• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.18-41
• /
• 2010

The purpose of this paper is to show the empirical measurement way for predicting the seaport efficiency by using Super SBM(Slack-based Measure) with Wilcoxson signed-rank test under CRS(constant returns to scale) condition for 20 Korean ports during 11 years(1997-2007) for 3 inputs(port investment amount, birthing capacity, and cargo handling capacity) and 5 outputs(Export and Import Quantity, Number of Ship Calls, Port Revenue, Customer Satisfaction Point for Port Service and Container Cargo Throughput). The main empirical results of this paper are as follows. First, Super SBM model has well reflected the real data according to the Wilcoxon signed rank test, because p values have exceeded the significance level. Second,Super-SBM has shown about 87% of predicting ratio for the ports efficiency and the optimal size of investment in domestic seaport. The policy implication to the Korean seaports and planner is that Korean seaports should introduce the new methods like Super-SBM method with Wilcoxon signed rank test for predicting the efficiency of port performance and the optimal size of investment as indicated by Panayides et al.(2009, pp.203-204).

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.677-685
• /
• 2006

Control of the temperature difference across a section is an effective strategy to minimize the hydration-heat-induced cracks for the structures where internal restraint is dominant. The domestic code, however, overestimates probability of the crack occurrence judging from the foreign codes and construction experiences of real structures. Therefore, the background of the equation presented in the domestic code was investigated step by step to examine validity of the equation, and, as a result, it was found that the equation is established on a basis of simple elastic model where the change of elastic modulus in an early age is not considered. An advanced assessment strategy was proposed taking into account the hypoelastic model which corresponds to an incremental constitutive equation. The presented procedure resulted in an increased crack index, i.e. decreased crack risk, the value of which depends on various conditions of the mix and structures. Also, a prediction equation of the temperature difference was proposed which can readily consider the effect of the curing condition and ambient temperature in a hand calculation. For further study, the assessment equation may be more classified to strictly consider the characteristics of the mix and structures if the analytical and experimental data are accumulated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.141-148
• /
• 2007

As Backje(B.C. 18-A.D. 600) is the whole area of Chungcheong, Jeonra, Kangwon and Gyeongsang provinces, the son of the founder of Goguryeo, King Onjoe, making the castle Wu'irae capital of the nation, founded Backje. The capital was transferred to Hansung by B.C. 5 and then to Gongju by A.D. 475. Backje governed the east of China and the northeastern coast. Due to the effect of Chinese culture there are remarkably Chinese cultural elements in dress and its ornament of Baekje. Therefore on the side of cultural part, the noble culture was formed more polished than that of Goguryeo, which affected the culture of dress and ornament. And also there were class differentiation noticeably. Baekje created splendid culture and affected the culture development of Shinra and Japan. The motive of culture creation could be the top of three countries in the foreign trade because there were geographically the widest vast plain and coastline which stretches out from north to south. Although there haven't been many materials about the cultural heritage and records more than other countries, through the modern visual point its design is fresh and more elegant those of other countries. But the fact is that there are few materials related to Baekje. What is worse, there rarely remains all original form and most of them are broken and lost. According1y, we cannot understand not only an original form of Baekje culture and but also the meaning included in it. It goes without saying that there are few materials about the clothes and fabrics. As understanding the culture of Baekje itself is insufficient, a culture enterprise utilizing it - to improve both the added value and economical achievement while combining the latest culture resources with other fields - hasn't been successful. In this study, the purpose is to improve economic power through commercialization and industrialization of the sources of the culture of Baekje. By reanalyzing a form and an image of Baekje relics, it is designed with new motif and modem preference on the condition of our peculiar cultural heritage. And while using this motif with Jacquard pattern, we made it possible to be applied to real life such as interior trinkets, etc.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.421-429
• /
• 2012

