• 대한한방소아과학회지
• /
• 제13권1호
• /
• pp.191-204
• /
• 1999

Background: Nasal polyps are benign mass of nasal mucose, chronic sinusitis are swelling of nasal mucose, so nasal polyps and chronic sinusitis take a place at the same time. Nasal polyps are located lateral wall of nose, middle meatus, between middle nasal concha and inferior nasal concha. Objective: To demonstrate the effect of herbal medicine therapy in the chronic sinusitis and nasal polyps before and after treatment using computed tomography (CT). To compared before and after treatment of otitis media using earscope. Materials and methods: Five patients (4 mail and 1 femail) treated in our hospital between August 1998 and July 1999 were studied. Ages ranged from 9 to 23 years (mean age:13 years). All patients had a underlying family history, and past history(allergy or sinusitis of parents or brothers). Illness period was from 1 to 36 months (mean period:10.5 month). To ascertain the efficacy of treatment, CT were checked out. In the CT, three images were obtained 2cm interval on the coronal and axial plan. We classified treatment period into the type of allergic disease. Gamihyunggyeyungyo-tang was administered mainly. Gamigwaghyangjeungki-san, Gamizwakwi-eum and Gamihyangso-san were administered for through oral route additional symptoms. Results: Treatment period was from 126 to 157 days (mean period:140.7 days). To 3 patients with chronic sinusitis and nasal polyp, treatment period was 140.7 days, to 2 patients with otitis media and chronic sinusitis and nasal polyp, treatment period was 141.5 days. So they had no significance. Not nasal polyp from middle meatus, but also polypoid mucosal change of maxillary sinus is polyps Conclusion: We know that herbal medicine therapy is the effective treatment of pediatric chronic sinusitis and otitis media using earscope and CT. Herbal medicine therapy was effective in increasing immunity, inhibiting allergic reaction and inflammation of respiratory system. we practice ECP(eosinophil cataionic protein) and MAST examination, objectify herbal medicine therapy.

• 한국표면공학회지
• /
• 제37권6호
• /
• pp.360-365
• /
• 2004

Ti$_3$SiC$_2$ material was synthesized via the powder metallurgical route, and oxidation tested between 900 and $1200^{\circ}C$ in air for up to 100 hr. The oxidation of $Ti_3$$SiC_2$ material resulted in the formation of $TiO_2$and $SiO_2$, accompanying the evolution of CO or $CO_2$ gases from the initial stage of oxidation. The oxidation resistance of $Ti_3$$SiC_2$ mainly owes the protectiveness of highly stoichiometric $SiO_2$. During the initial stage of oxidation, the dominant reaction was the inward transport of oxygen into the matrix. As the oxidation progressed, an outer $TiO_2$ layer and an inner ( $TiO_2$ + $SiO_2$) mixed layer formed. Between these layers and inside the oxide scale, numerous fine voids formed. Numerous, fine oxide grains formed at $900^{\circ}C$ developed into the outer coarse $TiO_2$ grains and an inner fine ($TiO_2$ + $SiO_2$) mixed grains at the higher temperatures. The oxidation resistance of$ Ti_3$SiC$_2$ progressively deteriorated as the oxidation temperature increased, forming thick scales above $1000^{\circ}C$. The outer coarse $TiO_2$ grains formed above $1100^{\circ}C$ grew rapidly mainly along (211).

• 한국운동역학회지
• /
• 제23권2호
• /
• pp.179-187
• /
• 2013

This case study was conducted to determine the effects of water exercise on the foot pressure distribution (FPD) of persons who have a hemiplegia. A 43-year old female with hemiplegia acquired at the age of 3 years was selected from a local disability program. A 12-week water exercise program (60 min. per session and twice a week) focusing on gait training was developed and implemented as the intervention of this study. A recent product of the Pedar-X (Novel, Germany) was used to measure the FPD of hemiplegic gait before and after the intervention. Variables considered in this study included the average pressure (AP), contact area (CA), maximum pressure (MP), ground reaction force (GRF), and center of pressure (COP). The data collected were analyzed via the descriptive statistics and qualitative analyses on the graphical presentations of the FPD. Results revealed that the AP and CA of the hemiplegic foot was considerably increased before and after the intervention. Similar results were also found in the MP and GRF. Additionally, the graphical route of the COP related to hemiplegic foot was changed in a positive way after the intervention. It can be concluded that water exercise may be beneficial to restore hemiplegic gait. Limitations related to measurement and generalizability are further discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.317.2-317.2
• /
• 2013

