• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.32-37
• /
• 2013

For The performance based fire design of the buildings, the fire characteristic such as proceeding and scale of the fire should be figured out but, there is lack of relevant information because of different conditions and difficulties of mock-up test like type of division space, ventilation condition, etc, in buildings. Therefore, in the study, a heal release rate etc, the engineering characteristic data value on the fire is proposed by mock-up fire test for division space in buildings. The mock-up fire test is carried out in a bedroom with 2.4 (L) ${\times}$ 3.6 (W) ${\times}$ 2.4 (H) m model. Initial ignition was started from trash box and the test was carried out for 30 min. As a result of the fire test, flame was broken to outside within 7 min and 50 s after starting the test and the maximum heat release rate was measured as 3,810.6 kW at 9 min and 34 s.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.101-108
• /
• 2012

The orthotropic steel deck bridge made by using relatively thin steel plate, and structural members such as transverse and longitudinal ribs, cross beam, etc. in the bridge are fabricated with complex shape by welding. Therefore, the possibility occurring deformation and defects by welding is very high, and stress states in the welded connection parts are very complex. Also, the fatigue cracks in orthotropic steel deck bridge are happening fromthe welded connection parts of secondary member than main member. However, stress evaluation for main members is mainly carried out in the design process of the bridge, detailed stress evaluation and characteristic analysis is not almost reviewed in the structural details which fatigue crack occurred. For the orthotropic steel deck bridge with open ribs which has been serviced for 29 years, in this study, the cause of fatigue crack is investigated and the fatigue safety of the bridge is examined based on fieldmeasurement by the loading test and real traffic condition. Also, structural analyses using gridmodel and detailed analysis model were carried out for the welded connection parts of longitudinal rib and diaphramthat fatigue crack occurred. Additionally, the behavior characteristics due to running vehicles were investigated by using influence area analysis for these structural details, and the occurrence causes of fatigue crack in the target bridge were clarified.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.135-141
• /
• 2010

Embryoid bodies (EBs) generated from human embryonic stem cells (hESCs) include spontaneously induced endodermal lineage cells (ELCs). Activin-A plays important roles in the endoderm differentiation of hESCs. Despite studies on the generation of ELCs from hESCs with treatment of Actvin-A, it was unclear for localization and pattern of ELCs by Activin-A during differentiation of hESCs. Accordingly in this study, we knew that Actvin-A increased the cystic EBs formation, including the highly enriched AFP (endoderm lineage specific marker)-expressing cells in the surface of cystic EBs. To induce the EBs formation from undifferentiated hESCs, cells were transferred onto petri-dish and cultured in suspension condition without bFGF removed hESC media (EB media) for 3 days. Next to investigate the effect of Activin-A, EBs were subsequently cultured in EB media supplement with 100 ng/ml Activin-A for 3 days. After 5~7 days of Activin-A treatment, cystic EBs began to appear which increased in numbers reaching ~60% of initially formed EBs over 5 days. Endoderm lineage marker, AFP were highly expressed and specifically localized at the surface region of cystic EBs comparison with normal EBs. We next attached the cystic EBs onto gelatin-coated plates and cultured for 5 days. In the results of real-time PCR and immunocytochemistry analysis, AFP-expressing cells migrated and localized at the outgrowth region of attached cystic EBs. To obtain the AFP-expressing cells of the outgrowth region, we manually isolated by using micro-dissection and cultured them. These cells strongly express AFP over 70% of isolated cells post re-plating. Here, we first showed an expression pattern of specifically localized ELCs by Activin-A during differentiation of hESCs. From this observation, we could highly purified ELCs from undifferentiated hESCs. Taken together, our system will provide a novel and efficient option to generate ELCs from hESCs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.252-258
• /
• 1998