Lately, the number of interventional radiology is increased by the extension of procedure in medical radiation, and radiation exposure may be appeared differently by interventional radiologists, it is caused increase of radiation dose for radiation worker, patient, and radiologists. This study has done a comparative analysis characteristic of radiation exposure for five radiologists who executed interventional cardiology for 303 patients in S university hospital of Gyeong-Buk from Nov. 1, 2011 to Jan. 31, 2011. The average exposure time of five radiologists was 697.95sec. The average of cumulative DAP(exp) for patients was $52,730mGycm^2$ and the average of total DAP for patients was $104,875.14mGycm^2$. The average of frames for image was 855.52 frames in acquired images, and the average of frames for images was 802.2 frames in exposure images. They were statistically significant differences (p<0.05). Exposure time, cumulative DAP(fluro), cumulative DAP(exp), total DAP, acquired image, and exposure image were high correlation except cumulative DAP(exp), and acquired runs in x-ray exposure characteristics of machine. Exposure time was a great influence on radiologist. It signified that the more exposure time lead to the more radiation dose for radiologist. Radiation dose is related to ability, experience, difficulty, and precision of procedures in interventional procedure. The number of angiography and exposure time is difficult to control by radiologists. Therefore, it is in need of reasonable system which was evaluated the real dose of medical teams in interventional proceedings. We think that self education and training are required to reduce radiation dose for radiologists and radiation workers.

• Development and Reproduction
• /
• v.21 no.1
• /
• pp.47-54
• /
• 2017

Unlike mouse results, cloning efficiency of nuclear transfer from porcine induced pluripotent stem cells (piPSCs) is very low. The present study was performed to investigate the effect of cell cycle inhibitors on the cell cycle synchronization of piPSCs. piPSCs were generated using combination of six human transcriptional factors under stem cell culture condition. To examine the efficiency of cell cycle synchronization, piPSCs were cultured on a matrigel coated plate with stem cell media and they were treated with staurosporine (STA, 20 nM), daidzein (DAI, $100{\mu}M$), roscovitine (ROSC, $10{\mu}M$), or olomoucine (OLO, $200{\mu}M$) for 12 h. Flow Cytometry (FACs) data showed that piPSCs in control were in G1 ($37.5{\pm}0.2%$), S ($34.0{\pm}0.6%$) and G2/M ($28.5{\pm}0.4%$). The proportion of cells at G1 in DAI group was significantly higher than that in control, while STA, ROSC and OLO treatments could not block the cell cycle of piPSCs. Both of viability and apoptosis were affected by STA and ROSC treatment, but there were no significantly differences between control and DAI groups. Real-Time qPCR and FACs results revealed that DAI treatment did not affect the expression of pluripotent gene, Oct4. In case of OLO, it did not affect both of viability and apoptosis, but Oct4 expression was significantly decreased. Our results suggest that DAI could be used for synchronizing piPSCs at G1 stage and has any deleterious effect on survival and pluripotency sustaining of piPSCs.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.151-162
• /
• 2002

The object of this study is to develop an operating time prediction model for expressways using toll collection data. A Prediction model based on modular neural network model was developed and tested using real data. Two toll collection system(TCS) data set. Seoul-Suwon section for short range and Seoul-Daejeon section for long range, in Kyongbu expressway line were collected and analyzed. A time series analysis on TCS data indicated that operating times on both ranges are in reasonable prediction ranges. It was also found that prediction for the long section was more complex than that for the short section. However, a long term prediction for the short section turned out to be more difficult than that for the long section because of the higher sensitivity to initial condition. An application of the suggested model produced accurate prediction time. The features of suggested prediction model are in the requirement of minimum (3) input layers and in the ability of stable operating time prediction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.63-75
• /
• 2013

Roundabouts have been operated in Europe, America and Australia since the 1970s, and many relevant researches continually was carried out. Though many studies regarding roundabout have been recently conducted in korea, most of them have focused on its operational safety and efficiency. Moreover, roundabout design guideline did not define a clear criteria related to pedestrian in roundabout, but seldom investigate the influences of pedestrian on crosswalk. In this study, we seek ways to operate the pedestrian crosswalk signal on roundabout maximizing their operational effects in exceptional case such as rush hour or intersection near the special facilities. We proved that roundabout signal operation is effective under certain circumstances in according to the number of pedestrian, and suggested the optimal signal timing plan for signalized roundabouts. For pursuing the above, we conducted the simulation test using the VISSIM model. The results show that the operational effectiveness of signalized roundabout was evaluated to be better than non-signalized roundabout in specific pedestrian volume condition. In addition, those results are confirmed using simulation analysis conducted on the real roundabout.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.259-264
• /
• 2014