Ultrathin oxide encapsulated metal-oxide hybrid nanocatalysts have been fabricated by a soft chemical and facile route. First, SiO2 nanoparticles of 25~30 nm size have been synthesized by modified Stobber's method followed by amine functionalization. Metal nanoparticles (Ru, Rh, Pt) capped with polymer/citrate have been deposited on functionalized SiO2 and finally an ultrathin layer of TiO2 coated on surface which prevents sintering and provides high thermal stability while maximizing the metal-oxide interface for higher catalytic activity. TEM studies confirmed that 2.5 nm sized metal nanoparticles are well dispersed and distributed throughout the surface of 25 nm SiO2 nanoparticles with a 3-4 nm TiO2 ultrathin layer. The metal nanoparticles are still well exposed to outer surface, being enabled for surface characterization and catalytic activity. Even after calcination at $600^{\circ}C$, the structure and morphology of hybrid nanocatalysts remain intact confirm the high thermal stability. XPS spectra of hybrid nanocatalyst suggest the metallic states as well as their corresponding oxide states. The catalytic activity has been evaluated for high temperature CO oxidation reaction as well as photocatalytic H2 generation under solar simulation. The design of hybrid structure, high thermal stability, and better exposure of metal active sites are the key parameters for the high catalytic activity. The maximization of metal-TiO2 interface interaction has the great role in photocatalytic H2 production.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.525-533
• /
• 2014

금속이 도핑 된 산화아연 나노클러스터를 합성하기 위해 마이크로웨이브를 이용한 폴리올 공정은 빠르고 경제적인 합성 방법이다. 디에틸렌글리콜은 높은 분극률과 마이크로파의 흡수 능력이 뛰어나며, 높은 온도상승 비율과 반응시간을 짧게 해준다. 본 연구에서는 금속이 도핑 된 산화아연 나노클러스터를 합성하기 위해서 첨가되는 seed의 부피비를 다르게 하여 얻었으며, 전구체로는 아세트산 아연 2수화물, 도핑 금속은 아세트산 금속 염을 그리고 용매로서 디에틸렌글리콜을 사용하였다. 금속이 도핑된 산화아연 클러스터는 FE-SEM, XRD, Raman, PSA로 특성을 확인하였다.

• 접착 및 계면
• /
• 제1권1호
• /
• pp.38-46
• /
• 2000

Phosphine oxide와 불소를 함유하는 단량체(bis(3-aminophenyl) 3,5-bis (trifluoromethyl) phenyl phosphine oxide (mDA6FPPO))를 Grignard 반응에 의하여 합성한 다음, 이를 PMDA, 6FDA, BTDA 또는 ODPA와 함께 폴리이미드 합성에 사용하였다. 폴리이미드는 폴리아믹산을 합성한 후 이를 이미드화시키는 방법을 사용하였으며, FT-IR, NMR, DSC 및 점도측정기를 이용하여 분석하였다. 또한 T-peel 시험으로 접착강도를 측정하였다. Phosphine oxide를 함유하는 bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) 및 상용의 3.3'-diamino diphenyl sulfone (mDDS)로부터 합성된 폴리이미드와 비교하였다. 본 연구에서 합성된 mDA6FPPO를 사용하여 만들어진 폴리이미드는 높은 $T_g$, 우수한 용해도 및 접착성을 보였다.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.265-278
• /
• 2021

