• 한국연소학회지
• /
• 제4권2호
• /
• pp.63-74
• /
• 1999

The effects of EGR and premixedness on NO formation have been numerically investigated. The flame structure is classified into three categories; premixed flame($=1)$, rich/lean premixed flame(${\alpha}=0.6$ and 0.8) and diffusion flame(${\alpha}=0$). NO formation/destruction mechanisms are assorted to thermal, reburn and Fenimore mechanisms. The temperature of unburned gas is arranged to 298 and 500 K to have access to the condition in a real internal combustion engine. The results show that all three NO formation/destruction reaction rates in the fuel rich flame zone could be decreased by EGR for rich/lean premixed flames, while those in the fuel lean flame zone are not significantly changed. Near the stagnation plane, however, only the thermal NO reaction rate is decreased. The contribution of reburn and Fenimore mechanisms for the net NO production becomes less significant as the premixedness of a flame increases. The larger amount of NO reduction with EGR is expected under the higher temperature and/or higher fuel/air premixedness conditions due to the increased contribution of the thermal mechanism. The role of Fenimore and reburn mechanisms could be important for rich premixed and diffusion flames; therefore, the effect of EGR on NO reduction could vary with fuel/air premixedness. The premixedness of a partially premixed flame changes the flame structure and could affect the NO production characteristics.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.982-990
• /
• 1999

YSZ/LSM composite cathode was fabricated by dip-coating of YSZ sol on the internal pore surface of a LSM cathode followed by sintering at low temperature (800-100$0^{\circ}C$) The YSZ coating significantly increased the TPB(Triple Phase Boundary) where the gas the electrode and the electrolyte were in contact with each other. Sinter the formation of resistive materials such as La2Zr2O7 or SrZrO3 was prevented due to the low processing temperature and TPB was increased due to the YSZ film coating the electrode resistance (Rel) was reduced about 100 times compared to non-modified cathode. From the analysis of a.c impedance it was shown that microstructural change of the cathode caused by YSZ film coating affected the oxygen reduction reaction. In the case of non-modified cathode the RDS (rate determining step) was electrode reactions rather than mass transfer or the oxygen gas diffusion in the experimental conditions employed in this study ($600^{\circ}C$-100$0^{\circ}C$ and 0,01-1 atm of Po2) for the YSZ film coated cathode however the RDS involved the oxygen diffusion through micropores of YSZ film at high temperature of 950-100$0^{\circ}C$ and low oxygen partial pressure of 0.01-0.03 atm.

• 한국응용곤충학회지
• /
• 제18권1호
• /
• pp.11-14
• /
• 1979

짙은 연색의 모자익병징을 나타내는 이병 시금치를 채집하여 Broad bean wilt virus(BBWV)를 분리동정 하였다. 분리된 Broad bean wilt virus (BBWV)를 지표식물에 즙액접종한 결과, 명아주(Chenopodium amaranticolor), 명아주(Chenopodium quinoa) ,잠두(Vicia faba)에서는 접종엽에 국부병반이 나타났고 접종상엽에서는 모자익(전신감염)병징이 나타났으며 꽈리(Physalis floridana), 시금치, 담배 (W.B), 담배 (Nicotiana glutinosa)에는 모자익 병징이 나타났다. 이병시금치로부터 분리한 병원바이러스와 BBWV의 항혈청을 한천내확산법(Agar gel-diffusion test)으로 반응시킨 결과 양성 반응이 나타났다. 이병엽을 Dip법으로 시료를 제작하여 전자현미경에서 검경한 결과 구형의 입자가 관찰되었으며 직경은 25nm이었다. 시금치 재배포장에서 BBWV의 발생분포는 수원, 안양, 대구 진주 등 거의 전국적으로 발생하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.715-720
• /
• 2004

Amineterminated, ethylenediamine core polyamidoamine starburst dendrimers of generation 2 (G2), generation 4 (G4) and generation 6 (G6) have been successfully surface-modified via an amide coupling reaction with 4-ethyl, 4'-(3-propionic) bipyridinium cation and the electrochemical behavior of the resulting dendrimers were investigated in aqueous potassium chloride electrolyte solutions. The 1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide-mediated reaction resulted in 25-39% end-group functionalization. The water-soluble 4-ethyl, 4'-(3-propylamide) bipyridinium dibromide dendrimers (G2-V2+, G4-V2+ and G6-V2+) were characterized by $^1H$ NMR and UV-Vis spectroscopic methods. The cyclic voltammetric and chronoamperometric experiments were performed to determine the diffusion coefficient and the number of electrons transferred in the process of the first reduction of the viologen-functionalized dendrimers. Adsorption of viologen-functionalized dendrimers at electrode surface was evidenced in the voltammograms. Experimentally determined diffusion coefficients were in good agreement with the values expected from the Stokes-Einstein relation, while the number of electrons transferred concurred with the extent of functionalization determined by $^1H$ NMR and UV-Vis spectra.

