• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1842-1848
• /
• 2009

This paper summarizes a data modeling for developing the baseline network analysis software of the Korean energy management system (EMS). The study is concentrated on the following aspects. First, the data for operating the each application software are extracted. Some of the EMS network application softwares are selected for basis model. Those are based on the logical functions of each software and are not considered the other softwares. Second, the common data are extracted for equipment model and topological structure of power system in Korea. We propose the application common model(ACM) that can be applied whole EMS network application softwares. The ACM model includes the hierarchy and non-hierarchy power system structure, and is connected each other using the direct and indirect link. Proposed database model is tested using the Korea Electric Power Corporation(KEPCO) system. The real time SCADA data are provided for the test. Through the test, we verified that the proposed database structure can be effectively used to accomplish the Korean EMS system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.10
• /
• pp.573-580
• /
• 2004

A new real-time constrained dispatch scheduling (CDS) is needed for TWBP. The CDS needs to be performed at every dispatch period to decide generation power of scheduling generators and amounts of scheduling load. Therefore, the CDS is not based on real generation costs but on bidding data of market participants with some constraints such as power balance, generation limits, ancillary service, and transmission line limits. This paper selects linear programming(LP) as an optimization tool for the CDS and presents effective formulae for the LP application. This paper also presents the way of minimizing the number of variables and constraints of the LP to improve real-time applicability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.281-285
• /
• 2007

Facilities of electric railway should be maintained only at night and it is necessary to maintain by human power because facilities are installed at a high place. This paper presents the development and application of a real-time data acquisition system for the characteristics measurement of overhead contact wires in electric railway. The system is designed to perform in the telemetry environments that developed to store data by wireless in a live wire state of 25 kV power source. The field test results show that the proposed technique and the developed system can be practically applied to measure characteristics of temperature, displacement, and strain on overhead contact lines.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.6-11
• /
• 2010

For real power system application of SFCL, it is necessary to develop an analysis model of the SFCL. In Korea, hybrid SFCL of the first half cycle non-limiting type have been jointly developed by KEPRI and LS Industrial Systems through DAPAS program. In this study, we developed a PSCAD/EMTDC analysis model of the hybrid SFCL of the first half cycle non-limiting type. The simulation results of the developed model are in agreement with the test results of the real SFCL. The developed SFCL model is tested in real power system model.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.214-217
• /
• 1992

This paper introduces a new methodology to apply the interpolation technique wi th optimum pattern to voltage-reactive power control of power system. The conventional tool for the optimal operation of power system is Optimal Power Flow(OPF) by standard optimization techniques. The achievement of solution through OPF programs has a defect of computation time, so that it is impossible to apply the OPF programs to the real-time control area. The proposed method presents a solution in a short period of time and an output with a good accuracy. The optimum pattern is a set of input-output pairs, where an input is a load level and a type of outage and an output is the result of OPF program corresponding to the input. The output in the OPF represents control variables of voltage-reactive power control. The interpolation technique is used to obtain the solution for an arbitrary input. As a result, the new technique helps operators in the process of the real-time voltage-reactive power control in both normal and emergency operating states.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.15-19
• /
• 2004

As the power demand has increased and power industry deregulation has progressed, the transmission and distribution system will have more complicated problems by the influence of investment reduction and NIMBY phenomena for overall power system. It is expected that the route length per MW demand will reduce gradually from 0.6[C-km/MW] to 0.53 [C-km/MW] in 2010. This comes up to a real serious problem of system planning and operational viewpoints. HTS technologies related to power system have properties to solve these complex transmission and distribution constraints, especially for metropolitan area, in the future. As the HTS technology has developed, the HTS cable technology can be the most effective alternative to solve the future expected power network constraints. This paper describes the application methodology of developing 22.9㎸ HTS cable by CAST for practical distribution system. 22.9㎸ HTS cable under development with step-by-step application methodology can substitute the existing and planning conventional 154㎸ cable. If this scheme is applied, part of downtown 154㎸ substation of metropolitan city such as Seoul can be changed into 22.9㎸ switching station. It can give great economic, environmental and additional benefits to all of the concerned authorities.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.696-698
• /
• 2007

As overhead transmission lines are exposed to the outdoor weather, lightning induced fault accounts for about 66% of faults in transmission lines. The lightning may cause the damage of power system apparatus or the shut down of electricity. Not only in order to decrease the damage of the power system itself but also to ensure the reliable power supply, an appropriate insulation design based on the long-term lightning statistics is required. Meanwhile, real time information of lightning might be more useful to quickly locate the point of lightning induced fault in the line, leading to minimization of the adverse effects derived from the fault. Korea Electric Power Corporation has been providing an on-line lightning information service, named as KLDNet, since 2006 in order to meet the need inside our company. This paper describes the development and application of the information system.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.115-122
• /
• 2020

Audiovisual (AV) facilities such as TVs and signage are installed in various public places. However, audio cannot be used to prevent noise and interference from individuals, which results in a loss of concentration and understanding of AV content. To address this problem, a total technique for remotely listening to audio from audiovisual facilities with clean sound quality while maintaining video and lip-syncing through personal smart mobile devices is proposed in this paper. Through the experimental results, the proposed scheme has been verified to reduce system power consumption by 8% to 16% and provide real-time processing with a low latency of 120 ms. The system described in this paper will contribute to the activation of audio telehearing services as it is possible to provide audio remote services in various places, such as express buses, trains, wide-area and intercity buses, public waiting rooms, and various application services.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1527-1530
• /
• 1996

Telerobot system is being developed for the application to nuclear power plants by Korea Atomic Energy Research Institute. Human-machine interaction and interface are very important elements of telerobotic systems. The main purpose of this study is developing a control system based on 3-D graphic techniques for the easy user interface and realistic visual I information supply. This system possesses the abilities for (1) virtual work, environment modelling and simulation, (2) kinematic animation include redundant behavior (3) interfacing with a real robot system, (4) transformation between real and virtual mode within the same graphics system. This system is especially focused on enhancing the overall efficiency and reliably of nozzle dam installation task inside water chamber of steam generator in nuclear power plant.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.134-136
• /
• 2001

This paper describes the application of Fuzzy Power System Stabilizer(FPSS) for improving dynamic stability of power system. The Real-coding Genetic Algorithm(RGA) was applied to optimize gains of the inputs and outputs of the FPSS. The effectiveness of the proposed FPSS was demonstrated by simulation studies for single-machine infinite system. To show the superiority of the proposed FPSS, its performances were compared with those of Conventional Power System Stabilizer(CPSS) The proposed FPSS showed better control performances than the CPSS in three-phase ground fault under a normal load which was system condition in tuning FPSS. To show the robustness of the proposed FPSS, it was applied to damp the low frequency oscillations caused by disturbances such as three-phase ground fault under heavy and light load conditions. The proposed FPSS showed better performance than CPSS in terms of the settling time and damping effect for power system operation condition.