When a dangerous event arises for people inside a building and an immediate evacuation is required, it is important that suitable routes have been previously defined. These situations can happen especially when buildings are crowded, making the occupants have a very high vulnerability and can be trapped if they do not evacuate quickly and safely. However, in most cases, routes are considered based just on their proximity or short distance to the exit areas, and evacuation simulations that include more variables are not performed. This work aims to propose a methodology for building's indoor evacuation activities under the premise of processing simulation scenarios in multi-agent environments. In the methodology, importance indexes of simplified and validated geometry data from a BIM (Building Information Modeling) are considered as heuristic input data in a proposed algorithm. The algorithm is based on AP-Theta^* pathfinding and collision avoidance machine learning techniques. It also includes conditioning variables such as the number of people, speed of movement as well as reaction ability of the agents that influence the evacuation times. Moreover, collision avoidance is applied between people or with objects along the route. The simulations using the proposed algorithm are tested in NetLogo for diverse scenarios, showing feasible evacuation routes and calculating evacuation times in a multi-agent environment. The experimental results are obtained by applying the method in a study case and demonstrate the level of effectiveness of the algorithm, and the influence of the conditioning variables analyzed together when performing safe evacuation routes.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.469-476
• /
• 2019

A lead-free bulk ceramic having a chemical formula $Ba_{0.8}Ca_{0.2}(Ti_{0.8}Zr_{0.1}Ce_{0.1})O_3$ (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.325-330
• /
• 2021

Bi₂MoO₆ (BMO) via the structure-directing role of CO(NH₂)₂ is successfully prepared via a facile solvothermal route. The structure, morphology, and photocatalytic performance of the nanoflake BMO are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), fluorescence spectrum analysis (PL), UV-vis spectroscopy (UV-vis) and electrochemical test. SEM images show that the size of nanoflake BMO is about 50 ~ 200 nm. PL and electrochemical analysis show that the nanoflake BMO has a lower recombination rate of photogenerated carriers than particle BMO. The photocatalytic degradation of tetracycline hydrochloride (TC) by nanoflake BMO under visible light is investigated. The results show that the nanoflake BMO-3 has the highest degradation efficiency under visible light, and the degradation efficiency reached 75 % within 120 min, attributed to the unique hierarchical structure, efficient carrier separation and sufficient free radicals to generate active center synergies. The photocatalytic reaction mechanism of TC degradation on the nanoflake BMO is proposed.

• 공업화학
• /
• 제34권5호
• /
• pp.556-565
• /
• 2023

Fast industrial and agricultural expansion result in the production of heavy metal ions (HMIs). These are exceedingly hazardous to both humans and the environment, and the necessity to eliminate them from aqueous systems prompts the development of novel materials. In the present study, a UIO-66 (COOH)₂ metal-organic framework (MOF) containing free carboxylic acid groups was post-synthetically modified with L-glutamic acid via the solid-solid reaction route. Pristine and glutamic acid-treated MOF materials were characterized in detail using several physicochemical techniques. Single-ion batch adsorption studies of Pb(II) and Hg(II) ions were carried out using pristine as well as amino acid-modified MOFs. We further examined parameters that influence removal efficiency, such as the initial concentration and contact time. The bare MOF had a higher ion adsorption capacity for Pb(II) (261.87 mg/g) than for Hg(II) ions (10.54 mg/g) at an initial concentration of 150 ppm. In contrast, an increased Hg(II) ion adsorption capacity was observed for the glutamic acid-modified MOF (80.6 mg/g) as compared to the bare MOF. The Hg(II) ion adsorption capacity increased by almost 87% after modification with glutamic acid. Fitting results of isotherm and kinetic data models indicated that the adsorption of Pb(II) on both pristine and glutamic acid-modified MOFs was due to surface complexation of Pb(II) ions with available -COOH groups (pyromellitic acid). Adsorption of Hg(II) on the glutamic acid-modified MOF was attributed to chelation, in which glutamic acid grafted onto the surface of the MOF formed chelates with Hg(II) ions.