• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.109-114
• /
• 2015

A circularly polarized small UHF RFID reader antenna is presented. The antenna is composed of four elements and printed on the plastic substrate(${\varepsilon}_r=2.2$, t=5mm). Each element is fed by a probe which is sequentially connected to the feed line. The feed line is manufactured on the FR-4 substrate(t=1.0mm, ${\varepsilon}_r=4.7$). The simulation results shows that the antenna can be achieved a return loss of 12dB, gain of 3.46dBic over the UHF band of 902-928MHz. According to our simulation results, two prototype antennas are manufactured and measured. The obtained antennas operate in UHF RFID bands and can be adapted for various portable applications. In addition, a parametric study is conducted to facilitate the design and optimization processes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.132-140
• /
• 2009

For human exposure assessment of UHF RFID system, electric field distribution of commercial 900[MHz] RFID antenna was measured and analyzed. Also, SAR(Specific Absorption Rate) of RFID antenna was calculated by simulation, and compared with basic restrictions in EMF guidelines. For EMF exposure assessment according to EN and IEC standards, the reader was tested for the normal operation, and electric field from RFID antenna was measured at various distances and angles. For electric field measurement, narrow band isotropic electric field probe was used, and the measurements were made at 0.3, 0.5, 1.0 and 1.5[m] for every 15[$^{\circ}$] angle from the antenna. Also, the rationale for measurement distance in EN and IEC standards is analyzed from the measurement results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.55-56
• /
• 2009

Small RFID tag antenna were fabricated on Si substrate and their physical and electrical properties were evaluated. With decreasing the size of tag antenna on Si substrate, small SMD-type RFID tags could be fabricated, which is very useful for PCB tracking. Firstly, tag antenna pattern and the electromagnetic properties were simulated with HFSS. The frequency was 13.56MHz, the line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from geometry. When the line-width and line-gap were 100um and the loop-turn was 10, the SRF was 80MHZ and the Q value was ca. 9. When the microstrip antenna pattern of aluminum was fabricated by using DC sputtering, Vpp of ca. 1.6V was obtained when the reader-tag distance was 40mm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.249-254
• /
• 2014

We have studied on the possibility of railway stability system using RFID tag. UHF RFID tag was desinged, manufactured and tested. Proposed UHF tag antenna has PIFA type structure and inset feed multi matching technique was attempted for impedance matching of antenna. The impedance bandwidth (VSWR < 3) of the proposed tag antenna covers 917~923 MHz. Measured peak gain is 3.225 dBi and UHF band with an omni-directional radiation pattern. RFID reader and tag installed in motor car and track, respectively. Then, tag recognition rate according to velocity of car (under 45 km/h) represented 100 %.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.506-511
• /
• 2011

In this paper, a rectenna for wireless power transmission at 900MHz is proposed. Rectenna is a device transforming RF power into DC power and it may consist of a antenna, rectifying and charging circuits. In this paper, we designed a slot antenna to receive 900MHz signal, a rectifying circuit of about 40% efficiency at 0dBm input, and a charging circuit to store a weak power signal and supply constant voltage to load. From the experiment using a RFID reader as a transmitter for 1W power, it was found that the proposed rectenna receiving about 0dBm power can supply 3.3V constant voltage to 50$k{\Omega}$ load during 280sec.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.456-461
• /
• 2011

In this paper, design and Implementation of single antenna RFID Shelf for FIFO management of marine materials, and propose a design as one effective solution of the problem. The goals of the proposed design and system are as follows: cost saving, RFID data validation. Cost problem occurs by the use of many RFID readers. Data problems in the steel structure is generated by the use of radio wave (RFID). In addition, material data from RFID Shelf system, is expected to be used FIFO design information for the vessel information system. Through the proposed RFID Shelf System, it is expected to systematic management and efficient business processes for the vessel information system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.182-187
• /
• 2009

In this paper, the power management module of wireless sensor node is designed and fabricated utilizing RF energy from reader antenna of commercial RFID system, which is mainly categorized in the energy harvesting. For this, the rectenna and the high efficient boost converter is designed to get the DC power from RF power for the charging the battery. When the RF power from RFID reader antenna is 1.2[W], the DC power of 3.1[mW] at the distance of 1[m] and 1[mW] at 5.5[m] are obtained. Considering the connection to the battery, the boost converter for enhancing the conversion efficiency is designed. The conversion efficiency at the distance of 4[m] is 79.3[%] and the harvested power is 1.36[mW] which is actually used for the charging the battery. This value is available in the wireless sensor networking.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.221-226
• /
• 2010

Ubiquitous computing is technology that provides services appropriate for the user. At places where environmental and situational context are relevant in making the determination of what services are appropriate, there are sensor nodes installed, which automatically collect, manage and control environmental information. In this computing environment, in order to meet the requirements of services provided to users, a context awareness system is needed for context awareness processing. In this thesis, using RFID/USN sensors, the context of a user entering and leaving an area was produced, and the user's identification information was received via the RFID reader and antenna. At the same time, to decide whether or not to allow access for the user, a distance sensor node was installed to collect context data. Based on this, a system that provides practical services needed in real life for users was designed and implemented. The context of a user entering an area was produced, which the system recognized and provided appropriate services for the user.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1468-1474
• /
• 2009

This paper shows an UHF RFID metallic tags using a Cavity structure for a long reading range. The reading range of a general passive tag is limited because the EIRP of a reader system is limited as 36㏈m by ISO 18000-6. To extend the reading range, the tag antenna should have a high gain antenna structure. The designed tag antenna is recognized over 10m range with a Cavity structure. The directivity pattern and the performance of the tag with the Cavity structure is stable when it is attached to a metallic object. The designed tag antenna has two kinds as cavity thickness. The sizes of designed tag antennas are $176\;{\times}\;52\;{\times}\;10\;mm$ and $176\;{\times}\;61\;{\times}\;30mm$ They can be attached to a large metallic materials and heavy equipments. The measured reading ranges of the tags are about 11m and 15m when they are attached to a metallic object.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.679-684
• /
• 2017

This paper presents an UHF(Ultra High Frequency) band small cavity structured RFID(Radio Frequency Identification) tag antenna with a long reading range, designed to apply on metal cart or pallet for auto-parts logistics. The size of tag antennas is $140{\times}60{\times}10mm^3$, attached on a exporting metal cart, and it can give the information of inventory and logistics of carts. By collecting the exported carts and increasing the recovery rate of missing carts or pallets, the paid import tax can be refunded when the carts are returned back to the manufacture. The tag antenna was equipped with a cover to prevent damage, and the dielectric constant of the cover is considered for the simulation. The reading range of the tag antenna is 12 m using LP(Linear Polarization), 10 m with CP(Circular Polarization) reader antennas. This 920 MHz UHF RFID cavity tag ensures the long reading distance of the antenna regardless of the material of the object where it is attached.