IEEE 802.15.4 has been emerging as the popular choice for various monitoring and control applications. In this paper, a fault management system for DC power-lines has been designed using IEEE 802.15.4, in order to monitor DC power-lines in real time, and to rapidly detect faults and shut off the line where such faults occur. Numbers were allocated for each node and unslotted CSMA-CA method of IEEE 802.15.4 was used, the performance of which was analyzed by a simulation. For such purpose, a total of 60 bits of the control data consisting of 16 bits of the current, 16 bits of the amplitude, 28 bits of the terminal state data were sent out, and the packet transfer rate and the transmission delay time of the fault management system for DC power-lines were measured and analyzed. When the traffic load was 330 packets per second or lower, the average delay time was shown to be shorter than 0.02 seconds, and when the traffic load was 260 packets per second or lower, the packet transfer rate was shown to be 99.99% or higher. Therefore, it was confirmed that the stringent condition of US Department of Energy (DOE) could be satisfied if the traffic load was 260 packets per second or lower, The results of this study can be utilized as basic data for the establishment of the fault management system for DC power-lines using IEEE 802.15.4.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.2
• /
• pp.198-205
• /
• 2011

This study was conducted to investigate the effect of feed types on Ochratoxin A (OTA) degradation by Korean native goats. Rumen fluid from canulated goats fed whole roughage or 50% roughage served as a source of micro-organisms. Experiments were undertaken i) to investigate OTA degradation ability in a $2{\times}4$ factorial arrangement with different feed types (100% roughage vs. 50% roughage) and rumen fluid fractions (whole rumen fluid, cells, autoclaved rumen fluid and supernatant) supplemented with OTA ii) to evaluate OTA degradation by the rumen fluid of goats fed two different diets at different time points (0, 3, 6, 9 and 12 h) of feeding iii) to isolate potential rumen microorganisms and iv) to identify elements responsible for OTA degradation. Rumen fluid from goats fed 100% roughage had higher (p<0.05) OTA degradability than 50% roughage diets. OTA degradation based on rumen fluid collection times showed that rumen fluid at 0 h showed significantly higher (p<0.05) degradability. Carboxypeptidase A (CPA) enzyme has been reported to be responsible for OTA degradation. Thus, using real time PCR, primers designed to target the CPA gene from Bacillus licheniformis could be amplified using genomic DNA from rumen fluid of goats and sequenced, thus enabling evaluation of the Bacillus population under different feeding condition and times. Our findings showed that the Bacillus population was significantly higher (p<0.05) before feeding (0 h) in animals which were fed a whole roughage diet, giving indirect evidence of OTA degradation being influenced by Bacillus sps. Thus, it can be concluded that OTA degradability is influenced by feed, feeding time and Bacillus licheniformis population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.246-252
• /
• 2020

Safety accidents have been reported due to falling accumulated snow from cables of cable-supported bridges. In addition to the direct damage caused by falling snow, secondary damage, such as traffic accidents, can occur. Various methods have been proposed to prevent these accidents, but there are still problems in safety and practicality. In this study, a cable robot type was selected as one of the active methods for removing accumulated snow on cables. An attempt was made to increase the climbing ability of the robot to improve the efficiency of snow removal. In addition, the available range of cable diameter for the robot can be adjusted flexibly to be applied to cables used in the field. A high-resolution camera was also installed to check the surface condition of the cable in real time to increase the utility, and be used as a cable inspection robot. A three-axis accelerometer and a tension conversion algorithm were added to measure the tension force of cables. To verify the performance, indoor and field experiments were conducted, and future improvements for the inspection robot were proposed.