmonic elimination pulse width modulation (SHEPWM) using Real Coded Genetic Algorithm (RGA), Particle Swarm Optimization technique (PSO) and a new technique known as Linearization Method (LM) for Single Phase Matrix Converter (SPMC) is designed and discussed. In the proposed technique, the switching frequency is fixed and the optimum switching angles are obtained using simple mathematical calculations. A MATLAB simulation was carried out, and FFT analysis of the simulated output voltage waveform confirms the effectiveness of the proposed method. An experimental setup was also developed, and the switching angles and firing pulses are generated using Field Programmable Gate Array (FPGA) processor. The proposed method proves that it is much applicable in the industrial applications by virtue of its suitability in real time applications.

• 한국시뮬레이션학회논문지
• /
• 제3권1호
• /
• pp.125-134
• /
• 1994

In real-time database systems, transactions's commitment done before the given deadlines is more important than just getting the maximum throughput. Transactions missing the given deadlines are no longer meaningful in real-time applications. Therefore, there is a need for new transaction processing models to meet the given deadlines in real-time database applications, because moat conventional transaction models are not designed to meet deadlines. In this paper we propose a new transaction models which uses multiple versions of a data item. The model uses read-from graphs and dynamic reorder of transactions to meet deadlines. A read-from graph contains the past read semantics of read operations and support the model to decide which database operation to be taken. Then, we show simulation results comparing the proposed model with other transaction models such as two phase locking model and the optimistic concurrency control model.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.129-134
• /
• 2012

As application-specific requirements for wireless sensor networks emerge, both real-time and reliable communications become major research challenges in wireless sensor networks due to the many constraints on nodes and wireless links. To support these services, several protocols have been proposed. However, since most of them were designed as well as developed for general purpose applications, it is not recommended that they be directly adapted to applications with special requirements. In this paper, we propose a way to extend the current reliable transport protocol to cover a special real-time service, the (m,k)-firm deadline stream, in wireless sensor networks. While the proposed scheme is basically built on the PSFQ protocol for reliability, some features have been newly developed to support the (m,k)-firm stream efficiently. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic and with failed links.

• 대한임베디드공학회논문지
• /
• 제9권3호
• /
• pp.173-182
• /
• 2014

The CRT monitor display system for SONAR signal that are commonly used in ships or naval vessels uses vector scanning method. Therefore the processing circuits of the system are complex. Also the purchase of parts is difficult as well as high-cost because the production had been shut down. FPGA-based embedded system is flexible to various digital applications because it can be able to simplify processing circuits and to make a easy customized design for end user, and it provides low-cost high-speed performance. In this paper, we describe an implementation of FPGA embedded system for real-time SONAR signal display using the triple buffering method to overcome some weakness of existing CRT system. Our system provides real-time acquisition and display capability of SONAR signal, and removes afterimage effect that is a critical problem of the system proposed in the preceding study.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2075-2083
• /
• 2016

The real time IAQ (Indoor Air Quality) management is very important for large buildings and underground facilities such as subways because poor IAQ is immediately harmful to human health. Such IAQ management requires monitoring, prediction and control in an integrated and real time manner. In this paper, we present three PM10 hourly prediction models for such realtime IAQ management as both Multiple Linear Regression (MLR) and Artificial Neural Network (ANN) models. Both MLR and ANN models show good performances between 0.76 and 0.88 with respect to R (correlation coefficient) between the measured and predicted values, but the MLR models outperform the corresponding ANN models with respect to RMSE (root mean square error).

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.89-99
• /
• 1997

The application for real-time database systems must satisfy timing constraints. Typically the timing constraints are expressed in the form of deadlines which are represented by priorities to e used by schedulers. In any real-time applications, since the system maintains sensitive information to be shared by multiple users with different levels of security clearance, security is another important requirement. As more advanced database systems are being used in applications that need to support timeliness while managing sensitive information, protocols that satisfy both requirements need to be developed. In this appear, we proposed a new priority-driven secure multiversion locking (PSMVL) protocol for real-time secure database systems. The schedules produced by PSMVL are proven to e one-copy serializable. We have also shown tat the protocol eliminates covert channels and priority inversions. The details of the protocol, including the compatibility matrix and the version selection algorithms are presented. the results of the performance comparisons of our protocol with other protocols are described.

• 전자공학회논문지CI
• /
• 제48권3호
• /
• pp.82-90
• /
• 2011

마이크로프로세서의 발전과 함께 멀티코어 시스템은 점차 보편화 되어가고 있다. 이러한 하드웨어 성능향상 패러다임의 변화로 인해 소프트웨어의 성능향상을 위해서는 기존의 싱글 스레드 어플리케이션들을 멀티 스레드 어플리케이션들로 교체하는 과정이 필수적이다. 멀티 스레드 어플리케이션 개발의 복잡성 때문에, 성능모니터링 도구는 어플리케이션의 성능 최적화를 지원하기에 유용한 도구로 사용된다. 기존의 성능모니터링 도구는 사용의 편의성이나 실시간성의 지원보다는 성능 측정 자체에 초점이 맞춰져 있다. 실시간 성능 모니터는 멀티 스레드 어플리케이션이 수행하는 동안 나타나는 문제점을 파악하는 것 뿐 아니라 실시간으로 어플리케이션의 동작 상태를 개발자가 확인 할 수 있기 때문에 단순한 성능 지표들만으로 문제점의 원인을 찾아내야하는 비 실시간 성능 모니터에 비해 효과적인 도구로 사용될 수 있다. 본 논문에서는 멀티코어 시스템을 위한 실시간 성능모니터링 도구인 RMPM(Real-time Multi-core Performance Monitor)를 제안하고 성능 측정 주기로 인한 오버헤드와 정확성 사이의 관계를 비교하여 최적의 측정 주기를 결정하였다. 제안한 성능모니터는 전체시스템의 CPU 사용량, 메모리 사용량, 네트워크 사용량 뿐아니라 시스템의 코어별, 어플리케이션의 스레드별 부하 분산상태를 나타낼 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.91-94
• /
• 1998

ATM technology is reaching a certain level of maturity that allow for its deployment in local as well as in wide area networks. Concurrently, audiovisual applications are foreseen as one of the major users of such broadband networks. We present in this paper requriement of real-time multimedia service on B-ISDN networks and simulating the transport of MPEG-2 encoded multimedia data over ATM networks using CBR, VBR, ABR of ATM Traffic Service. We compare each delay time considering network performance and propose need for real-time multimedia service.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.67-72
• /
• 2002

Real-time techniques are motivated by a number of factors including the potential for direct acquisition of diagnostic quality images, facilitation of patient-specific imaging parameters, and reduced examination time. Real-time MRI includes not only a rapid pulse sequence but also high speed image reconstruction and easy interactivity. The frame rate of the real-time technique used should be matched to the physiological timeframes under study. Principal applications thusfar have been in localization, fluoroscopic triggering, guidance of other processes, and potentially in the generation of diagnostic images of moving structures.