A feeding experiment was conducted to investigate the effects of deletion of P, Ca, Zn, Mg, Fe, K, Mn, or Se from mineral premix in the diets containing $40\%$ fish meal on growth performance of juvenile Korean rockfish. Three replicate groups of the fish initially averaging 5.4 g were fed the experimental diets deleted one ot each mineral (P, Ca, Zn, Mg, Fe, K, Mn, Se or all) in the mineral premix for 9 weeks. A basal diet with fish meal ($40\%$), meat meal ($9\%$), soybean meal ($5\%$), corngluten meal ($3\%$), and leather meal ($3\%$) as protein sources were included. Weight gain in fish fed diets deleted Ca, Zn, K, or Se was lower than that of control diet ( P<0.05). Daily feed intake, condition factor, hepatosomatic index and liver chemical composition were not affected by dietary mineral premixes (P>0.05). Apparent skeletal deformities were not observed in the diets deleted each mineral, The data obtained in this study indicate that each of the Ca, Zn, K, or Se should be added in the diet contained $40\%$ fish meal for normal growth of Korean rockfish.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.284-287
• /
• 2000

Recently, developing medical devices have a tendency becoming the module for satisfying user's mutual complex needs. Because the most effective method for the observation of patients condition a diagnosis and a treatment is collecting data from various devices and controling operation following it. Module tendency is more popular due to manage easily totally many individual systems. This study implemented communication protocol to control by one control system connecting modular medical devices. Implemented system consist of one master module controlling all module and managing communication and many Slave modules. Communication between each modules introduced SPI(Serial Peripheral Interface) among many synchronous serial communication methods for the exact transmission and receipt of data. All communication executes by packet format. This can detect error. And, this protocol introduced PNP(Plug And Play) function that auto-detect connecting or removing module during running. This protocol exactly transmitted and received in faster speed more than 1Mbps. And in practical application to the ventilator this confirmed to give and take real-time data. And various functions by th central control system is implemented in this protocol.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.333-338
• /
• 2008

The evaluation for the visage volume was performed with human and dummy face using PRIMOS $body^{(R)}$. Three researchers measured the dummy face attached different volume of clay (6.6 mL, 13.2 mL, and 19.8 mL). It is identified that the high correlation between measured values and real volume ($R^2=0.99$). The percent (%) of relative standard deviation (RSD) of the data was shown below 10%. In Gage R&R analysis, the percent of contribution, the percent of study variation and distinct categories values were 0.78%, 8.85%, and 15% respectively. Therefore this method was regarded as the good standard condition in aspect of reproducibility and repetitiveness of data. The face volume variation was measured by PRIMOS $body^{(R)}$ on the face in participated 10 healthy Korean women volunteers. Subjects used the product once a day for two weeks as night sleeping pack. After application of the test products, the 3D image data of face were taken 1 and 2 weeks later. We found the face volume was significantly decreased after using products. In conclusion, this novel non-invasive technique was useful in measuring and visualizing alterations in face volume as a consequence of certain treatments. This system will provide a rapid and precise analysis of 3D topographical information for face.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.171-179
• /
• 2015

The objectives of this research have been focussed on 1) developing prediction techniques for the flash flood and landslide based on rainfall prediction data in agricultural area and 2) developing an integrated forecasting system for the abrupt disasters using USN based real-time disaster sensing techniques. This study contains following steps to achieve the objective; 1) selecting rainfall prediction data, 2) constructing prediction techniques for flash flood and landslide, 3) developing USN and communication network protocol for detecting the abrupt disaster suitable for rural area, & 4) developing mobile application and SMS based early warning service system for local resident and tourist. Local prediction model (LDAPS, UM1.5km) supported by Korean meteorological administration was used for the rainfall prediction by considering spatial and temporal resolution. NRCS TR-20 and infinite slope stability analysis model were used to predict flash flood and landslide. There are limitations in terms of communication distance and cost using Zigbee and CDMA which have been used for existing disaster sensors. Rural suitable sensor-network module for water level and tilting gauge and gateway based on proprietary RF network were developed by consideration of low-cost, low-power, and long-distance for communication suitable for rural condition. SMS & mobile application forecasting & alarming system for local resident and tourist was set up for minimizing damage on the critical regions for abrupt disaster. The developed H/W & S/W for integrated abrupt disaster forecasting & alarming system was verified by field application.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.18-41
• /
• 2010