• Journal of applied mathematics & informatics
• /
• 제35권3_4호
• /
• pp.277-302
• /
• 2017

In this paper, we have proposed a numerical method for Singularly Perturbed Boundary Value Problems (SPBVPs) of reaction-diffusion type of third order Ordinary Differential Equations (ODEs). The SPBVP is reduced into a weakly coupled system of one first order and one second order ODEs, one without the parameter and the other with the parameter ${\varepsilon}$ multiplying the highest derivative subject to suitable initial and boundary conditions, respectively. The numerical method combines boundary value technique, asymptotic expansion approximation, shooting method and finite difference scheme. The weakly coupled system is decoupled by replacing one of the unknowns by its zero-order asymptotic expansion. Finally the present numerical method is applied to the decoupled system. In order to get a numerical solution for the derivative of the solution, the domain is divided into three regions namely two inner regions and one outer region. The Shooting method is applied to two inner regions whereas for the outer region, standard finite difference (FD) scheme is applied. Necessary error estimates are derived for the method. Computational efficiency and accuracy are verified through numerical examples. The method is easy to implement and suitable for parallel computing. The main advantage of this method is that due to decoupling the system, the computation time is very much reduced.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1087-1096
• /
• 2001

The dynamic structures of unsteady CH$_4$/Air jet diffusion flame with a flame-vortex interaction were numerically investigated. A timed-dependent, axisymmetric computational model and a low mach number approximation were employed in the present calculation. A two-step global reaction mechanism which considers 6 species, was used to calculate the reaction rates. The predicted results including the gravitational effect show that the large outer vortices and the small inner vortices can be well simulated without any additional disturbances near nozzle tip. It was found that the temperature and species concentrations have deviated values even for the same mixture fraction in the flame-vortex interaction region. It was also shown that the flame surface is not deformed by the inner vortex in upstream region, while in downstream region, the flame surface is compressed or stretched by the outer vortex roll-up. The present unsteady jet flame configuration accompanying a flame-vortex interaction is expected to give good implications for the unsteady structures of turbulent flames.

• 신재생에너지
• /
• 제2권4호
• /
• pp.78-85
• /
• 2006

Selection of flow channel in the separation plate of PEMFC is very important parameter to improve its performance and reduce parasite loss. Flow patterns in the channel have great influence on the transport of hydrogen and air and removal of water generated from electrochemical reaction in diffusion layer. In this study. fluid flow in flow channel with parallel and interdigitated patterns are simulated three dimensionally on full flow domain including anode and cathode channel together. The numerical results show that the fuel cell with interdigitated flow channel represents better performance than that with parallel flow channel due to its strong convective transport across the gas diffusion layer. But the pressure drop in parallel flow channel is much more than that in interdigitated flow channel. And effects of temperature and stoichiometric number on performance can be calculated and analyzed as well. Nomenclature.

• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.1015-1020
• /
• 2003

$\rho$-알루미나 결합 진동성형용 알루미나 캐스터블 내화물의 매트릭스부분과 용응 슬래그와의 침식거동을 젭센(Jabsen)이 주장한 이론을 기초로 하고 킹거리(Kingery)가 제안한 반응 기구를 통해 규명하였다. 매트릭스 부분의 초기침식이 분자확산거동에 의하여 지배되며, 아레니우스 관계식과 잘 일치하고 있어 온도의존성 활성화 과정으로 받아들 수 있다. 슬래그와 경계층의 Ca 농도차이가 23.2%로서 경계층을 형성하기 위한 물질이동의 구동력이 되었다. 매트릭스의 침식정도가 뮬라이트 소결체보다 심하지만 킹거리의 침식반응 기구와 잘 일치하고 있어 캐스터블의 수명예측이 가능하다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.23-30
• /
• 1998

The stabilization characteristics of diffusion flame formed in the wake of a cylindrical flame holder were investigated. Distribution of turbulence intensity, concentration distribution of combustion gas, and ion currents were measured. The turbulence intensity in the wake of cylindrical- game holder is increased with increase of diameter or blockage ratio of grid. If the auxiliary fuel is injected into recirculation zone, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.278-285
• /
• 2005

연속식 유동층 반응기에서 흡착제인 천연망간광석을 이용한 탈황반응과, grain model과 two-phase 이론에 근거한 탈황 모사를 연구하였다. 입자 내의 기공 구조변화를 고려한 grain model을 통하여 탈황 반응시간, 천연망간광석의 입자 크기, 기공 내에서 $SO_2$의 확산속도에 대한 영향을 고찰한 결과, 입자의 기공 내에서 $SO_2$ 가스 확산이 탈황 반응의 가장 중요한 요소로 나타났다. 또한, 연속식 유동층 반응기에서 흡착제인 천연망간광석을 이용한 탈황반응 실험결과는 grain model과 two-phase 이론과 잘 일치하였으며, 탈황 결과를 잘 예측할 수 있었다.