The purpose of this paper is to show the empirical measurement way for predicting the seaport efficiency by using Super SBM(Slack-based Measure) with Wilcoxson signed-rank test under CRS(constant returns to scale) condition for 20 Korean ports during 11 years(1997-2007) for 3 inputs(port investment amount, birthing capacity, and cargo handling capacity) and 5 outputs(Export and Import Quantity, Number of Ship Calls, Port Revenue, Customer Satisfaction Point for Port Service and Container Cargo Throughput). The main empirical results of this paper are as follows. First, Super SBM model has well reflected the real data according to the Wilcoxon signed rank test, because p values have exceeded the significance level. Second,Super-SBM has shown about 87% of predicting ratio for the ports efficiency and the optimal size of investment in domestic seaport. The policy implication to the Korean seaports and planner is that Korean seaports should introduce the new methods like Super-SBM method with Wilcoxon signed rank test for predicting the efficiency of port performance and the optimal size of investment as indicated by Panayides et al.(2009, pp.203-204).

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.677-685
• /
• 2006

Control of the temperature difference across a section is an effective strategy to minimize the hydration-heat-induced cracks for the structures where internal restraint is dominant. The domestic code, however, overestimates probability of the crack occurrence judging from the foreign codes and construction experiences of real structures. Therefore, the background of the equation presented in the domestic code was investigated step by step to examine validity of the equation, and, as a result, it was found that the equation is established on a basis of simple elastic model where the change of elastic modulus in an early age is not considered. An advanced assessment strategy was proposed taking into account the hypoelastic model which corresponds to an incremental constitutive equation. The presented procedure resulted in an increased crack index, i.e. decreased crack risk, the value of which depends on various conditions of the mix and structures. Also, a prediction equation of the temperature difference was proposed which can readily consider the effect of the curing condition and ambient temperature in a hand calculation. For further study, the assessment equation may be more classified to strictly consider the characteristics of the mix and structures if the analytical and experimental data are accumulated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.141-148
• /
• 2007

As Backje(B.C. 18-A.D. 600) is the whole area of Chungcheong, Jeonra, Kangwon and Gyeongsang provinces, the son of the founder of Goguryeo, King Onjoe, making the castle Wu'irae capital of the nation, founded Backje. The capital was transferred to Hansung by B.C. 5 and then to Gongju by A.D. 475. Backje governed the east of China and the northeastern coast. Due to the effect of Chinese culture there are remarkably Chinese cultural elements in dress and its ornament of Baekje. Therefore on the side of cultural part, the noble culture was formed more polished than that of Goguryeo, which affected the culture of dress and ornament. And also there were class differentiation noticeably. Baekje created splendid culture and affected the culture development of Shinra and Japan. The motive of culture creation could be the top of three countries in the foreign trade because there were geographically the widest vast plain and coastline which stretches out from north to south. Although there haven't been many materials about the cultural heritage and records more than other countries, through the modern visual point its design is fresh and more elegant those of other countries. But the fact is that there are few materials related to Baekje. What is worse, there rarely remains all original form and most of them are broken and lost. According1y, we cannot understand not only an original form of Baekje culture and but also the meaning included in it. It goes without saying that there are few materials about the clothes and fabrics. As understanding the culture of Baekje itself is insufficient, a culture enterprise utilizing it - to improve both the added value and economical achievement while combining the latest culture resources with other fields - hasn't been successful. In this study, the purpose is to improve economic power through commercialization and industrialization of the sources of the culture of Baekje. By reanalyzing a form and an image of Baekje relics, it is designed with new motif and modem preference on the condition of our peculiar cultural heritage. And while using this motif with Jacquard pattern, we made it possible to be applied to real life such as interior trinkets, etc.